SPARC4 control system

Denis Bernardes; Orlando Verducci Junior; Francisco Rodrigues; Claudia Vilega Rodrigues; Luciano Fraga; Eder Martioli; Clemens D. Gneiding; André Luiz de Moura Alves; Juliano Romão; Laerte Andrade; Leandro de Almeida; Ana Carolina Mattiuci; Flavio Felipe Ribeiro; Wagner Schlindwein; Jesulino Bispo dos Santos; Francisco Jose Jablonski; Julio Cesar Neves Campagnolo; Rene Laporte

arXiv · 2412.18410

SPARC4 control system

Denis Bernardes·Orlando Verducci Junior·Francisco Rodrigues·Claudia Vilega Rodrigues·Luciano Fraga·Eder Martioli·Clemens D. Gneiding·André Luiz de Moura Alves·Juliano Romão·Laerte Andrade·Leandro de Almeida·Ana Carolina Mattiuci·Flavio Felipe Ribeiro·Wagner Schlindwein·Jesulino Bispo dos Santos·Francisco Jose Jablonski·Julio Cesar Neves Campagnolo·Rene Laporte

View original source ↗Read source document ↗Export metadata ↓

Abstract

SPARC4 is a new astronomical instrument developed entirely by Brazilian institutions, currently installed on the 1.6-m Perkin-Elmer telescope of the Pico dos Dias Observatory. It allows the user to perform photometric or polarimetric observations simultaneously in the four SDSS bands (g, r, i, and z). In this paper, we describe the control system developed for SPARC4. This system is composed of S4ACS, S4ICS, and S4GUI softwares and associated hardware. S4ACS is responsible for controlling the four EMCCD scientific cameras (one for each instrument band). S4ICS controls the sensors and motors responsible for the moving parts of SPARC4. Finally, S4GUI is the interface used to perform observations, which includes the choice of instrument configuration and image acquisition parameters. S4GUI communicates with the instrument subsystems and with some observatory facilities, needed during the observations. Bench tests were performed for the determination of the overheads added by SPARC4 control system in the acquisition of photometric and polarimetric series of images. In the photometric mode, SPARC4 allows the acquisition of a series of 1400 full-frame images, with a deadtime of 4.5 ms between images. Besides, several image series can be concatenated with a deadtime of 450 ms plus the readout time of the last image. For the polarimetric mode, measurements can be obtained with a deadtime of 1.41 s plus the image readout time between subsequent waveplate positions. For both photometric and polarimetric modes, the user can choose among operating modes with image readout times between 5.9 ms and 1.24 s, which ultimately defines the instrument temporal performance.

Explore related subjects

astro-ph.IM

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Denis Bernardes, Orlando Verducci Junior, Francisco Rodrigues, Claudia Vilega Rodrigues, Luciano Fraga, Eder Martioli, Clemens D. Gneiding, André Luiz de Moura Alves, Juliano Romão, Laerte Andrade, Leandro de Almeida, Ana Carolina Mattiuci, Flavio Felipe Ribeiro, Wagner Schlindwein, Jesulino Bispo dos Santos, Francisco Jose Jablonski, Julio Cesar Neves Campagnolo, Rene Laporte. 2024-12-24. SPARC4 control system. https://arxiv.org/abs/2412.18410

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Performance characterization of a new Structural and Thermal Architecture for a future spaceborne Closed-Cycle Dilution Refrigerator

A Structural and Thermal Model (STM) has been developed to support the new spaceborne Closed-Cycle Dilution Refrigerator (CCDR), which aims to provide continuous cooling at 100~mK for long-duration astrophysical missions. The STM is based on a hexapod architecture that ensures both thermal decoupling and mechanical robustness during launch. In this paper, we present the characterization of its thermal and mechanical performances. A dedicated experimental setup was used to investigate the thermal behavior of the STM across a broad temperature range. The study reveals limitations of the collar design, with incomplete power interception from thermal boundary resistances and vibration test failure traced to defective strut gluing. These results guide the next STM iteration with optimized collar and strut assembly for reliable CCDR operation in space.

astro-ph.IM↗

arXiv2026

The Simons Observatory: Development of a Pipeline to Detect Rapid Transients in Time-Ordered Data

We introduce a method for detecting astrophysical transients evolving on timescales of milliseconds to minutes using cosmic microwave background (CMB) survey telescopes. While previous transient searches in CMB data operate in map space, our pipeline directly processes the raw time-ordered data, enabling sensitivity to fast, dynamic signals. We integrate our detection approach into the Simons Observatory time-domain pipeline and assess the performance by injecting symmetric, stellar flare-like light curves into simulated observations. For events flaring with a timescale of 0.5 s, the pipeline detects $\gtrsim90$ % of events at flux densities of 800, 1150, 1650, and 4250\,mJy when measured in the 93, 145, 225, and 280 GHz bands respectively. At a fixed peak flux density, the pipeline more readily detects longer flares. The limiting flux density for 90 % completeness is four times lower for a $\ge5$ s flare than for a 0.5 s flare, while the flux density limits for $\gtrsim50$ % detection efficiency are comparable to the rms noise of the time-ordered data. We are able to determine the position of detected events in each observing band, with a positional uncertainty at the detection threshold comparable to the telescope resolution at that band. These results demonstrate the readiness of this pipeline for incorporation into upcoming Simons Observatory data analyses.

astro-ph.IM↗

arXiv2026

Thermal conductivity of various CFRPs from 100 mK to 20 K

Carbon-fiber-reinforced polymers (CFRPs) are some of the most useful materials for building spacecraft and aerospace tools. They are especially valuable for systems that work at extremely cold (cryogenic) temperatures because they are strong, lightweight, and don't transfer heat easily. In this study, researchers measured how well heat moves through several different types of carbon fiber samples, specifically T300, T700, HS40, M55J, and IMA, at different fiber layouts and densities. These measurements were taken at ultra-cold temperatures ranging from 100 mK to 20 K. The team used a newly developed analysis method to calculate the thermal conductivity for each sample. Finally, they shared how each material behaved at different temperatures and compared their findings to previous research.

astro-ph.IM↗