Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2501.10198

Time-Resolved Measurements of Cumulative Effects in Gas Dynamics Induced by High-Repetition-Rate Femtosecond Laser Filamentation

Robin Löscher·Malte C. Schroeder·Alan Omar·Clara J. Saraceno
View original source ↗Read source document ↗Export metadata ↓

Abstract

The advent of high-average-power, ultrafast ytterbium-based lasers allows us to generate laser filaments at repetition rates ranging from 10s of kHz up to 100s of kHz. At such high repetition rates, the inter-pulse time lies below the time required for the total diffusion of the deposited heat by each laser pulse, leading to cumulative hydrodynamic effects that have so far been rarely studied. Here, we present, to the best of our knowledge, the first experimental time-resolved measurements of these dynamics in air for laser repetition rates between 1 kHz and 100 kHz. We measure the change in the air refractive index caused by the localized heat deposition and the length of the filament-generated plasma channel, with which we can infer the corresponding change in air density. We observe that at repetition rates above 10 kHz, stationary density depletions with vanishing dynamics emerge. Our findings are of wide relevance for the fields of high-repetition-rate laser filamentation and its applications, as well as THz generation from laser-induced plasma sources.

Explore related subjects

physics.opticsphysics.app-phphysics.plasm-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Robin Löscher, Malte C. Schroeder, Alan Omar, Clara J. Saraceno. 2025-01-17. Time-Resolved Measurements of Cumulative Effects in Gas Dynamics Induced by High-Repetition-Rate Femtosecond Laser Filamentation. https://doi.org/10.1063/5.0258907

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Rubidium referenced Kerr comb with cavity phase matching

Phase matching is a fundamental problem in nonlinear optics that is normally constrained by material dispersion. The limited operation wavelengths within phase matching window limits the application, including the precise metrology using Kerr combs. Demanding applications like compact optical clock and astronomical spectroscopy requires atomic reference around 800 nm, where the natural phase matching is challenging. Here we revisit the concept of cavity phase matching (CPM), and fully reveal its advantage to engineer artificial phase matching beyond material dispersion. With the access of CPM condition in a monolithic high-Q fiber Fabry-Pérot resonator featuring a macroscopic cavity length, we achieve low noise Kerr comb generation around 800 nm, within the power budget of a single-mode laser diode. Inside a pump-integrated package of 19 cm3, low phase noise of -125 dBc/Hz at 100 kHz offset frequency is achieved for a 10.1 GHz repetition rate. Most importantly, the generated Kerr comb has been directly referenced to rubidium atomic transition for long-term stable operation. This result not only opens a new way for Kerr comb generation at arbitrary wavelengths, but also can be generalized to any other nonlinear optical frequency conversion application.

physics.optics↗
arXiv2026

Mid-infrared reconfiguration of population flow in lanthanide nanocrystals

Converting mid-infrared (MIR) radiation to visible or near-infrared wavelengths is essential for imaging and sensing, yet achieving sensitive, low-power, and scalable detection remains challenging. Lanthanide nanocrystals provide an alternative through ratiometric luminescence but are typically constrained by Boltzmann statistics, which tie population distributions to lattice temperature and limit signal contrast. Here we show that MIR irradiation rebalances dissipative relaxation pathways, driving lanthanide emitters into a non-Boltzmann steady state that enables non-thermal control of population distributions. This allows emission behaviors inaccessible under thermal equilibrium. We exploit this regime to achieve linear MIR detection with respect to MIR power across 6.8 to 8.6 micrometers. The ratiometric response is intrinsically independent of the pump power, enabling operation at an ultralow excitation power of 10 uW, several orders of magnitude lower than conventional approaches. Using standard silicon photodetectors, we then demonstrate room-temperature MIR imaging with detection limits approaching 4 nW um-2. Our results establish lanthanide nanoparticles as an efficient platform for MIR conversion and sensing in nanophotonic systems.

physics.optics↗
arXiv2026

Intracavity THz generation using a thin lithium niobate plate in a compact Kerr-lens mode-locked Yb:CALGO bulk oscillator

We demonstrate intracavity terahertz (THz) generation via optical rectification in a 50-m-thick lithium niobate crystal placed inside a compact diode-pumped Kerr-lens mode-locked (KLM) Yb:CALGO bulk oscillator. The oscillator operates at a repetition rate of 85 MHz and delivers 83-fs pulses with up to 71 W of average intracavity power, obtained with only 21.4 W of low-cost multimode diode pump power. We generate single-cycle THz pulses with a spectrum extending up to 3 THz, detected by electro-optic sampling with 60 dB dynamic range within 156 s of measurement time (313 averaged traces) and up to 120 W of THz average power. This work combines the high damage threshold, power-handling capability, and cost-effectiveness of thin LN plates with simplicity, compactness, and low-cost multimode diode-pumped solid-state bulk lasers, offering an attractive alternative for high-repetition-rate THz time-domain spectroscopy systems.

physics.optics↗