ILC250 Cost Update -- 2024

Gerald Dugan; Andrew J. Lankford; Benno List; Shinichiro Michizono; Tatsuya Nakada; Marc Ross; Hiroshi R. Sakai; Steinar Stapnes; Nobuhiro Terunuma; Nicholas Walker; Akira Yamamoto

arXiv · 2506.00353

ILC250 Cost Update -- 2024

Gerald Dugan·Andrew J. Lankford·Benno List·Shinichiro Michizono·Tatsuya Nakada·Marc Ross·Hiroshi R. Sakai·Steinar Stapnes·Nobuhiro Terunuma·Nicholas Walker·Akira Yamamoto

View original source ↗Read source document ↗Export metadata ↓

Abstract

The International Linear Collider was conceived as a global project for an energy-frontier electron-positron collider.It employs superconducting RF and nano-beam technologies with a center-of-mass energy of 500 GeV. Its cost was estimated in 2013, based on the Technical Design Report published in 2013.Japan's high-energy community proposed to host the ILC in Japan as a Higgs boson factory at 250 GeV in its first phase, and a revised cost estimate was conducted in 2017 to host it in Japan. However, due to global price increases and currency fluctuations that emerged afterward, the 2017 estimate is now outdated. A new cost evaluation has therefore been performed, according for global inflation tends, exchange rate shifts, and recent experiences in SRF based accelerators. This report describes the cost update performed in 2024. The cost update is included in the ILC Status Report in May 2025, contributing to the ongoing 2026 update of the European Strategy for Particle Physics.

Explore related subjects

physics.acc-ph hep-ex

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Gerald Dugan, Andrew J. Lankford, Benno List, Shinichiro Michizono, Tatsuya Nakada, Marc Ross, Hiroshi R. Sakai, Steinar Stapnes, Nobuhiro Terunuma, Nicholas Walker, Akira Yamamoto. 2025-07-17. ILC250 Cost Update -- 2024. https://arxiv.org/abs/2506.00353

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

High-power attosecond X-ray free-electron lasers: physics and design strategy

Attosecond pulses from X-ray free-electron laser (XFEL) have opened new opportunities for probing ultrafast electronic dynamics on the Angstrom--attosecond spatiotemporal scale. Most attosecond XFEL concepts rely on generating an ultrashort high-current spike through either external laser modulation or accelerator-based beam manipulation. Despite their different implementations, these approaches share the same essential physics, namely that the XFEL amplification is confined to a short effective lasing window within the electron beam. However, existing studies are often scheme-specific and do not yet provide a unified quantitative picture of how fundamental electron-beam properties constrain high-power attosecond performance. In this work, we investigate the general physics and scheme-independent requirements for generating high-power attosecond X-ray pulses from a short current spike. From the perspective of post-saturation superradiant evolution, we show that the effective lasing length of the electron beam governs both the attainable peak power and the pulse duration. We further examine the distinct roles of slice energy spread, slice emittance, energy chirp, undulator tapering, and transverse beam tilt. Our results reveal the trade-off between peak power, pulse shortening, and single-spike probability, and provide facility-independent guidelines for optimizing electron-beam phase-space manipulation toward terawatt-class attosecond XFEL operation.

physics.acc-ph↗

arXiv2026

Realizing A Hard X-Ray Storage Ring Free Electron Laser Oscillator at the APS-U

We show that the APS-U could support a hard X-ray storage ring free electron laser oscillator, providing a promising avenue toward high repetition rate, narrow bandwidth coherent light sources. The results of our numerical simulations demonstrate that a transverse gradient undulator yields ~8% and ~6% single-pass gain at 8.05 keV and 10 keV respectively. We further identify a configuration at 5 keV that does not require a TGU but still exceeds a 5% gain threshold despite the relatively short 5-meter long insertion device. All cases presented retain spectral purity on the order of meV and reach a steady-state output whose equilibrium is consistent with the Renieri Saturation Limit. We have calculated the 5 keV case to have an average brightness of ~10^26 photons/(s * mm2 * mrad2 * 0.1% BW), representing an increase in more than four orders of magnitude from the standard APS-U undulator. These results indicate that a storage ring free electron laser oscillator at multi-keV photon energies is feasible with nominal APS-U parameters and standard x-ray cavity optics.

physics.acc-ph↗

arXiv2026

Bayesian Optimization of The Relativistic Heavy Ion Collider Luminosity via $s^*$ Control

Maximizing luminosity at the interaction point (IP) requires the collision location $s_{IP}$ to coincide with the longitudinal position of the minimum beta function, $s^$. Accurate optics measurements and control of $s^$ are therefore essential for luminosity optimization. At the Relativistic Heavy Ion Collider (RHIC), average horizontal beta-beat measurements between operating IPs are approximately $20%$, with significant variation in measured $s^*$. Precise control of the beam waist position $s^$ is particularly challenging for modern high-energy colliders with short bunch lengths and large crossing angles. We present an online Bayesian optimization (BO) application using the GPTune framework to optimize sPHENIX luminosity through $s^$ control at RHIC. GPTune was first validated at the RHIC Electron Beam Ion Source (EBIS), where it achieved up to a $70%$ increase in beam intensity over the baseline, although experienced operators could reach similar performance with longer manual tuning. The framework was subsequently deployed during sPHENIX operations. Using an intensity-normalized Zero-Degree Calorimeter (ZDC) signal as the optimization objective, due to the unavailability of the live sPHENIX MVTX signal, GPTune identified local luminosity maxima, recovered from intentionally degraded $s^$ configurations, and revealed residual horizontal and vertical waist offsets in the interaction region. These results demonstrate the robustness and efficiency of Bayesian optimization for real-time collider tuning under noisy, time-varying conditions. The $s^$ control methodology provides a promising tool for precision luminosity optimization and is particularly relevant to next-generation short-bunch colliders such as the Electron-Ion Collider (EIC).

physics.acc-ph↗