Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2507.18226

Advanced Ceramic Plasma Discharge Capillaries for high repetition rate operation

Lucio Crincoli·Romain Demitra·Valerio Lollo·Donato Pellegrini·Marco Pitti·Lucilla Pronti·Martina Romani·Massimo Ferrario·Angelo Biagioni
View original source ↗Read source document ↗Export metadata ↓

Abstract

In view of future applications of plasma-based particle accelerators, within the fields of high-energy physics and new light sources, the capability of plasma sources to operate at high repetition rates is crucial. In particular for gas-filled plasma discharge capillaries, which allow direct control over plasma properties, a key aspect is the longevity of the material, subject to erosion due to the heat flux delivered by high voltage plasma discharges. In this regard, we present an innovative design of discharge capillaries based on the use of different ceramic materials, which can sustain high voltage plasma discharges at high repetition rate and, moreover, be easily machined for the complex geometries required for plasma-based accelerators. Experimental campaigns are carried out at 10-150 Hz, assessing the longevity of ceramic capillaries by means of different diagnostic techniques. In addition, numerical simulations are performed to analyze the heat transfer within the whole plasma source. Results from experimental and numerical analysis highlight the capability of ceramic capillaries to preserve plasma properties and the integrity of the source during long-term plasma discharge operation at high repetition rate. In particular, we demonstrated the suitability of the proposed solution for the operative range of 100-400 Hz, foreseen for EuPRAXIA@SPARC_LAB project.

Explore related subjects

physics.acc-phphysics.plasm-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Lucio Crincoli, Romain Demitra, Valerio Lollo, Donato Pellegrini, Marco Pitti, Lucilla Pronti, Martina Romani, Massimo Ferrario, Angelo Biagioni. 2025-07-24. Advanced Ceramic Plasma Discharge Capillaries for high repetition rate operation. https://doi.org/10.1038/s41598-025-96882-y

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

High-power attosecond X-ray free-electron lasers: physics and design strategy

Attosecond pulses from X-ray free-electron laser (XFEL) have opened new opportunities for probing ultrafast electronic dynamics on the Angstrom--attosecond spatiotemporal scale. Most attosecond XFEL concepts rely on generating an ultrashort high-current spike through either external laser modulation or accelerator-based beam manipulation. Despite their different implementations, these approaches share the same essential physics, namely that the XFEL amplification is confined to a short effective lasing window within the electron beam. However, existing studies are often scheme-specific and do not yet provide a unified quantitative picture of how fundamental electron-beam properties constrain high-power attosecond performance. In this work, we investigate the general physics and scheme-independent requirements for generating high-power attosecond X-ray pulses from a short current spike. From the perspective of post-saturation superradiant evolution, we show that the effective lasing length of the electron beam governs both the attainable peak power and the pulse duration. We further examine the distinct roles of slice energy spread, slice emittance, energy chirp, undulator tapering, and transverse beam tilt. Our results reveal the trade-off between peak power, pulse shortening, and single-spike probability, and provide facility-independent guidelines for optimizing electron-beam phase-space manipulation toward terawatt-class attosecond XFEL operation.

physics.acc-ph↗
arXiv2026

Realizing A Hard X-Ray Storage Ring Free Electron Laser Oscillator at the APS-U

We show that the APS-U could support a hard X-ray storage ring free electron laser oscillator, providing a promising avenue toward high repetition rate, narrow bandwidth coherent light sources. The results of our numerical simulations demonstrate that a transverse gradient undulator yields ~8% and ~6% single-pass gain at 8.05 keV and 10 keV respectively. We further identify a configuration at 5 keV that does not require a TGU but still exceeds a 5% gain threshold despite the relatively short 5-meter long insertion device. All cases presented retain spectral purity on the order of meV and reach a steady-state output whose equilibrium is consistent with the Renieri Saturation Limit. We have calculated the 5 keV case to have an average brightness of ~10^26 photons/(s * mm2 * mrad2 * 0.1% BW), representing an increase in more than four orders of magnitude from the standard APS-U undulator. These results indicate that a storage ring free electron laser oscillator at multi-keV photon energies is feasible with nominal APS-U parameters and standard x-ray cavity optics.

physics.acc-ph↗
arXiv2026

Bayesian Optimization of The Relativistic Heavy Ion Collider Luminosity via $s^*$ Control

Maximizing luminosity at the interaction point (IP) requires the collision location $s_{IP}$ to coincide with the longitudinal position of the minimum beta function, $s^$. Accurate optics measurements and control of $s^$ are therefore essential for luminosity optimization. At the Relativistic Heavy Ion Collider (RHIC), average horizontal beta-beat measurements between operating IPs are approximately $20%$, with significant variation in measured $s^*$. Precise control of the beam waist position $s^$ is particularly challenging for modern high-energy colliders with short bunch lengths and large crossing angles. We present an online Bayesian optimization (BO) application using the GPTune framework to optimize sPHENIX luminosity through $s^$ control at RHIC. GPTune was first validated at the RHIC Electron Beam Ion Source (EBIS), where it achieved up to a $70%$ increase in beam intensity over the baseline, although experienced operators could reach similar performance with longer manual tuning. The framework was subsequently deployed during sPHENIX operations. Using an intensity-normalized Zero-Degree Calorimeter (ZDC) signal as the optimization objective, due to the unavailability of the live sPHENIX MVTX signal, GPTune identified local luminosity maxima, recovered from intentionally degraded $s^$ configurations, and revealed residual horizontal and vertical waist offsets in the interaction region. These results demonstrate the robustness and efficiency of Bayesian optimization for real-time collider tuning under noisy, time-varying conditions. The $s^$ control methodology provides a promising tool for precision luminosity optimization and is particularly relevant to next-generation short-bunch colliders such as the Electron-Ion Collider (EIC).

physics.acc-ph↗