Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2506.04680

A Three-Stage Offline SDRE-Based Control Framework for Human Motion Reproduction on a Suspended Bipedal Robot

Ping-Kong Huang·Chien-Wu Lan·Chin-Tien Wu·Ching-Kai Lin
View original source ↗Read source document ↗Export metadata ↓

Abstract

Evaluating lower limb exoskeletons directly with human subjects can expose users to risk when actuator faults, joint misalignment, or unsuitable assistance occur. Therefore, captured human motion must first be converted into commands that are executable by the robot hardware and repeatable across trials. This paper presents a three-stage offline command generation framework for reproducing lower limb motion and torque on a suspended bipedal robot platform used as a robotic bench system for exoskeleton evaluation. First, State-Dependent Riccati Equation control is applied to the robot dynamic model to obtain a reference torque trajectory associated with measured lower limb motion. Second, parameterized optimization converts this reference into trapezoidal joint velocity commands subject to motor speed and acceleration limits. Third, a proportional-integral-derivative linear quadratic regulator (PID-LQR) compensation refines the command profiles using experimental tracking data. Walking and squatting motions recorded by a Vicon motion capture system are reproduced on the suspended robot to evaluate tracking accuracy and repeatability. The results show that the average root mean square error (RMSE) and standard deviation (STD) of joint angles across repeated trials remain below 3° and 0.15°, respectively. Comparisons of joint angles and torques further show that the proposed method achieves lower maximum RMSE and STD values than the two baseline controllers in all reported cases. These results indicate that the proposed three-stage control provides repeatable and actuator-feasible motion reproduction on a suspended bipedal robot platform as a preliminary test environment for lower limb exoskeleton research before tests involving human subjects.

Explore related subjects

cs.ROmath.OC

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Ping-Kong Huang, Chien-Wu Lan, Chin-Tien Wu, Ching-Kai Lin. 2026-07-30. A Three-Stage Offline SDRE-Based Control Framework for Human Motion Reproduction on a Suspended Bipedal Robot. https://arxiv.org/abs/2506.04680

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

J-PARSE: Jacobian-based Projection Algorithm for Resolving Singularities Effectively in Inverse Kinematic Control of Serial Manipulators

J-PARSE is an algorithm for smooth first-order inverse kinematic control of a serial manipulator near kinematic singularities. The commanded end-effector velocity is interpreted component-wise, according to the available mobility in each dimension of the task space. First, a substitute ''Safety'' Jacobian matrix is created, keeping the aspect ratio of the manipulability ellipsoid above a threshold value. The desired velocity is then projected onto non-singular and singular directions, and the latter projection scaled down by a factor informed by the altered mobility. A right-inverse of the non-singular Safety Jacobian is applied to the modified command. In the absence of joint limits and collisions, this ensures safe transition into and out of low-mobility configurations, guaranteeing locally stable reaching behavior towards target poses within, on the boundary of, and outside the workspace. The behavior is further guaranteed to be locally asymptotically stable if the starting and target configurations are not exactly singular, even if they are nearly singular. Velocity control with J-PARSE is benchmarked against approaches from the literature, illustrating its use of a single tuning parameter to simultaneously achieve high reaching accuracy and stable behavior. Applications in teleoperation, servoing, and learning are demonstrated. Videos and code are available at https://jparse-manip.github.io/.

cs.RO↗
arXiv2026

NeMo-map: Neural Implicit Flow Fields for Spatio-Temporal Motion Mapping

Safe and efficient robot operation in complex human environments can benefit from good models of site-specific motion patterns. Maps of Dynamics (MoDs) provide such models by encoding statistical motion patterns in a map, but existing representations use discrete spatial sampling and typically require costly offline construction. We propose a continuous spatio-temporal MoD representation based on implicit neural functions that directly map coordinates to the parameters of a Semi-Wrapped Gaussian Mixture Model. This removes the need for discretization and imputation for unevenly sampled regions, enabling smooth generalization across both space and time. Evaluated on two public datasets with real-world people tracking data, our method achieves better accuracy of motion representation and smoother velocity distributions in sparse regions while still being computationally efficient, compared to available baselines. The proposed approach demonstrates a powerful and efficient way of modeling complex human motion patterns and high performance in the trajectory prediction downstream task. The code is publicly available at https://github.com/test-bai-cpu/nemo-map.

cs.RO↗
arXiv2026

Spatiotemporal Calibration of Doppler Velocity Logs for Underwater Robots

The calibration of extrinsic parameters and clock offsets between sensors for high-accuracy performance in underwater SLAM systems remains insufficiently explored. Existing methods for Doppler Velocity Log (DVL) calibration are either constrained to specific sensor configurations or rely on oversimplified assumptions, and none jointly estimate translational extrinsics and time offsets. We propose a Unified Iterative Calibration (UIC) framework for general DVL sensor setups, formulated as a Maximum A Posteriori (MAP) estimation with a Gaussian Process (GP) motion prior for high-fidelity motion interpolation. UIC alternates between efficient GP-based motion state updates and gradient-based calibration variable updates, supported by a provably statistically consistent sequential initialization scheme. The proposed UIC can be applied to IMU, cameras and other modalities as co-sensors. We release an open-source DVL-camera calibration toolbox. Beyond underwater applications, several aspects of UIC-such as the integration of GP priors for MAP-based calibration and the design of provably reliable initialization procedures-are broadly applicable to other multi-sensor calibration problems. Finally, simulations and real-world tests validate our approach.

cs.RO↗