Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2505.08315

viper: High-precision radial velocities from the optical to the infrared (Reaching 3 m/s in the K band of CRIRES+ with telluric modelling)

J. Köhler·M. Zechmeister·A. Hatzes·S. Chamarthi·E. Nagel·U. Seemann·P. Ballester·P. Bristow·P. Chaturvedi·R. J. Dorn·E. Guenther·V. D. Ivanov·Y. Jung·O. Kochukhov·T. Marquart·L. Nortmann·R. Palsa·N. Piskunov·A. Reiners·F. Rodler·J. V. Smoker
View original source ↗Read source document ↗Export metadata ↓

Abstract

In recent years, a number of new instruments and data reduction pipelines have been developed to obtain high-precision radial velocities (RVs). In particular in the optical, considerable progress has been made and RV precision below 50 cm/s has been reached. Yet, the RV precision in the near-infrared (NIR) is trailing behind. This is due to a number of factors, such as imprinted atmospheric absorption lines, lower stellar information content, different types of detectors, and usable calibration lamps. However, observations in the NIR are important for the search and study of exoplanets around cool low-mass stars that are faint at optical wavelengths. Not only are M dwarfs brightest in the NIR, the signal of stellar activity is also reduced at longer wavelengths. In this paper we introduce the RV pipeline viper (Velocity and IP EstimatoR). The philosophy of viper is to offer a publicly available and user-friendly code that is able to process data from various spectrographs. Originally designed to handle data from optical instruments, the code now has been extended to enable the processing of NIR data. viper uses a least-square fitting to model the stellar RV as well as the temporal and spatial variable IP. We have improved upon this method by adding a term for the telluric spectrum that enables the forward modelling of molecules present in the Earth's atmosphere. In this paper we use CRIRES+ observations in the K band to demonstrate viper's ability to handle data in the NIR. We show that it is possible to achieve an RV accuracy of 3 m/s over a period of 2.5 years with the use of a gas cell. Additionally, we present a study of the stability of atmospheric lines in the NIR. With viper it is possible to handle data taken with or without a gas cell, and we show that a long-term RV precision of around 10 m/s can be achieved when using only telluric lines for the wavelength calibration.

Explore related subjects

astro-ph.IM

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J. Köhler, M. Zechmeister, A. Hatzes, S. Chamarthi, E. Nagel, U. Seemann, P. Ballester, P. Bristow, P. Chaturvedi, R. J. Dorn, E. Guenther, V. D. Ivanov, Y. Jung, O. Kochukhov, T. Marquart, L. Nortmann, R. Palsa, N. Piskunov, A. Reiners, F. Rodler, J. V. Smoker. 2025-05-13. viper: High-precision radial velocities from the optical to the infrared (Reaching 3 m/s in the K band of CRIRES+ with telluric modelling). https://doi.org/10.1051/0004-6361%2F202553919

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Performance characterization of a new Structural and Thermal Architecture for a future spaceborne Closed-Cycle Dilution Refrigerator

A Structural and Thermal Model (STM) has been developed to support the new spaceborne Closed-Cycle Dilution Refrigerator (CCDR), which aims to provide continuous cooling at 100~mK for long-duration astrophysical missions. The STM is based on a hexapod architecture that ensures both thermal decoupling and mechanical robustness during launch. In this paper, we present the characterization of its thermal and mechanical performances. A dedicated experimental setup was used to investigate the thermal behavior of the STM across a broad temperature range. The study reveals limitations of the collar design, with incomplete power interception from thermal boundary resistances and vibration test failure traced to defective strut gluing. These results guide the next STM iteration with optimized collar and strut assembly for reliable CCDR operation in space.

astro-ph.IM↗
arXiv2026

The Simons Observatory: Development of a Pipeline to Detect Rapid Transients in Time-Ordered Data

We introduce a method for detecting astrophysical transients evolving on timescales of milliseconds to minutes using cosmic microwave background (CMB) survey telescopes. While previous transient searches in CMB data operate in map space, our pipeline directly processes the raw time-ordered data, enabling sensitivity to fast, dynamic signals. We integrate our detection approach into the Simons Observatory time-domain pipeline and assess the performance by injecting symmetric, stellar flare-like light curves into simulated observations. For events flaring with a timescale of 0.5 s, the pipeline detects $\gtrsim90$ % of events at flux densities of 800, 1150, 1650, and 4250\,mJy when measured in the 93, 145, 225, and 280 GHz bands respectively. At a fixed peak flux density, the pipeline more readily detects longer flares. The limiting flux density for 90 % completeness is four times lower for a $\ge5$ s flare than for a 0.5 s flare, while the flux density limits for $\gtrsim50$ % detection efficiency are comparable to the rms noise of the time-ordered data. We are able to determine the position of detected events in each observing band, with a positional uncertainty at the detection threshold comparable to the telescope resolution at that band. These results demonstrate the readiness of this pipeline for incorporation into upcoming Simons Observatory data analyses.

astro-ph.IM↗
arXiv2026

Thermal conductivity of various CFRPs from 100 mK to 20 K

Carbon-fiber-reinforced polymers (CFRPs) are some of the most useful materials for building spacecraft and aerospace tools. They are especially valuable for systems that work at extremely cold (cryogenic) temperatures because they are strong, lightweight, and don't transfer heat easily. In this study, researchers measured how well heat moves through several different types of carbon fiber samples, specifically T300, T700, HS40, M55J, and IMA, at different fiber layouts and densities. These measurements were taken at ultra-cold temperatures ranging from 100 mK to 20 K. The team used a newly developed analysis method to calculate the thermal conductivity for each sample. Finally, they shared how each material behaved at different temperatures and compared their findings to previous research.

astro-ph.IM↗