Internal Aerodynamics of Supersonic Crossflows with Transverse Liquid Injection

Srinivas M V V; Arun Kumar Rajagopal; Lebonah B; Jegesh David M

Home/Archive/arXiv

arXiv · 2502.09295

Internal Aerodynamics of Supersonic Crossflows with Transverse Liquid Injection

Srinivas M V V·Arun Kumar Rajagopal·Lebonah B·Jegesh David M

View original source ↗Read source document ↗Export metadata ↓

Abstract

This study experimentally investigates the internal aerodynamics of transverse liquid injection in a supersonic crossflow (Mach (M) = 2.1) using two configurations: single and tandem (8 mm spacing) at three injection mass flow rates. Back-lit imaging revealed classical jet breakup phenomena, including surface wave instabilities with increasing amplitudes along the jet boundary, leading to protrusions, breakup into large liquid clumps, and their disintegration into finer droplets under aerodynamic forces. The single injection exhibited the formation of large liquid clumps further downstream compared to the tandem injection. Schlieren imaging showed that at a low momentum flux ratio (J = 0.94), both configurations produced regular reflection (RR) of the bow shock wave from the top wall. Increasing J to 1.90 resulted in RR for the single injection, while the tandem injection transitioned to Mach reflection (MR). At J = 2.67, both configurations exhibited MR. The earlier RR-to MR transition in tandem injection is attributed to its higher jet penetration and spanwise spread, which reduce the downstream crossflow passage area, acting as a supersonic diffuser and increasing downstream pressure which is favorable for MR transition. Separation zones were observed at the bottom wall due to bow shock wave-boundary layer interaction, and at the side walls due to the interaction of the Mach stem of the MR structure with the walls. These interactions create complex flow regions dominated by vortex structures, significantly influencing the overall flow dynamics.

Explore related subjects

physics.flu-dyn

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Srinivas M V V, Arun Kumar Rajagopal, Lebonah B, Jegesh David M. 2025-02-13. Internal Aerodynamics of Supersonic Crossflows with Transverse Liquid Injection. https://arxiv.org/abs/2502.09295

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Cross-helicity and chaotic dynamics of full-disc solar magnetic field

Using the results of laboratory experiments and direct numerical simulations, as well as observations of the full-disc solar magnetic field and sunspot number dynamics, it is demonstrated that cross-helicity can dominate the decaying part of the frequency power spectra of the magnetic field generated by a magnetohydrodynamic (MHD) dynamo in chaotic/turbulent swirling flows for sufficiently strong MHD turbulence (including the solar dynamo). The theoretical consideration is based on a Kolmogorov-like phenomenology within the framework of the distributed chaos concept. It is also shown that the solar full-disc magnetic field for the last two solar cycles with weak magnetic activity exhibits deterministic chaotic behavior concentrated around the equator.

physics.flu-dyn↗

arXiv2026

Manifestation of spurious currents and interface regularization in wind turbulence over fast-propagating waves

Accurate simulation of wind turbulence over fast-propagating waves requires interface-capturing methods that suppress numerical artifacts while accurately resolving momentum transfer across the interface. In high wave-age regimes, numerical errors at the air-water interface can reach magnitudes comparable to the physical flow, directly affecting predicted turbulence statistics. This study examines widely used interface-capturing techniques to evaluate how curvature estimation and flux discretization influence wind-wave simulations through the resulting spurious currents and interface regularization. A systematic assessment is performed using static and translating droplet benchmarks, together with solitary and monochromatic wave cases, to identify and quantify the dominant numerical error mechanisms. In addition, comparison with experimental measurements reveals how these primary error sources manifest in coupled wind-wave simulations. These findings clarify the numerical origin of the observed discrepancies and underscore the importance of accurate curvature and flux treatment in high wave-age regimes, without which numerical artifacts risk being misattributed to genuine wind-wave physics.

physics.flu-dyn↗

arXiv2026

A reconfigurable multi-axis cyber-physical framework for multi-regime fluid--structure interaction experiments

Fluid--structure interaction (FSI) experiments are typically built around mechanical dynamics and constraints imposed by the physical apparatus, so changing mass, stiffness, damping, or allowable motion often requires hardware reconfiguration. Here we present a reconfigurable cyber-physical framework in which these properties are instead assigned through software-defined dynamics. The system provides three translational and one rotational degree of freedom, each independently configurable as prescribed, load-responsive, or locked, with operating roles that can also be reassigned during a running experiment. Measured forces and torques are incorporated into real-time virtual dynamic models, while a common supervisory architecture coordinates multi-axis motion, mode switching, synchronized data acquisition, and diagnostic positioning. The prescribed-motion pathway is validated using a pitching hydrofoil by comparison with published thrust and power scaling trends, while the load-responsive pathway is evaluated using an active-heave/passive-pitch benchmark that reproduces the expected frequency-dependent resonant response over the tested conditions. The same platform is then reconfigured for intra-cycle active--passive pitching, coordinated vertical-axis turbine-surrogate motion, force-driven passive surge, and automated multilayer stereoscopic particle image velocimetry. These results demonstrate that distinct FSI boundary conditions and measurement requirements can be implemented within a common motion, sensing, and control architecture. By treating mechanical roles and constraints as software-defined experimental variables, the framework provides a reusable basis for reconfigurable FSI experiments without redesigning the underlying platform for each application.

physics.flu-dyn↗