Search arXivSearch

arXiv · 2505.20317

Measurement of cosmic muon-induced events in an HPGe detector using time-coincidence technique

Abstract

Detailed understanding and suppression of backgrounds are among the key challenges faced by Coherent Elastic Neutrino-Nucleus Scattering (CE\ensuremathνNS) experiments. The sensitivity of these experiments is largely determined by the background levels arising from various sources. Above-ground and shallow-overburden neutrino experiments typically employ passive shielding, primarily composed of lead (Pb), to suppress environmental $γ$ background. However, such shielding can introduce additional backgrounds that are particularly challenging for CE\ensuremathνNS experiments. These backgrounds arise mainly from $γ$ and neutrons produced by cosmic muon interactions in the shielding, and their contribution can become significant depending on the amount of Pb shielding used. In the current work, we measure the yield of secondary particles originating from Pb as a result of high-energy cosmic muon interaction, using a high-purity germanium (HPGe) detector and plastic scintillators. A time-coincidence technique is used to identify and reject these secondary background events from the experimental data. The obtained mean characteristic time of these residual background events is 11 $\pm$ 4 $μ$s, which is consistent with the Geant4-based MC simulation result of 11 $\pm$ 1 $μ$s. The measured efficiency-corrected rate of muon-induced events in the HPGe detector is 34 $\pm$ 1 (stat.) $\pm$ 3 (sys.) day$^{-1}$kg$^{-1}$ within the energy range of 30 keV to 2000 keV. The yield of muon-induced secondary backgrounds in 10 cm thick Pb shielding is evaluated to be $(11 \pm 1 (\text{stat.}) \pm 1 (\text{sys.}))$ secondary events$\thinspace\text{kg}^{-1}\thinspace\mathrm{m^{-2}}\thinspace\text{muon}^{-1}$ at sea level.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Roni Dey, Dipanwita Mondal, Sudipta Das, Varchaswi K. S. Kashyap, Bedangadas Mohanty. 2025-05-23. Measurement of cosmic muon-induced events in an HPGe detector using time-coincidence technique. https://arxiv.org/abs/2505.20317

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det