Search arXivSearch

arXiv · 2510.15270

Performance of FBK VUV-HD3 and HPK VUV4 SiPMs in the Light-only Liquid Xenon (LoLX) Detector

Abstract

Silicon Photomultipliers (SiPMs) are a critical technology for the next generation of rare-event search experiments using liquid xenon (LXe). LXe scintillation is emitted primarily in the vacuum-ultraviolet (VUV), requiring photosensors with high VUV detection efficiency under cryogenic operating conditions. Direct characterization of VUV-sensitive SiPMs in LXe is therefore important for informing detector design and comparing device response. This work presents a direct comparison of Fondazione Bruno Kessler (FBK) VUV-HD3 and Hamamatsu (HPK) VUV4 SiPMs operated simultaneously within the Light-only Liquid Xenon (LoLX) detector. Using data collected with gamma sources placed outside the detector, we characterized the relative performance of these photosensors. Our analysis reveals that under these operating conditions, the HPK SiPMs observe 33-38% less light than the FBK devices, a larger difference than predicted by standard PDE models in vacuum measurements. We show that this discrepancy is resolved by an angular and wavelength dependent PDE model incorporating surface shadowing effects into our optical simulation, which then accurately reproduces the experimental data. This finding has significant implications for the selection and implementation of photosensors in future large-scale LXe detectors.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Xiang Li, David Gallacher, Stephanie Bron, Thomas Brunner, Austin de St Croix, Frédéric Girard, Colin Hempel, Mouftahou Bakary Latif, Simon Lavoie, Chloé Malbrunot, Fabrice Retière, Marc-André Tétrault, Lei Wang. 2026-06-30. Performance of FBK VUV-HD3 and HPK VUV4 SiPMs in the Light-only Liquid Xenon (LoLX) Detector. https://doi.org/10.1088/1748-0221%2F21%2F08%2Fp08011

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det

Characterization of immersed SiPM arrays in liquid scintillator between room temperature and $-30\,^{\circ}\mathrm{C}$

Liquid scintillator detectors instrumented with distributed silicon photomultiplier (SiPM) arrays can be used in compact, topology-sensitive, and low-background experiments, but the temperature dependence of SiPMs immersed directly in the scintillation medium has not been widely characterized. We report the operation of a 125-liter linear-alkylbenzene-based liquid scintillator detector read out by 125 SiPM channels immersed in the active volume, over the range from room temperature to $-30\,^{\circ}\mathrm{C}$. The detector response was measured with cosmic-ray muons, including stopping muons followed by their Michel-electron decay. Cooling from $+15\,^{\circ}\mathrm{C}$ to $-30\,^{\circ}\mathrm{C}$ reduced the SiPM dark-count rate by a factor of 13.5, increased the single-photoelectron response by 49.1%, and increased the cosmic-ray muon light yield by 16.7%. The improved photoelectron separation and baseline stability at low temperature enabled a selection of stopping-muon events, from which the effective muon lifetime was measured to be $1959\pm132\,\mathrm{ns}$, consistent with the value expected for a hydrocarbon scintillator once $μ^{-}$ capture on carbon is taken into account.

physics.ins-det