Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2502.10800

Coupled hydro-aero-turbo dynamics of liquid-tank system for wave energy harvesting: Numerical modellings and scaled prototype tests

Chongwei Zhang·Xunhao Zhu·Cheng Zhang·Luofeng Huang·Dezhi Ning
View original source ↗Read source document ↗Export metadata ↓

Abstract

An integrated numerical model is proposed for the first time to explore the coupled hydro-aero-turbo dynamics of wave-energy-harvesting (WEH) liquid tanks. A scaled prototype of the WEH liquid tank with an impulse air turbine system is made to experimentally validate the numerical model.Multi-layered impulse air turbine systems (MLATS) are creatively introduced into the liquid-tank system. The inherent mechanisms of the coupled hydro-aero-turbo dynamics of the WEH liquid tank with different turbine properties are systematically investigated.Compared with the experimental data, the numerical model can accurately reproduce the rotor speed, liquid motion, and air pressure of the WEH liquid tank. Upon analysing mechanical parameters of the turbine rotor, it is found that the rotor's moment of inertia mainly affects the rotor speed's variation range, while the damping coefficient significantly influences the averaged rotor speed. The optimal power take-off damping for the WEH liquid tank is identified. Considering the efficiency performances of three MLATSs, improving Turbine-L1 to Turbine-L2 or Turbine-L3 can increase the averaged power output by about 25% or 40%, respectively.Increasing the tank breadth can effectively boost the power output in a nonlinear way.Under the considered excitation conditions, if the tank breadth is doubled, the maximum averaged power output can be increased by around four times. Through a series of failure tests, Turbine-L3 shows greater reliability in extreme conditions compared to a conventional single-rotor turbine. Even if the most important rotor of Turbine-L3 fails to work, the maximum loss of the averaged power output is only 44%. The present WEH liquid with Turbine - L3 shows improved efficiency and reliability compared to the conventional liquid-tank system with a single-rotor turbine.

Explore related subjects

physics.flu-dyn

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Chongwei Zhang, Xunhao Zhu, Cheng Zhang, Luofeng Huang, Dezhi Ning. 2025-02-15. Coupled hydro-aero-turbo dynamics of liquid-tank system for wave energy harvesting: Numerical modellings and scaled prototype tests. https://doi.org/10.1016/j.energy.2025.136690

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Cross-helicity and chaotic dynamics of full-disc solar magnetic field

Using the results of laboratory experiments and direct numerical simulations, as well as observations of the full-disc solar magnetic field and sunspot number dynamics, it is demonstrated that cross-helicity can dominate the decaying part of the frequency power spectra of the magnetic field generated by a magnetohydrodynamic (MHD) dynamo in chaotic/turbulent swirling flows for sufficiently strong MHD turbulence (including the solar dynamo). The theoretical consideration is based on a Kolmogorov-like phenomenology within the framework of the distributed chaos concept. It is also shown that the solar full-disc magnetic field for the last two solar cycles with weak magnetic activity exhibits deterministic chaotic behavior concentrated around the equator.

physics.flu-dyn↗
arXiv2026

Manifestation of spurious currents and interface regularization in wind turbulence over fast-propagating waves

Accurate simulation of wind turbulence over fast-propagating waves requires interface-capturing methods that suppress numerical artifacts while accurately resolving momentum transfer across the interface. In high wave-age regimes, numerical errors at the air-water interface can reach magnitudes comparable to the physical flow, directly affecting predicted turbulence statistics. This study examines widely used interface-capturing techniques to evaluate how curvature estimation and flux discretization influence wind-wave simulations through the resulting spurious currents and interface regularization. A systematic assessment is performed using static and translating droplet benchmarks, together with solitary and monochromatic wave cases, to identify and quantify the dominant numerical error mechanisms. In addition, comparison with experimental measurements reveals how these primary error sources manifest in coupled wind-wave simulations. These findings clarify the numerical origin of the observed discrepancies and underscore the importance of accurate curvature and flux treatment in high wave-age regimes, without which numerical artifacts risk being misattributed to genuine wind-wave physics.

physics.flu-dyn↗
arXiv2026

A reconfigurable multi-axis cyber-physical framework for multi-regime fluid--structure interaction experiments

Fluid--structure interaction (FSI) experiments are typically built around mechanical dynamics and constraints imposed by the physical apparatus, so changing mass, stiffness, damping, or allowable motion often requires hardware reconfiguration. Here we present a reconfigurable cyber-physical framework in which these properties are instead assigned through software-defined dynamics. The system provides three translational and one rotational degree of freedom, each independently configurable as prescribed, load-responsive, or locked, with operating roles that can also be reassigned during a running experiment. Measured forces and torques are incorporated into real-time virtual dynamic models, while a common supervisory architecture coordinates multi-axis motion, mode switching, synchronized data acquisition, and diagnostic positioning. The prescribed-motion pathway is validated using a pitching hydrofoil by comparison with published thrust and power scaling trends, while the load-responsive pathway is evaluated using an active-heave/passive-pitch benchmark that reproduces the expected frequency-dependent resonant response over the tested conditions. The same platform is then reconfigured for intra-cycle active--passive pitching, coordinated vertical-axis turbine-surrogate motion, force-driven passive surge, and automated multilayer stereoscopic particle image velocimetry. These results demonstrate that distinct FSI boundary conditions and measurement requirements can be implemented within a common motion, sensing, and control architecture. By treating mechanical roles and constraints as software-defined experimental variables, the framework provides a reusable basis for reconfigurable FSI experiments without redesigning the underlying platform for each application.

physics.flu-dyn↗