Search arXivSearch

arXiv · 2506.13826

Study of neutron response using time of flight technique in ISMRAN detector

Abstract

We report the measurements of the fast neutron energy response in Indian Scintillator Matrix for Reactor Anti-Neutrinos (ISMRAN) detector consisting of an array of 9$\times$10 Plastic Scintillator Bars (PSBs) at BARC, Mumbai. ISMRAN is an above ground detector setup at $\sim$13 m from the Dhruva reactor core for the detection of reactor anti-neutrinos (${\overline{\ensuremathν}}_{e}$) via the inverse beta decay (IBD) process. The dominant sources of reactor-related background in the vicinity of the detector are high energy $γ$-rays and fast neutrons. Therefore, a good understanding of fast neutron response in PSB is an essential pre-requisite for suppression and discrimination of the fast neutron background from IBD events. Kinetic energies of the fast neutron were determined using the Time-of-Flight (TOF) technique, which is used to get the scintillation light yield due to recoiling proton in PSB. We also measured the fast neutron capture time distribution in ISMRAN array using a novel technique involving TOF of the measured fast neutrons. The observed characteristic neutron capture time ( $τ$ ) of 68.29 $\pm$ 9.48 $μ$s is in good agreement with GEANT4 based MC simulation. These experimentally measured results will be useful for discriminating correlated and uncorrelated (accidental) background events from the true IBD events in reactor ON and OFF conditions inside the reactor hall.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

R. Dey, P. K. Netrakanti, D. K. Mishra, S. P. Behera, R. Sehgal, V. Jha, L. M. Pant. 2025-06-15. Study of neutron response using time of flight technique in ISMRAN detector. https://doi.org/10.1007/978-3-031-19268-5_14

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det