Search arXivSearch

arXiv · 2503.22544

3D Heterogeneous Integration of Silicon Nitride and Aluminum Nitride on Sapphire toward Ultra-wideband Photonics Integrated Circuits

Abstract

Extending two-dimensional photonic integrated circuits (PICs) to three-dimensional (3D) configurations promises great potential for scaling up integration, enhancing functionality, and improving performance of PICs. Silicon-based 3D PICs have made substantial progress due to CMOS compatibility. However, the narrow bandgap of silicon (1.1 eV) limits their use in short-wavelength applications, such as chemical and biological sensing, underwater optical communications, and optical atomic clocks. In this work, we developed a 3D photonics platform by heterogeneously integrating silicon nitride (SiN) and aluminum nitride (AlN) PICs on sapphire (Al$_2$O$_3$). The broadband transparency of these materials allow our platform to operate over a multi-octave wavelength ranging from ultraviolet to infrared. Leveraging this platform, we demonstrated efficient optical nonlinearity in an AlN microcavity, low-loss and tunable SiN waveguide-based optical components, and optical linking between AlN and SiN PICs layers in the visible and near-infrared spectrum, hinting at potential applications in integrated quantum systems. Our work presents an ultra-wideband 3D PICs platform, providing new opportunities for broadband and short-wavelength applications of PICs.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Liang Zhang, Yanan Guo, Junxi Wang, Jinmin Li, Jianchang Yan. 2025-04-02. 3D Heterogeneous Integration of Silicon Nitride and Aluminum Nitride on Sapphire toward Ultra-wideband Photonics Integrated Circuits. https://arxiv.org/abs/2503.22544

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Rubidium referenced Kerr comb with cavity phase matching

Phase matching is a fundamental problem in nonlinear optics that is normally constrained by material dispersion. The limited operation wavelengths within phase matching window limits the application, including the precise metrology using Kerr combs. Demanding applications like compact optical clock and astronomical spectroscopy requires atomic reference around 800 nm, where the natural phase matching is challenging. Here we revisit the concept of cavity phase matching (CPM), and fully reveal its advantage to engineer artificial phase matching beyond material dispersion. With the access of CPM condition in a monolithic high-Q fiber Fabry-Pérot resonator featuring a macroscopic cavity length, we achieve low noise Kerr comb generation around 800 nm, within the power budget of a single-mode laser diode. Inside a pump-integrated package of 19 cm3, low phase noise of -125 dBc/Hz at 100 kHz offset frequency is achieved for a 10.1 GHz repetition rate. Most importantly, the generated Kerr comb has been directly referenced to rubidium atomic transition for long-term stable operation. This result not only opens a new way for Kerr comb generation at arbitrary wavelengths, but also can be generalized to any other nonlinear optical frequency conversion application.

physics.optics

Mid-infrared reconfiguration of population flow in lanthanide nanocrystals

Converting mid-infrared (MIR) radiation to visible or near-infrared wavelengths is essential for imaging and sensing, yet achieving sensitive, low-power, and scalable detection remains challenging. Lanthanide nanocrystals provide an alternative through ratiometric luminescence but are typically constrained by Boltzmann statistics, which tie population distributions to lattice temperature and limit signal contrast. Here we show that MIR irradiation rebalances dissipative relaxation pathways, driving lanthanide emitters into a non-Boltzmann steady state that enables non-thermal control of population distributions. This allows emission behaviors inaccessible under thermal equilibrium. We exploit this regime to achieve linear MIR detection with respect to MIR power across 6.8 to 8.6 micrometers. The ratiometric response is intrinsically independent of the pump power, enabling operation at an ultralow excitation power of 10 uW, several orders of magnitude lower than conventional approaches. Using standard silicon photodetectors, we then demonstrate room-temperature MIR imaging with detection limits approaching 4 nW um-2. Our results establish lanthanide nanoparticles as an efficient platform for MIR conversion and sensing in nanophotonic systems.

physics.optics

Intracavity THz generation using a thin lithium niobate plate in a compact Kerr-lens mode-locked Yb:CALGO bulk oscillator

We demonstrate intracavity terahertz (THz) generation via optical rectification in a 50-m-thick lithium niobate crystal placed inside a compact diode-pumped Kerr-lens mode-locked (KLM) Yb:CALGO bulk oscillator. The oscillator operates at a repetition rate of 85 MHz and delivers 83-fs pulses with up to 71 W of average intracavity power, obtained with only 21.4 W of low-cost multimode diode pump power. We generate single-cycle THz pulses with a spectrum extending up to 3 THz, detected by electro-optic sampling with 60 dB dynamic range within 156 s of measurement time (313 averaged traces) and up to 120 W of THz average power. This work combines the high damage threshold, power-handling capability, and cost-effectiveness of thin LN plates with simplicity, compactness, and low-cost multimode diode-pumped solid-state bulk lasers, offering an attractive alternative for high-repetition-rate THz time-domain spectroscopy systems.

physics.optics