Search arXivSearch

arXiv · 2503.21603

All-Optical High-speed Programmable Nonlinear Activation Functions using a Fabry-Perot Laser

Abstract

The threads of photonics are eagerly awaited to redefine the future of neuromorphic data processing, especially as the computing-intensive artificial intelligence models become an unavoidable part of our everyday lives. Still, there is much to be improved within the domain of photonic nonlinear activation functions, as the programmable, all-optical, energy-efficient nonlinearities remain beyond the grasp of today's state of the art. In this paper, we address the issue at hand and propose a novel approach in the realization of high-performing all-optical photonic activations. Through simulations and experiments, we show that Fabry-Perot laser diodes (FP-LDs) exhibit richness and high programmability of their nonlinear response to input optical pulses with widths as low as 25 ps. We demonstrate a variety of sigmoid-like and inverted PReLU-like trends to be used as all-optical activation functions in photonic neural networks, testing their performance in stringent, real-life training scenarios with randomized data patterns at repetition rates up to 10 GHz. The programmability of activations is shown using a multitude of experimental operating parameters, among which we highlight the power variation of an additional continuous wave laser, injected into the FP-LD, enriching our approach with all-optical control of all-optical activations. With very low static power consumption of our active element, we achieve a record-breaking energy draw on the order of pJ to hundreds of fJ per nonlinear operation.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mladen Banović, Petar Atanasijević, Antonios Prapas, Christos Pappas, Jasna Crnjanski, Apostolos Tsakyridis, Miltiadis Moralis-Pegios, Konstantinos Vyrsokinos, Milanka Lović, Nina Zdravković, Milena Mićić, Marko Krstić, Slobodan Petričević, Nikos Pleros, Dejan Gvozdić. 2025-03-27. All-Optical High-speed Programmable Nonlinear Activation Functions using a Fabry-Perot Laser. https://arxiv.org/abs/2503.21603

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Rubidium referenced Kerr comb with cavity phase matching

Phase matching is a fundamental problem in nonlinear optics that is normally constrained by material dispersion. The limited operation wavelengths within phase matching window limits the application, including the precise metrology using Kerr combs. Demanding applications like compact optical clock and astronomical spectroscopy requires atomic reference around 800 nm, where the natural phase matching is challenging. Here we revisit the concept of cavity phase matching (CPM), and fully reveal its advantage to engineer artificial phase matching beyond material dispersion. With the access of CPM condition in a monolithic high-Q fiber Fabry-Pérot resonator featuring a macroscopic cavity length, we achieve low noise Kerr comb generation around 800 nm, within the power budget of a single-mode laser diode. Inside a pump-integrated package of 19 cm3, low phase noise of -125 dBc/Hz at 100 kHz offset frequency is achieved for a 10.1 GHz repetition rate. Most importantly, the generated Kerr comb has been directly referenced to rubidium atomic transition for long-term stable operation. This result not only opens a new way for Kerr comb generation at arbitrary wavelengths, but also can be generalized to any other nonlinear optical frequency conversion application.

physics.optics

Mid-infrared reconfiguration of population flow in lanthanide nanocrystals

Converting mid-infrared (MIR) radiation to visible or near-infrared wavelengths is essential for imaging and sensing, yet achieving sensitive, low-power, and scalable detection remains challenging. Lanthanide nanocrystals provide an alternative through ratiometric luminescence but are typically constrained by Boltzmann statistics, which tie population distributions to lattice temperature and limit signal contrast. Here we show that MIR irradiation rebalances dissipative relaxation pathways, driving lanthanide emitters into a non-Boltzmann steady state that enables non-thermal control of population distributions. This allows emission behaviors inaccessible under thermal equilibrium. We exploit this regime to achieve linear MIR detection with respect to MIR power across 6.8 to 8.6 micrometers. The ratiometric response is intrinsically independent of the pump power, enabling operation at an ultralow excitation power of 10 uW, several orders of magnitude lower than conventional approaches. Using standard silicon photodetectors, we then demonstrate room-temperature MIR imaging with detection limits approaching 4 nW um-2. Our results establish lanthanide nanoparticles as an efficient platform for MIR conversion and sensing in nanophotonic systems.

physics.optics

Intracavity THz generation using a thin lithium niobate plate in a compact Kerr-lens mode-locked Yb:CALGO bulk oscillator

We demonstrate intracavity terahertz (THz) generation via optical rectification in a 50-m-thick lithium niobate crystal placed inside a compact diode-pumped Kerr-lens mode-locked (KLM) Yb:CALGO bulk oscillator. The oscillator operates at a repetition rate of 85 MHz and delivers 83-fs pulses with up to 71 W of average intracavity power, obtained with only 21.4 W of low-cost multimode diode pump power. We generate single-cycle THz pulses with a spectrum extending up to 3 THz, detected by electro-optic sampling with 60 dB dynamic range within 156 s of measurement time (313 averaged traces) and up to 120 W of THz average power. This work combines the high damage threshold, power-handling capability, and cost-effectiveness of thin LN plates with simplicity, compactness, and low-cost multimode diode-pumped solid-state bulk lasers, offering an attractive alternative for high-repetition-rate THz time-domain spectroscopy systems.

physics.optics