Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2502.11316

Standalone FPGA-Based QAOA Emulator for Weighted-MaxCut on Embedded Devices

Seonghyun Choi·Kyeongwon Lee·Jae-Jin Lee·Woojoo Lee
View original source ↗Read source document ↗Export metadata ↓

Abstract

Quantum computing QC emulation is crucial for advancing QC applications, especially given the scalability constraints of current devices. FPGA-based designs offer an efficient and scalable alternative to traditional large-scale platforms, but most are tightly integrated with high-performance systems, limiting their use in mobile and edge environments. This study introduces a compact, standalone FPGA-based QC emulator designed for embedded systems, leveraging the Quantum Approximate Optimization Algorithm (QAOA) to solve the Weighted-MaxCut problem. By restructuring QAOA operations for hardware compatibility, the proposed design reduces time complexity from O(N^2) to O(N), where N equals 2^n for n qubits. This reduction, coupled with a pipeline architecture, significantly minimizes resource consumption, enabling support for up to nine qubits on mid-tier FPGAs, roughly three times more than comparable designs. Additionally, the emulator achieved energy savings ranging from 1.53 times for two-qubit configurations to up to 852 times for nine-qubit configurations, compared to software-based QAOA on embedded processors. These results highlight the practical scalability and resource efficiency of the proposed design, providing a robust foundation for QC emulation in resource-constrained edge devices.

Explore related subjects

cs.ETquant-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Seonghyun Choi, Kyeongwon Lee, Jae-Jin Lee, Woojoo Lee. 2025-03-27. Standalone FPGA-Based QAOA Emulator for Weighted-MaxCut on Embedded Devices. https://arxiv.org/abs/2502.11316

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Beyond HBM-on-GPU: Thermal Design Envelope for 3D Volumetric DRAM-on-GPU Integration

The scaling of GPUs for AI and HPC workloads is increasingly constrained by the capacity, bandwidth, and thermal limits of both 2.5D HBM-GPU and direct-stacked 3D HBM-on-GPU integration. This work establishes the thermal design envelope for 3D volumetric DRAM-on-GPU integration, in which vertically oriented DRAM dies and interleaved cooling cavities reshape heat flow and memory interfacing above the GPU. Using a package-level thermal model anchored to a consistent HBM-on-GPU baseline and driven by a realistic reticle-scale non-uniform GPU power map, we quantify the key parameters governing thermal feasibility. Stack height is the dominant limiter of peak temperature, while cooling-cavity conductivity shifts the feasible region, and mold insertion and stack orientation further modulate thermal behavior. A distributed memory-controller and network-on-chip tier introduces only a moderate thermal penalty. Although die-level parallelism increases bandwidth, the reduction in simulated training time saturates once execution becomes compute-bound. These results define a bounded co-design space across bandwidth, capacity, and thermal constraints for 3D volumetric DRAM-on-GPU integration.

cs.ET↗
arXiv2026

Droop-Aware Foundation Model Power Flow

This paper develops a droop-aware extension of the GridFM power systems foundation model, embedding droop gains and frequency/voltage deadband parameters as per-bus node features to enable control-aware AC power-flow analysis. Existing power-flow datasets encode only static electrical features, conflating operating points from qualitatively different control regimes; this work resolves that gap by exposing droop and deadband parameters as structured node features, with deadband discontinuities handled through a smooth tanh approximation that preserves solver differentiability. A transformer-based graph neural network is pre-trained on masked reconstruction and fine-tuned on the resulting control-aware datasets. The framework is validated against PSCAD electromagnetic-transient simulations on a two-bus system (0.11% maximum steady-state error) and cross-validated against an independent PyPower droop solver on the IEEE 24-bus RTS. On the 24-bus system the surrogate attains R2 = 0.9996 for active generation and 0.0015 p.u. voltage-magnitude RMSE; scalability is confirmed on the IEEE 300-bus system (0.0036 p.u. RMSE, R2 = 0.9841 for voltage magnitude across 299,700 predictions). A three-mode control study further shows that the deadband widens the control-error distribution while leaving total droop compensation unchanged, establishing deadband width as an actionable node-level design feature.

cs.ET↗
arXiv2026

GNN-based Path-aware multi-view Circuit Learning for Technology Mapping

Traditional technology mapping suffers from systemic inaccuracies in delay estimation due to its reliance on abstract, technology-agnostic delay models that fail to capture the nuanced timing behavior behavior of real post-mapping circuits. To address this fundamental limitation, we introduce GPA(graph neural network (GNN)-based Path-Aware multi-view circuit learning), a novel GNN framework that learns precise, data-driven delay predictions by synergistically fusing three complementary views of circuit structure: And-Inverter Graphs (AIGs)-based functional encoding, post-mapping technology emphasizes critical timing paths. Trained exclusively on real cell delays extracted from critical paths of industrial-grade post-mapping netlists, GPA learns to classify cut delays with unprecedented accuracy, directly informing smarter mapping decisions. Evaluated on the 19 EPFL combinational benchmarks, GPA achieves 19.9%, 2.1% and 4.1% average delay reduction over the conventional heuristics methods (techmap, MCH) and the prior state-of-the-art ML-based approach SLAP, respectively-without compromising area efficiency.

cs.ET↗