Search arXivSearch

arXiv · 2508.19693

Testing a Computed Tomography Imaging Spectrometer for Earth Observations on the HEIMDAL Stratospheric Balloon Mission

Abstract

Stratospheric High Altitude Balloons (HABs) have great potential as a remote sensing platform for Earth Observations that complements orbiting satellites and low flying drones. At altitudes between 20-35 kms, HABs operate significantly closer to ground than orbiting satellites, but significantly higher than most drones. HABs therefore offer a unique potential to deliver high spatial resolution imaging with large area coverage. Another two imaging parameters that are important for Earth Observation applications are spectral resolution and spectral range. In this paper, we therefore present the development and testing of a hyperspectral imaging system, able to record near-video-rate images in narrow contiguous spectral bands, from a HAB platform. In particular, we present the first stratospheric environmental tests and HAB flight of a snapshot hyperspectral camera, based on Computed Tomography Imaging Spectroscopy (CTIS), which is well suited to cope with the challenges posed by the motion of the HAB platform and the stratospheric environment. We have successfully acquired images with the system under both simulated stratospheric conditions in the Mars Simulation Laboratory at Aarhus University and during a 5 hour HAB flight mission named HEIMDAL from Kiruna in October 2024 as part of the REXUS/BEXUS 34/35 2024 campaign organized by DLR-SNSA. The study represents a step towards deploying the HAB platform for high quality land cover classification.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mads Juul Ahlebæk, Albertino Antonio Almeida Bach, Loui Collin-Enoch, Christian Cordes, Boas Hermansson, Christian Hald Jessen, Søren Peter Jørgensen, Tobias Jørgensen, Viktor Ulrich Kanstrup, Laurits Tværmose Nielsen, Jes Enok Steinmüller, Mads Svanborg Peters, Jonathan Merrison, René Lynge Eriksen, Christoffer Karoff, Mads Toudal Frandsen. 2025-08-27. Testing a Computed Tomography Imaging Spectrometer for Earth Observations on the HEIMDAL Stratospheric Balloon Mission. https://arxiv.org/abs/2508.19693

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det