On Improving Nuclear Fuel Imaging Using Position Sensitive Detectors

Erik Brücken; Peter Andersson; Mihaela Bezak; Peter Dendooven; Sofia Godø; Stefan Holm; Matti Kalliokoski; Aage Kalsæg; Gustav Pettersson; Anders Puranen; Vikram Rathore; Santeri Saariokari

arXiv · 2510.25438

On Improving Nuclear Fuel Imaging Using Position Sensitive Detectors

Erik Brücken·Peter Andersson·Mihaela Bezak·Peter Dendooven·Sofia Godø·Stefan Holm·Matti Kalliokoski·Aage Kalsæg·Gustav Pettersson·Anders Puranen·Vikram Rathore·Santeri Saariokari

View original source ↗Read source document ↗Export metadata ↓

Abstract

Spent nuclear fuel imaging before disposal is of utmost importance before long term disposal in dedicated storage facilities. Passive Gamma Emission Tomography (PGET) is an approved method by the International Atomic Energy Agency. The present detection system is based on small CZT detectors behind a tungsten-based collimator consisting of a linear array of slits. Small scale CZT crystals limit the detection efficiency of high energetic gamma rays from the fuel rods, mainly the 662 keV emissions from Cs-137. In our study based on full Monte-Carlo simulations as well as on experiments, we explore the capabilities of large pixelated CZT detectors to be used for PGET. We will discuss the theoretical advantages and practical challenges of the larger crystals. We demonstrate that the larger crystals, depending on their orientation, will increase the detection efficiency by a factor of 7 to 13. Due to the pixelated sensor signal readout we also explore the possibility to employ Compton imaging to improve the information on the location of origin of gamma rays. In addition we explore the usefulness of commercial gamma-ray imagers for waste characterisation and decommissioning. In particular we report on the performance of the GeGI imager from PHDS Co and the H420 imager from H3D Inc in measuring nuclear waste drums at Svafo, Sweden.

Explore related subjects

physics.ins-det

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Erik Brücken, Peter Andersson, Mihaela Bezak, Peter Dendooven, Sofia Godø, Stefan Holm, Matti Kalliokoski, Aage Kalsæg, Gustav Pettersson, Anders Puranen, Vikram Rathore, Santeri Saariokari. 2025-10-29. On Improving Nuclear Fuel Imaging Using Position Sensitive Detectors. https://arxiv.org/abs/2510.25438

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det↗

arXiv2026

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det↗

arXiv2026

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det↗