Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2412.10109

Large-format photodetecting system pCam6060 with a GSENSE6060BSI CMOS detector, developed at SAO RAS and optimized for photometric methods

I. Afanasieva·V. Murzin·V. Ardilanov·N. Ivaschenko·M. Pritychenko
View original source ↗Read source document ↗Export metadata ↓

Abstract

The pCam6060 photodetecting system was developed at SAO RAS and is based on the GSENSE6060BSI photodetector manufactured by GPixel (China) with a frame format of 6144x6144 active pixels and a pixel size of 10 mkm. The readout speed reached 11 fps. The back-illuminated detector has a wide spectral range of 200-1040 nm with a minimum quantum efficiency (QE) of 10% and maximum sensitivity of 95% at 580 nm. The quantum efficiency in the near-infrared range was 58% at 850 nm. The pCam6060 system controller implements a mode of simultaneous image readout via two 12-bit video channels with different gain and their subsequent combination in the controller into a single frame with an extended 16-bit dynamic range. This method simultaneously achieves a low readout noise level (about 3 e-) in the high-gain channel and a large dynamic range (full well capacity of about 100000 e-) in the low-gain channel. Back-illuminated CMOS detectors, unlike front-illuminated devices, do not have the effect of long-term preserving the residual charge from previous exposures, which makes them suitable for recording faint objects in photometric long-exposure observation methods. Communication between the host computer and the camera was carried out via a fiber optic line at distances of up to 50 m. Video data are recorded on the computer hard drive in real-time. The pCam6060 photodetecting system is designed for astronomical applications and has a moisture-proof design.

Explore related subjects

astro-ph.IMphysics.ins-det

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

I. Afanasieva, V. Murzin, V. Ardilanov, N. Ivaschenko, M. Pritychenko. 2024-12-13. Large-format photodetecting system pCam6060 with a GSENSE6060BSI CMOS detector, developed at SAO RAS and optimized for photometric methods. https://arxiv.org/abs/2412.10109

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Radial Pulsations in Polaris: A Secondary Science Application of Cherenkov Telescopes via Intensity Interferometry

Ground-based Cherenkov telescopes, which are typically inoperative during moonlit nights for gamma-ray observations, offer a valuable opportunity during this time for secondary scientific applications through Intensity Interferometry (II). Recent developments and observations suggest that implementing II instrumentation on existing and planned Imaging Atmospheric Cherenkov Telescopes (IACTs) can significantly advance optical stellar measurements. Motivated by the resurgence of II efforts over the past two decades, this work presents simulations demonstrating the estimation of stellar parameters for a radially pulsating star, such as Polaris, using either a single telescope or multiple telescopes. For single-telescope simulations, we assume that the photon pixels in the camera are mapped onto four distinct regions of the aperture, generating multiple baselines and enabling enhanced observational plane coverage. These results highlight the potential of Cherenkov telescopes in India for high-resolution optical astronomy during otherwise inoperative periods and offer promising insights into the characterization of bright stellar objects with unprecedented precision.

astro-ph.IM↗
arXiv2026

Parallel adaptive reweighting importance sampling for Bayesian astrophysics

Efficient sampling from high-dimensional, multi-modal posteriors is a central challenge in Bayesian inference across the physical sciences. Gravitational-wave (GW) astronomy, where likelihood evaluations are computationally expensive and posteriors are complex, is one application motivating this work. Popular families of methods like Markov-chain Monte Carlo, nested sampling, and importance sampling all rely on proposal distributions to guide exploration. Because prior knowledge of the target is often limited, practitioners can adopt adaptive proposals that iteratively refine themselves using information gained from previously drawn samples. Traditional adaptive strategies, however, struggle in high-dimensional multi-modal settings: complex, non-linear correlations are hard to capture, and hyperparameters typically require tedious, problem-specific tuning. To address these issues, we introduce Parallel Adaptive Reweighting Importance Sampling (PARIS; descriptively, ``seed sampling''). PARIS models its proposal as a Gaussian mixture whose component centers are the existing samples and whose component weights match the current importance weights. New draws from the proposal therefore concentrate around high-weight regions, while candidate points in unexplored areas receive intentionally inflated weights. As the algorithm continuously reweights all samples up to the latest proposal, any initial over-weighting self-corrects once additional neighbor samples are collected. To enable rapid reweighting, we present an efficient update scheme and evaluate PARIS on illustrative toy problems and more realistic gravitational-wave parameter estimation tasks. PARIS achieves accurate posterior reconstruction and evidence estimation with substantially fewer function evaluations than competing approaches, highlighting its promise for widespread use in astrophysical data analysis.

astro-ph.IM↗
arXiv2026

Ising noise filter: physics-informed filtering for particle detectors

We present the Ising noise filter, a highly portable, graph-based pre-filtering algorithm for early-stage background suppression in particle accelerators and astrophysical detectors. Standard noise rejection methods relying on track fitting suffer from severe combinatorial explosion. Our method bypasses this by mapping individual detector hits to a network of binary spins and minimizing an energy functional. The interaction kernels are physics-informed, tailored to the underlying physics and geometry of the experiment. We demonstrate the efficacy of this approach in two distinct experimental regimes. Applied to the Baikal-GVD neutrino telescope the filter yields fast, standard-quality noise rejection with 96.8% recall for astrophysical neutrinos. For the SPD detector at the NICA collider the filter attains recall of 97% on a toy Monte Carlo sample. Furthermore, when combined with a Peterson--Hopfield network for track finding, our physics-informed coupling improves the TrackML score from 0.5 to 0.95.

astro-ph.IM↗