Search arXivSearch

arXiv · 2503.06596

Performance Analysis of Multi-IRS Aided Multiple Operator Systems at mmWave Frequencies

Abstract

Intelligent reflecting surfaces (IRSs) are envisioned to enhance the performance of mmWave wireless systems. In practice, multiple mobile operators (MO) coexist in an area and provide simultaneous and independent services to user-equipments (UEs) on different frequency bands. Then, if each MO deploys an IRS to enhance its performance, the IRSs also alter the channels of UEs of other MOs. In this context, this paper addresses the following questions: can an MO still continue to control its IRS independently of other MOs and IRSs? Is joint optimization of IRSs deployed by different MOs and inter-MO cooperation needed? To that end, by considering the mmWave bands, we first derive the ergodic sum spectral efficiency (SE) in a $2$-MO system for the following schemes: 1) joint optimization of an overall phase angle of the IRSs with MO cooperation, 2) MO cooperation via time-sharing, and 3) no cooperation between the MOs. We find that even with no cooperation between the MOs, the performance of a given MO is not degraded by the presence of an out-of-band (OOB) MO deploying and independently controlling its own IRS. On the other hand, the SE gain obtained at a given MO using joint optimization and cooperation over the no-cooperation scheme decreases inversely with the number of elements in the IRS deployed by the other MO. We generalize our results to a multiple MO setup and show that the gain in the sum-SE over the no-cooperation case increases at least linearly with the number of OOB MOs. Finally, we numerically verify our findings and conclude that every MO can independently operate and tune its IRS; cooperation via optimizing an overall phase only brings marginal benefits in practice.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Souradeep Ghosh, L. Yashvanth, Chandra R. Murthy. 2025-07-17. Performance Analysis of Multi-IRS Aided Multiple Operator Systems at mmWave Frequencies. https://doi.org/10.1109/tcomm.2025.3588567

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Multi-Carrier Rydberg Atomic Quantum Receivers with Enhanced Bandwidth Feature for Communication and Sensing

Rydberg atomic quantum receivers (RAQRs) have attracted significant attention in recent years due to their ultra-high sensitivity. Although capable of precisely detecting the amplitude and phase of weak signals, conventional RAQRs face inherent limitations in accurately receiving wideband RF signals, due to the discrete nature of atomic energy levels and their intrinsic instantaneous bandwidth constraints. These limitations hinder their direct application to multi-carrier communication and sensing. To address this issue, this paper proposes a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) structure with five energy levels. We derive the amplitude and phase of the MC-RAQR and extract the baseband electrical signal for signal processing. In terms of multi-carrier communication and sensing, we analyze the channel capacity and accuracy of angle of arrival (AoA) and distance parameters, respectively. Numerical results validate our proposed model, showing that the MC-RAQR can achieve up to a bandwidth of 11.7 MHz, which is 17-fold larger than the conventional RAQRs. As a result, the channel capacity and the resolution for multi-target sensing are improved significantly. Specifically, the channel capacity of MC-RAQR is 110-fold and 2.8-fold larger than the classical RF receivers and RAQRs, respectively. For sensing performance, the RMSE of AoA estimation for MC-RAQR exhibits 7.6-fold reduction, compared with the conventional RAQRs. Furthermore, the RMSE of distance estimation is $634$-fold smaller than that of the root-CRB of classical RF receivers, showing the superior performance of the MC-RAQR. This demonstrates its compatibility with waveforms such as orthogonal frequency-division multiplexing (OFDM) and its significant advantages for multi-carrier signal reception.

eess.SP

Channel Estimation in MIMO Systems Aided by Microwave Linear Analog Computers (MiLACs)

Microwave linear analog computers (MiLACs) have recently emerged as a promising solution for future gigantic multiple-input multiple-output (MIMO) systems, enabling beamforming with greatly reduced hardware and computational cost. However, channel estimation for MiLAC-aided systems remains an open problem. Conventional least squares (LS) and minimum mean square error (MMSE) estimation rely on intensive digital computation, which undermines the computational advantage offered by MiLACs. In this letter, we propose efficient LS and MMSE channel estimation schemes for MiLAC-aided MIMO systems. By designing the training precoder and combiner implemented by lossless and reciprocal MiLACs, the proposed schemes perform LS and MMSE estimation in the analog domain, leaving only simple digital scaling. They achieve identical estimation performance to their digital counterparts while significantly reducing computational complexity. Numerical results verify the effectiveness of the proposed schemes.

eess.SP

Joint Subcarrier Phase Recovery for Nonlinearity Mitigation

We propose a low-complexity phase recovery scheme that simultaneously mitigates laser phase noise and fiber nonlinearity across several subcarriers. In a long single-span link with Raman amplification, the scheme achieves 0.9 dB gain with 99 real multiplications per complex symbol.

eess.SP