Search arXivSearch

arXiv · 2506.22702

A Correlation-Based Design of RIS for Reduced Power Consumption and Simplified Control Circuitry

Abstract

Aiming at simplifying the hardware structure and reducing the energy consumption in wireless communication via reconfigurable intelligent surfaces (RIS), this paper introduces a novel RIS design founded on the correlation between the phase shift values of the surface elements. First, a correlation analysis is conducted, considering the azimuth angle of a target device within a coverage region spanning from $-80^{\circ}$ to $80^{\circ}$. The correlation is demonstrated for different deployment cases, creating the basis for the new RIS structure, termed Connected-RIS, where correlated elements are designed to share the same control signal. The fundamental performance of the proposed design is then analyzed in terms of control signals, power consumption, and communication system performance, comparing it to two RIS structures with full control: one with the same size as the proposed design, and the other employing the minimum number of elements necessary to satisfy the fair coverage criterion. The correlation-based RIS design enables three-dimensional passive beamforming and significantly reduces the number of required load impedances and control signals, thereby lowering the hardware cost and simplifying the control circuitry. It also achieves substantial power savings as compared to the baseline schemes, while maintaining sufficient gain for a fair radio coverage. For instance, numerical simulations demonstrate that the proposed design reduces the power consumption by almost 86-92\% and the control signals by 83-98\% compared to operation with fully controlled RIS.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Zina Mohamed, Ammar B. Kouki, Sonia Aïssa. 2025-06-28. A Correlation-Based Design of RIS for Reduced Power Consumption and Simplified Control Circuitry. https://arxiv.org/abs/2506.22702

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Constrained Feedback Control of Nonlinear Systems via Approximate HJB and Control Barrier Functions

This paper presents a two-stage framework for constrained feedback control of input-affine nonlinear systems. Offline, an approximate value function for the unconstrained problem is computed, for example using Hamilton--Jacobi--Bellman (HJB)-based policy iteration. Online, the proposed quadratic program (QP) minimizes the pre-Hamiltonian evaluated using the approximate value-function gradient subject to safety constraints enforced by control barrier functions (CBFs). This architecture decouples performance optimization from constraint enforcement, allowing constraints to be modified without recomputing the value function. As in CBF-QP architectures based on control Lyapunov functions (CLFs), safety is enforced as a hard constraint; however, the performance objective targets approximate optimality rather than a prescribed Lyapunov decay. Numerical results on a linear 2-state hovercraft and a nonlinear 9-state spacecraft attitude-control problem show agreement with the constrained open-loop optimal control problem (OCP) benchmark in the linear case, and performance close to the OCP benchmark, improving on CLF-based controllers, in the nonlinear case.

eess.SY

Rao-Blackwellized Stein Gradient Descent for Joint State-Parameter Estimation

We present a filtering framework for online joint state estimation and parameter identification in nonlinear, time-varying systems. The algorithm uses a Rao-Blackwellization technique to infer joint state-parameter posteriors efficiently. In particular, conditional state distributions are computed analytically via Kalman filtering, while model parameters, including the measurement-noise covariance, are approximated using particle-based Stein Variational Gradient Descent (SVGD), enabling stable real-time inference. To handle parameters subject to physical constraints, we further introduce constrained variants that enforce them through an alternating direction method of multipliers (ADMM) splitting of the SVGD update, including nonlinear equality constraints that standard particle filters cannot readily handle. We derive a stability bound that relates the approximation error in the parameter posterior to the resulting error in the marginal state distribution. Performance of the proposed filters is validated on three case studies: a fed-batch bioreactor with Haldane kinetics and a damped pendulum, both under physical constraints, and a neural-network-augmented dynamic system. The examples cover parameter estimation under inequality and equality constraints and online neural-network training within a dynamical model.

eess.SY

Firing Rate Neural Network Implementations of Model Predictive Control

Human and animal brains perform planning to enable complex movements and behaviors, a process that can be effectively described using model predictive control (MPC). How could the brain physically implement MPC? In this work, we translate model predictive controllers into firing rate neural networks, offering insights into the nonlinear neural dynamics that underpin planning. We propose a constructive method; no training is required. This is done first applying the projected gradient method to the dual problem to derive a baseline neural network implementation. We then use factorization and contraction analysis to systematically generate alternative network architectures; in other words, we systematically generate hypotheses for how planning is done in the brain via neural dynamics. Finally, we present numerical simulations to study different neural networks performing MPC to balance an inverted pendulum on a cart (i.e., balancing a stick on a hand), including one example in which imposing sparse connectivity (a property observed in brain networks) does not degrade control performance.

eess.SY