Search arXivSearch

arXiv · 2510.24245

Development and Flight Trial of a UAV-based Gamma Ray and Neutron Detection System for Large-Area Radioactivity Mapping and Source Activity Estimation

Abstract

Advances in scintillation crystal and Silicon PhotoMultiplier (SiPM) technologies have enabled the development of compact, lightweight, and low-power radiation detectors that are suitable for integration with Unmanned Aerial Vehicles (UAVs). This integration enables efficient and cost-effective large-area radiation monitoring while minimising occupational exposure. In this work, a SiPM-based NaIL scintillation detection payload was developed, characterised, and mounted on a multirotor UAV for gamma ray and neutron source localisation and activity estimation applications. To support these capabilities, an analytic radionuclide detection efficiency model was developed and used to estimate radioactivity on the ground from aerial energy spectrum measurements. The analytic expression for the detection efficiency incorporated physical phenomena, including the branching ratio, detector solid angle, air attenuation, and intrinsic peak efficiency, leading to agreement within 10% of experimental radionuclide detection efficiencies. The UAV-based radiation detection system was physically validated through a controlled indoor live radioactive source demonstration at 1.5 m, 3 m, and 4.5 m flight heights. Using the developed ground-level radioactivity estimation method, Cs-137 and Co-60 sources were successfully localised within 0.5 m, and their activities were estimated with errors on the order of 10% or less.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Lysander Miller, Airlie Chapman, James Kennedy, Richard Hebden, Jeremy M. C. Brown. 2025-10-28. Development and Flight Trial of a UAV-based Gamma Ray and Neutron Detection System for Large-Area Radioactivity Mapping and Source Activity Estimation. https://arxiv.org/abs/2510.24245

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det