Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2504.02162

Toward a Sustainable Low-Altitude Economy: A Survey of Energy-Efficient RIS-UAV Networks

Manzoor Ahmed·Aized Amin Soofi·Feroz Khan·Salman Raza·Wali Ullah Khan·Lina Su·Fang Xu·Zhu Han
View original source ↗Read source document ↗Export metadata ↓

Abstract

The integration of RIS into UAV networks presents a transformative solution for achieving energy-efficient and reliable communication, particularly within the rapidly expanding low-altitude economy (LAE). As UAVs facilitate diverse aerial services-spanning logistics to smart surveillance-their limited energy reserves create significant challenges. RIS effectively addresses this issue by dynamically shaping the wireless environment to enhance signal quality, reduce power consumption, and extend UAV operation time, thus enabling sustainable and scalable deployment across various LAE applications. This survey provides a comprehensive review of RIS-assisted UAV networks, focusing on energy-efficient design within LAE applications. We begin by introducing the fundamentals of RIS, covering its operational modes, deployment architectures, and roles in both terrestrial and aerial environments. Next, advanced EE-driven strategies for integrating RIS and UAVs. Techniques such as trajectory optimization, power control, beamforming, and dynamic resource management are examined. Emphasis is placed on collaborative solutions that incorporate UAV-mounted RIS, wireless energy harvesting (EH), and intelligent scheduling frameworks. We further categorize RIS-enabled schemes based on key performance objectives relevant to LAE scenarios. These objectives include sum rate maximization, coverage extension, QoS guarantees, secrecy rate improvement, latency reduction, and age of information (AoI) minimization. The survey also delves into RIS-UAV synergy with emerging technologies like MEC, NOMA, V2X communication, and WPT. These technologies are crucial to the LAE ecosystem. Finally, we outline open research challenges and future directions, emphasizing the critical role of energy-aware, RIS-enhanced UAV networks in shaping scalable, sustainable, and intelligent infrastructures within the LAE.

Explore related subjects

cs.ETcs.NI

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Manzoor Ahmed, Aized Amin Soofi, Feroz Khan, Salman Raza, Wali Ullah Khan, Lina Su, Fang Xu, Zhu Han. 2025-09-15. Toward a Sustainable Low-Altitude Economy: A Survey of Energy-Efficient RIS-UAV Networks. https://arxiv.org/abs/2504.02162

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Whole-Blood Boundary Analysis of BioFET-Based ctDNA Detection for Intravascular Sensing in Intrabody Nanonetworks

Liquid biopsy can detect tumor-derived biomarkers such as circulating tumor DNA (ctDNA), but ultra-low-fraction assays remain costly, slow, and difficult to scale. This motivates interest in intravascular in vivo sensing in the context of intrabody nanonetworks, where nanosensors could support local biomarker monitoring. BioFET-based nanosensors are relevant here because they are label-free, highly miniaturizable, and have shown strong ctDNA sensitivity in controlled media. We examine whether this sensitivity still yields reliable ctDNA detection in whole blood using a reduced-order stochastic simulation model that links operating-point selection, Debye-screened charge transduction, stochastic finite-capacity binding, nonspecific adsorption, background fluctuations, and intrinsic electronic noise to blank-threshold detection. Monte Carlo evaluation with physiologically grounded parameters shows that short Debye length and several-nanometer charge-to-channel separation attenuate the current shift, while low-frequency noise and background fluctuations reduce the margin between target-present and blank responses. Under the tested quasi-static charge-gating regime, the simulated current shifts do not reliably exceed the blank-derived threshold at low ctDNA concentrations. The model therefore provides a whole-blood boundary analysis that identifies which interface configurations and operating conditions most strongly limit reliable BioFET-based intravascular ctDNA detection.

cs.ET↗
arXiv2026

Beyond HBM-on-GPU: Thermal Design Envelope for 3D Volumetric DRAM-on-GPU Integration

The scaling of GPUs for AI and HPC workloads is increasingly constrained by the capacity, bandwidth, and thermal limits of both 2.5D HBM-GPU and direct-stacked 3D HBM-on-GPU integration. This work establishes the thermal design envelope for 3D volumetric DRAM-on-GPU integration, in which vertically oriented DRAM dies and interleaved cooling cavities reshape heat flow and memory interfacing above the GPU. Using a package-level thermal model anchored to a consistent HBM-on-GPU baseline and driven by a realistic reticle-scale non-uniform GPU power map, we quantify the key parameters governing thermal feasibility. Stack height is the dominant limiter of peak temperature, while cooling-cavity conductivity shifts the feasible region, and mold insertion and stack orientation further modulate thermal behavior. A distributed memory-controller and network-on-chip tier introduces only a moderate thermal penalty. Although die-level parallelism increases bandwidth, the reduction in simulated training time saturates once execution becomes compute-bound. These results define a bounded co-design space across bandwidth, capacity, and thermal constraints for 3D volumetric DRAM-on-GPU integration.

cs.ET↗
arXiv2026

Droop-Aware Foundation Model Power Flow

This paper develops a droop-aware extension of the GridFM power systems foundation model, embedding droop gains and frequency/voltage deadband parameters as per-bus node features to enable control-aware AC power-flow analysis. Existing power-flow datasets encode only static electrical features, conflating operating points from qualitatively different control regimes; this work resolves that gap by exposing droop and deadband parameters as structured node features, with deadband discontinuities handled through a smooth tanh approximation that preserves solver differentiability. A transformer-based graph neural network is pre-trained on masked reconstruction and fine-tuned on the resulting control-aware datasets. The framework is validated against PSCAD electromagnetic-transient simulations on a two-bus system (0.11% maximum steady-state error) and cross-validated against an independent PyPower droop solver on the IEEE 24-bus RTS. On the 24-bus system the surrogate attains R2 = 0.9996 for active generation and 0.0015 p.u. voltage-magnitude RMSE; scalability is confirmed on the IEEE 300-bus system (0.0036 p.u. RMSE, R2 = 0.9841 for voltage magnitude across 299,700 predictions). A three-mode control study further shows that the deadband widens the control-error distribution while leaving total droop compensation unchanged, establishing deadband width as an actionable node-level design feature.

cs.ET↗