Search arXivSearch

arXiv · 2504.06691

Wake instability of a fixed spherical droplet with a high drop-to-fluid viscosity ratio

Abstract

Direct numerical simulations of a uniform flow past a fixed spherical droplet are performed to investigate the parameter range within which the axisymmetric flow becomes unstable due to an external flow bifurcation. The hydrodynamics is governed by three dimensionless numbers: the viscosity ratio, $μ^\ast$, and the external and internal Reynolds numbers, $\Rey^e$ and $\Rey^i$, respectively. The drop-to-fluid density ratio is related to these parameters as $ρ^\ast=μ^\ast \Rey^i/\Rey^e$. This study focuses on highly viscous droplets with $μ^\ast \geq 5$, where wake instability is driven by the vorticity flux transferred from the droplet surface into the surrounding fluid. By analysing the wake structure, we confirm that the onset of the external bifurcation is linked to the tilting of the azimuthal vorticity, $ω_ϕ$, in the wake and that the bifurcation occurs once the isocontours of $ω_ϕ$ align nearly perpendicular to the symmetry axis. We propose an empirical criterion for predicting the onset of the external bifurcation, formulated in terms of the maximum vorticity on the external side of the droplet surface. This criterion is applicable for sufficiently high $\Rey^i$ and holds over a wide range of $μ^\ast$ and $\Rey^e$. Additionally, we examine the bifurcation sequence for two specific external Reynolds numbers, $\Rey^e=300$ and $\Rey^e=500$, and show that, beyond a critical viscosity ratio, the axisymmetric wake first transitions to a steady planar-symmetric state before undergoing a secondary Hopf bifurcation. Finally, we highlight the influence of $\Rey^i$ on external bifurcation and show that, at moderate $\Rey^i$, wake instability may set in at a lower vorticity threshold than predicted by our criterion. These findings provide new insights into the external flow bifurcation of viscous droplets.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Pengyu Shi, Éric Climent, Dominique Legendre. 2025-04-09. Wake instability of a fixed spherical droplet with a high drop-to-fluid viscosity ratio. https://doi.org/10.1007/s10409-025-25253-x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Cross-helicity and chaotic dynamics of full-disc solar magnetic field

Using the results of laboratory experiments and direct numerical simulations, as well as observations of the full-disc solar magnetic field and sunspot number dynamics, it is demonstrated that cross-helicity can dominate the decaying part of the frequency power spectra of the magnetic field generated by a magnetohydrodynamic (MHD) dynamo in chaotic/turbulent swirling flows for sufficiently strong MHD turbulence (including the solar dynamo). The theoretical consideration is based on a Kolmogorov-like phenomenology within the framework of the distributed chaos concept. It is also shown that the solar full-disc magnetic field for the last two solar cycles with weak magnetic activity exhibits deterministic chaotic behavior concentrated around the equator.

physics.flu-dyn

Manifestation of spurious currents and interface regularization in wind turbulence over fast-propagating waves

Accurate simulation of wind turbulence over fast-propagating waves requires interface-capturing methods that suppress numerical artifacts while accurately resolving momentum transfer across the interface. In high wave-age regimes, numerical errors at the air-water interface can reach magnitudes comparable to the physical flow, directly affecting predicted turbulence statistics. This study examines widely used interface-capturing techniques to evaluate how curvature estimation and flux discretization influence wind-wave simulations through the resulting spurious currents and interface regularization. A systematic assessment is performed using static and translating droplet benchmarks, together with solitary and monochromatic wave cases, to identify and quantify the dominant numerical error mechanisms. In addition, comparison with experimental measurements reveals how these primary error sources manifest in coupled wind-wave simulations. These findings clarify the numerical origin of the observed discrepancies and underscore the importance of accurate curvature and flux treatment in high wave-age regimes, without which numerical artifacts risk being misattributed to genuine wind-wave physics.

physics.flu-dyn

A reconfigurable multi-axis cyber-physical framework for multi-regime fluid--structure interaction experiments

Fluid--structure interaction (FSI) experiments are typically built around mechanical dynamics and constraints imposed by the physical apparatus, so changing mass, stiffness, damping, or allowable motion often requires hardware reconfiguration. Here we present a reconfigurable cyber-physical framework in which these properties are instead assigned through software-defined dynamics. The system provides three translational and one rotational degree of freedom, each independently configurable as prescribed, load-responsive, or locked, with operating roles that can also be reassigned during a running experiment. Measured forces and torques are incorporated into real-time virtual dynamic models, while a common supervisory architecture coordinates multi-axis motion, mode switching, synchronized data acquisition, and diagnostic positioning. The prescribed-motion pathway is validated using a pitching hydrofoil by comparison with published thrust and power scaling trends, while the load-responsive pathway is evaluated using an active-heave/passive-pitch benchmark that reproduces the expected frequency-dependent resonant response over the tested conditions. The same platform is then reconfigured for intra-cycle active--passive pitching, coordinated vertical-axis turbine-surrogate motion, force-driven passive surge, and automated multilayer stereoscopic particle image velocimetry. These results demonstrate that distinct FSI boundary conditions and measurement requirements can be implemented within a common motion, sensing, and control architecture. By treating mechanical roles and constraints as software-defined experimental variables, the framework provides a reusable basis for reconfigurable FSI experiments without redesigning the underlying platform for each application.

physics.flu-dyn