Search arXivSearch

arXiv · 2504.13637

Robot Navigation in Dynamic Environments using Acceleration Obstacles

Abstract

This paper addresses the issue of motion planning in dynamic environments by extending the concept of Velocity Obstacle and Nonlinear Velocity Obstacle to Acceleration Obstacle AO and Nonlinear Acceleration Obstacle NAO. Similarly to VO and NLVO, the AO and NAO represent the set of colliding constant accelerations of the maneuvering robot with obstacles moving along linear and nonlinear trajectories, respectively. Contrary to prior works, we derive analytically the exact boundaries of AO and NAO. To enhance an intuitive understanding of these representations, we first derive the AO in several steps: first extending the VO to the Basic Acceleration Obstacle BAO that consists of the set of constant accelerations of the robot that would collide with an obstacle moving at constant accelerations, while assuming zero initial velocities of the robot and obstacle. This is then extended to the AO while assuming arbitrary initial velocities of the robot and obstacle. And finally, we derive the NAO that in addition to the prior assumptions, accounts for obstacles moving along arbitrary trajectories. The introduction of NAO allows the generation of safe avoidance maneuvers that directly account for the robot's second-order dynamics, with acceleration as its control input. The AO and NAO are demonstrated in several examples of selecting avoidance maneuvers in challenging road traffic. It is shown that the use of NAO drastically reduces the adjustment rate of the maneuvering robot's acceleration while moving in complex road traffic scenarios. The presented approach enables reactive and efficient navigation for multiple robots, with potential application for autonomous vehicles operating in complex dynamic environments.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Asher Stern, Zvi Shiller. 2025-04-18. Robot Navigation in Dynamic Environments using Acceleration Obstacles. https://arxiv.org/abs/2504.13637

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Highly-Efficient Differentiable Simulation for Robotics

Robotics simulators have improved significantly in computational speed and scalability, enabling them to generate years of simulated data for complex systems in minutes or hours. Despite these advances, efficiently and accurately computing simulation derivatives remains an open challenge. Addressing this would accelerate the convergence of reinforcement learning and trajectory optimization algorithms, particularly for contact-rich problems. This paper introduces a unifying framework for robotic simulation that accounts for all factors, including dynamics, collisions, and friction. The resulting algorithm computes analytical derivatives of the simulation by implicit differentiation, explicitly handling the intrinsic non-smoothness of the collision and frictional stages while exploiting the sparsity induced by the multi-body structure. Benchmark results demonstrate state-of-the-art performance, with timings ranging from $5\,μ$s for a 7-dof manipulator to $95\,μ$s for a 36-dof humanoid, an improvement of at least two orders of magnitude over alternative methods. Implemented in C++, the code will be open-sourced after the review process to support applications such as simulation-driven learning and real-time control.

cs.RO

GeCCo -- a Generalist Contact-Conditioned Policy for Loco-Manipulation Skills on Legged Robots

Most modern approaches to quadruped locomotion focus on using Deep Reinforcement Learning (DRL) to learn policies from scratch, in an end-to-end manner. Such methods often fail to scale, as every new problem or application requires time-consuming and iterative reward definition and tuning. We present Generalist Contact-Conditioned Policy (GeCCo) --- a low-level policy trained with Deep Reinforcement Learning that is capable of tracking arbitrary contact points with a quadruped robot. We shift from task-specific end-to-end learning to a modular hierarchy in which a single planner-agnostic, contact-conditioned tracking policy serves as a robust interface between planning and control. By maintaining stable contact execution under dynamic uncertainty and planner mismatch, the policy enables high-level planners (e.g., handcrafted, learned, or optimization-based) to be composed and swapped without retraining. We demonstrate the scalability and robustness of our method by evaluating on a wide range of locomotion and manipulation tasks in a common framework and under a single generalist policy. These include a variety of gaits, traversing complex terrains (e.g., stairs and slopes) as well as previously unseen stepping-stones and narrow beams, and interacting with objects (e.g., pressing a button, pushing a barrel). Our framework acquires new behaviors more efficiently, simply by combining a task-specific high-level contact planner and the pre-trained generalist policy. Project website: https://vassil-atn.github.io/gecco.github.io

cs.RO

ERUPT: An Open Toolkit for Interfacing with Robot Motion Planners in Extended Reality

We present the Extended Reality Universal Planning Toolkit (ERUPT), an extended reality (XR) system for interactive motion planning. This paper serves to introduce our open-source system to others who can use it as a base to develop immersive robot interaction applications. Our system allows users to create and dynamically reconfigure environments while they plan robot paths. ERUPT uses XR to provide a broad range of natural interaction capabilities, allowing users to grab and adjust objects in the environment similar to interaction in the real world, rather than using a mouse and keyboard with the scene projected onto a 2D computer screen. Our system integrates with MoveIt, a manipulation planning framework, allowing users to send motion planning requests and visualize the resulting robot paths in virtual or augmented reality. We provide a broad range of interaction modalities, allowing users to modify objects in the environment and interact with a virtual robot. Our system allows operators to visualize robot motions, ensuring desired behavior as it moves throughout the environment, without risk of collisions within a virtual space, and to then deploy planned paths on physical robots in the real world. Code can be found at https://github.com/parasollab/erupt.

cs.RO