Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2501.01742

Multifluid tensorial equations for the flow of semi-dilute monodisperse suspensions

Dalton J. E. Harvie
View original source ↗Read source document ↗Export metadata ↓

Abstract

Using the volume averaging technique of Jackson (1997), we derive a set of two-fluid equations that describe the dynamics of a mono-disperse non-Brownian colloidal suspension in the semi-dilute regime. The equations are tensorial and can be applied in arbitrary geometries. Closure models are developed that represent the stress surrounding each particle as a sum of stresses due to fluid movement through a fixed bed of particles, and those due to interactions between particles. Emphasising pragmatism, the developed closure models are consistent with current knowledge of particle interactions in these systems but employ parameters that can be tuned to represent the microstructure of specific particle suspensions. Within the interaction model, a model for the particle distribution around each particle is used that depends on the strain rate field, allowing anisotropy of the microstructure (and hence normal suspension stresses) to develop within the suspension in response to arbitrary strain fields. Force moments acting on particles during particle interactions are calculating by summing hydrodynamic contributions between particle pairs, but adjusted to recognise that multi-particle interactions can increase the effective stress generated during each interaction. Finally, an order of magnitude analysis is performed on the derived momentum equations to determine what terms are significant, leaving only terms in the final equations that are required to predict behaviour during laminar flow within the targeted semi-dilute regime. In a companion paper (referred to as paper II, Noori et. al., 2024) we chose sets of microstructure parameters that predict experimentally measured bulk suspension behaviour, creating a link between particle properties (i.e. roughness), suspension microstructure and shear-induced particle migration in arbitrary flow fields.

Explore related subjects

physics.flu-dyn

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Dalton J. E. Harvie. 2025-01-03. Multifluid tensorial equations for the flow of semi-dilute monodisperse suspensions. https://arxiv.org/abs/2501.01742

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Kolmogorov scale in turbulence of surface gravity waves

In this paper, we study the analogue of the Kolmogorov scale in surface gravity wave turbulence, characterized by the cutoff wavenumber $k_c$ at which the power-law inertial range transitions into the dissipation range. We perform numerical simulations of the primitive dynamical equations with a broad-scale dissipation of magnitude $γ_0 k^2$ in spectral space to establish the relation between $k_c$ and $γ_0$. Our results show a scaling $k_c\simγ_0^β$, where $β$ depends on the slope $α$ of the power-law spectrum. We find that $β(α)$ agrees more closely with the prediction obtained by balancing the nonlinear and dissipation terms in the dynamical equations than with that based on the kinetic equation. This observation reveals that non-resonant triad interactions play a more significant role than resonant quartet interactions in the formation of $k_c$.

physics.flu-dyn↗
arXiv2026

Structural identifiability and stress reconstruction from incomplete optical maps with velocimetry

Reconstructing the stress field of a planar viscoelastic flow from optical measurements loses its direct evidence wherever optical coverage is interrupted, and no improvement in optical precision restores an observation that was never made. We characterize what a second, velocity channel adds, and what neither channel can supply. Two calibrated optical components determine the local deviatoric stress pointwise, while velocity constrains spatial stress variation through momentum balance, so the two channels are complementary rather than redundant. The isotropic part of the stress is unobservable to both: the divergence of an isotropic field is a pure gradient, which the Leray projection annihilates, so every representable isotropic mode lies in the joint null space. That accounts for the null space exactly when the optical field is complete, and bounds it from below otherwise, since finite incomplete sampling and aperture zeros can remove further directions. We verify the count directly on three discretizations. In paired synthetic tests with finite measurement apertures, spatially correlated noise and optical stripe dropout, adding velocity reduces the mean whole-domain deviatoric error from 50.40% to 27.82% at 3% reference noise, and the improvement survives shared gaps, inverse-grid refinement at fixed physical sampling, and a constitutively generated stress field. The improvement does not rest on how the regularization parameter is chosen: it holds under both the expected-norm discrepancy rule and generalized cross-validation, and we report each selection with its position in the search interval, which is where the two rules differ.

physics.flu-dyn↗
arXiv2026

A unified multirate lattice Boltzmann framework for thermosolutal dendritic solidification

Thermosolutal dendritic solidification involves interface evolution, solute diffusion, heat transfer, and melt flow over markedly different time scales. In lattice Boltzmann simulations, a single numerical time interval may place different transport processes in unfavorable relaxation ranges, while asynchronous updates require consistent transfer of phase-change contributions. To address these issues, a unified multirate multiple-relaxation-time lattice Boltzmann method is developed for thermal, solutal, and thermosolutal dendritic solidification. The coupled fields share a common moment-space framework but evolve at different update rates. The concentration and temperature source terms are separated into transport-related and phase-change contributions, and each resolved phase increment is used to immediately transfer the corresponding solutal and latent-heat contributions. The method reproduces characteristic dendritic morphologies and tip-velocity trends under pure diffusion and forced convection, with weak sensitivity to the tested update factors. Directional solidification over Lewis numbers \(Le=1\)--\(1000\) captures the transition from nearly planar to cellular and strongly branched growth, including vertically aligned dendrites and solute-rich interdendritic channels for saline water, in qualitative agreement with experiments. Source-coupling ablation shows that delayed coarse-step transfer produces increasingly strong local source pulses and eventual loss of numerical stability as time-scale separation increases, whereas phase-step instantaneous transfer remains stable over the tested conditions. These results demonstrate the applicability of the proposed framework to dendritic solidification with strongly separated transport time scales. The source code is publicly available in the \emph{DendriteLBM} repository.

physics.flu-dyn↗