Search arXivSearch

arXiv · 2509.24944

Experimental Study of Magnetic Near-Field Microstrip Electronic Probe for PCB EMC Emission Measurement

Abstract

An experimental study on magnetic near-field (NF) scanning of printed circuit board (PCB) emission radiation is developed in this paper. The design and installation of the electromagnetic (EM) NF scanner is introduced. The test bed of magnetic NF emission in the microwave frequency range is described. The methodology of the microstrip magnetic NF probe is discussed. The probe calibration process was performed following the IEC 61967-1 NF scanning standard. The NF scanner functioning is tested with passive microstrip circuit square loop probe and device under test (DUT) PCB radiation in the test plan positioned at 1-mm above the ground plane. Based on the standard test with I-shape 50-$Ω$ transmission line (TL), the calibration process of radiated magnetic field was validated by comparison between HFSS__ simulation and experimentation in very wideband frequency from 0.1-GHz to 3-GHz. Then, a nonstandard TL based DUT was experimented. Accordingly, the cartographies of scanned magnetic NF at two different test frequencies, 2 GHz and 3 GHz, are discussed. The NF scanner is under development for targeting the EMC radiated emission of PCB dedicated to operate in 6G wireless communication.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Hongchuan Jia, Fayu Wan, Vladimir Mordachev, Jérôme Rossignol, Glauco Fontagalland, Nour Murad, Blaise Ravelo. 2025-09-29. Experimental Study of Magnetic Near-Field Microstrip Electronic Probe for PCB EMC Emission Measurement. https://arxiv.org/abs/2509.24944

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Decoding Delay Guarantees of Space Regulated Multiple Access Random Wireless Networks using Successive Interference Cancellation

This paper is focused on decoding delay guarantees in wireless networks, where messages have a given signal-to-interference-plus-noise ratio threshold $η_0$ to meet in order to be successfully decoded, and where transmissions should occur within some strict time constraints. Its main contribution consists in quantifying the worst-case transmissions decoding delays in the uplink of cellular and cell-free networks using successive interference cancellation. We show how such decoding delay guarantees can be obtained using spatial network calculus, a new tool introduced recently, and in particular spatial regulation. The results rely on the assumption of absence of fading. We nevertheless outline what this approach will lead to in the fading case for cellular networks.

cs.NI

Toward Composable Network Digital Twins: A Subgraph-Based Latency Prediction Study

Modern networks must support changing topologies, configurations, and performance objectives, motivating fast and reliable performance estimation. Network digital twins (NDTs) enable what-if analysis for performance estimation in such network scenarios, however, existing machine learning-based NDT approaches often rely on entire topology representations, which are inherently monolithic and lack reusability under topological or traffic changes in the network. This paper introduces a composable NDT approach that decomposes networks into subgraphs represented by reusable unit twins that capture subgraph structure, configuration and traffic behaviours. A lightweight composer aggregates unit twin combinations to create NDTs that predict per-route end-to-end latency through an overall topology. Evaluation across controlled synthetic topologies and diverse traffic scenarios, real-world Topology Zoo topologies, and a public NDT challenge dataset demonstrates that the composable NDTs achieve high in-distribution accuracy while remaining stable under out-of-distribution scenarios. Comparison with monolithic full topology NDTs demonstrates that our composable approach achieves reusability, while achieving comparable or superior accuracy.

cs.NI

Pattern-Aware Virtual Network Embedding Optimization for Cloud Data Centers

The network virtualization (NV) technology has enabled the sharing of multiple resources among virtual networks (VNs) in cloud data centers. One of the key challenges is to allocate resources in real-time for virtual network request (VNR), which is known as online virtual network embedding (VNE). However, the existing online VNE methods do not exploit the multi-dimensional complementary relationship among diverse VNRs, resulting in the fragmentation and waste of substrate resources. In this paper, we propose the pattern matching based online VNE approach by constructing appropriate matching rules among observed patterns to maximize resources utilization. We devise the clustering based VNRs quantization method and conduct rigorous study on the pattern combination filtering problem. Then, we utilize the column generation to solve it and construct the pattern matching rules. Based on the rules, we propose an online pattern matching VNE algorithm with linear worst-case complexity. Evaluation on a 106-server testbed using Alibaba production cluster trace dataset shows that our algorithm achieves close-to-offline performance and more accepted workloads that outperforms traditional designs by 25%-30%.

cs.NI