Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2502.03416

Performance Analysis of 5G FR2 (mmWave) Downlink 256QAM on Commercial 5G Networks

Kasidis Arunruangsirilert·Pasapong Wongprasert·Jiro Katto
View original source ↗Read source document ↗Export metadata ↓

Abstract

The 5G New Radio (NR) standard introduces new frequency bands allocated in Frequency Range 2 (FR2) to support enhanced Mobile Broadband (eMBB) in congested environments and enables new use cases such as Ultra-Reliable Low Latency Communication (URLLC). The 3GPP introduced 256QAM support for FR2 frequency bands to further enhance downlink capacity. However, sustaining 256QAM on FR2 in practical environments is challenging due to strong path loss and susceptibility to distortion. While 256QAM can improve theoretical throughput by 33%, compared to 64QAM, and is widely adopted in FR1, its real-world impact when utilized in FR2 is questionable, given the significant path loss and distortions experienced in the FR2 range. Additionally, using higher modulation correlates to higher BLER, increased instability, and retransmission. Moreover, 256QAM also utilizes a different MCS table defining the modulation and code rate at different Channel Quality Indexes (CQI), affecting the UE's link adaptation behavior. This paper investigates the real-world performance of 256QAM utilization on FR2 bands in two countries, across three RAN manufacturers, and in both NSA (EN-DC) and SA (NR-DC) configurations, under various scenarios, including open-air plazas, city centers, footbridges, train station platforms, and stationary environments. The results show that 256QAM provides a reasonable throughput gain when stationary but marginal improvements when there is UE mobility while increasing the probability of NACK responses, increasing BLER, and the number of retransmissions. Finally, MATLAB simulations are run to validate the findings as well as explore the effect of the recently introduced 1024QAM on FR2.

Explore related subjects

cs.NIeess.SP

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kasidis Arunruangsirilert, Pasapong Wongprasert, Jiro Katto. 2025-11-20. Performance Analysis of 5G FR2 (mmWave) Downlink 256QAM on Commercial 5G Networks. https://doi.org/10.1109/icc52391.2025.11161113

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Semord: Learned Semantic-Preserving Placement and Low-Fanout Routing for Distributed Vector Search

Vector databases are increasingly deployed in distributed settings where different users, sites, or domains maintain vector data. Existing vector databases rely on a coordinator to record which shards store which parts of the vector space and to route each query to those shards. In a decentralized setting, peers may join, leave, or move data without a trusted node tracking every change, and outdated routing information can therefore send queries to the wrong peers or require contacting many peers, reducing vector retrieval recall and increasing network latency. We present Semord, a decentralized vector search overlay system that achieves high recall by routing each ANN query to a small set of relevant peers, without relying on a centralized coordinator. Semord addresses this problem by making semantic locality routable: 1) We propose VHash to place semantically related vectors near each other in the overlay key space while avoiding load imbalance, so that each query only needs to contact a small neighborhood of peers for distributed local ANN ranking. 2) We design VecDHT, a communication protocol that maintains decentralized routing, region metadata, churn resilience, and VHash updates under membership and workload changes. Our extensive experiments on a real testbed show that Semord improves recall by more than 15% and reduces contacted peers by over 60% compared with decentralized baselines. Semord also approaches the recall and latency of a centralized oracle baseline while reducing peak peer-local ANN index memory by more than 2X. Controlled large-scale simulations further show that Semord scales across real-world embedding workloads and remains robust under churn for scoped vector retrieval as a decentralized overlay.

cs.NI↗
arXiv2026

Lizard: Bandwidth-Adaptive Real-Time Video Analytics through Content-Aware Packet Discarding at Last-Mile Edge Routers

The timeliness and accuracy of edge-based video analytics can be hindered by drastic reductions in available bandwidth (ABW) at last-mile edge routers, causing prolonged queuing delays. This work proposes Lizard, a system that leverages video-content-aware packet discarding to mitigate the negative effects of drastic ABW degradation that may frequently occur at a last-mile edge router by judiciously discarding packets that contain frame blocks less important to the analytics at the destination. To achieve this, we first devise a frame-block-aware RTP header extension to effectively decouple packet dependencies to encode frame blocks. Second, Lizard uses a priority-based feedback mechanism that dynamically evaluates packet priorities based on relative accuracy impacts. Third, we develop an adaptive phase-transition-based packet discarding strategy at the router to discard packets that represent unimportant blocks. Our evaluation of Lizard shows improvements over existing methods are substantial: 53.2% reduction in latency and 27.1% increase in analysis accuracy.

cs.NI↗
arXiv2026

Flux: Optimal Scheduling of Optical Circuit Switches for LLM Training

Optical Circuit Switching (OCS) offers high bandwidth density and energy efficiency for LLM training, but incurs a non-negligible reconfiguration delay. Prior work typically schedules optical circuit switches independently of compute, using aggregate traffic demand to determine which circuits to provision and when. We argue that this separation creates a fundamental inefficiency: reconfigurations that ignore the compute timeline can stall communication, resulting in low circuit utilization and large buffer requirements. In this paper, we present Flux, a scheduler that optimally schedules optical circuit switches based on the structure of the entire workload. Flux remains effective across a wide range of switching speeds by reusing circuits and amortizing reconfiguration delay behind compute and communication. We show that Flux reduces training iteration time by up to $10\times$ and peak NIC buffer requirements by more than three orders of magnitude compared to traditional periodic schedulers.

cs.NI↗