Search arXivSearch

arXiv · 2505.08564

Evidence of localized groundwater flow during thermal response test using distributed thermal sensing

Abstract

Four Borehole Heat Exchangers (BHE) were installed at the BRGM Shallow Geothermal Research Facility (BRGM-SGRF) in Orl{é}ans, France. They are sixty meters deep and eight meters apart on a line. The facility is localized in the Parisian sedimentary basin. The boreholes are in the Beauce Limestones geological layers, which are locally eroded and karstified. A special type of grouting materiel was used in order to investigate if the boreholes are actually grouted. These measures have confirmed that the four boreholes are grouted along the whole depth. Distributed Thermal Response Tests (DTRT) using optic cables alongside the heat exchangers were performed on each borehole. The distributed thermal sensing, combined with the thermal response test, allows discriminating the heat transfer between geological layers. While the first two boreholes temperature variations with respect to the depth is almost constant, again indicative of a purely conductive heat transfer, the DTS measurement technique gave evidence of a localized enhanced heat transfer on the last two boreholes, between 25 and 40 meters deep. This enhanced heat transfer is believed to be generated by a fast groundwater flow at these depths. What is remarkable is that such a rapid flow can be observed on roughly 15 meters height, while a borehole 8 meters apart exhibits a purely conductive temperature profile. The BRGM has develop a borehole heat exchanger model called SAMBA (Semi Analytical Model for Borehole heat exchanger). It discretizes the heat transfer according to the depth of the borehole, using the thermal resistance and capacity model of Bauer et al. (2011) to model heat transfer inside the borehole, and a moving infinite cylindrical source (MICS) for heat transfer in the ground. Inversion of the SAMBA model for the boreholes exhibiting groundwater flow has been performed to determine the mean ground thermal conductivity and the groundwater flow between 25 to 40 meters deep.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Antoine Voirand, Charles Maragna. 2025-05-13. Evidence of localized groundwater flow during thermal response test using distributed thermal sensing. https://arxiv.org/abs/2505.08564

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det

Characterization of immersed SiPM arrays in liquid scintillator between room temperature and $-30\,^{\circ}\mathrm{C}$

Liquid scintillator detectors instrumented with distributed silicon photomultiplier (SiPM) arrays can be used in compact, topology-sensitive, and low-background experiments, but the temperature dependence of SiPMs immersed directly in the scintillation medium has not been widely characterized. We report the operation of a 125-liter linear-alkylbenzene-based liquid scintillator detector read out by 125 SiPM channels immersed in the active volume, over the range from room temperature to $-30\,^{\circ}\mathrm{C}$. The detector response was measured with cosmic-ray muons, including stopping muons followed by their Michel-electron decay. Cooling from $+15\,^{\circ}\mathrm{C}$ to $-30\,^{\circ}\mathrm{C}$ reduced the SiPM dark-count rate by a factor of 13.5, increased the single-photoelectron response by 49.1%, and increased the cosmic-ray muon light yield by 16.7%. The improved photoelectron separation and baseline stability at low temperature enabled a selection of stopping-muon events, from which the effective muon lifetime was measured to be $1959\pm132\,\mathrm{ns}$, consistent with the value expected for a hydrocarbon scintillator once $μ^{-}$ capture on carbon is taken into account.

physics.ins-det