Search arXivSearch

arXiv · 2510.27502

Evaluation of Reference Equations of State for Density Prediction in Regasified LNG Mixtures Using High-Precision Experimental Data

Abstract

This study evaluates the performance of three reference equations of state (EoS), AGA8-DC92, GERG-2008, and SGERG-88, in predicting the density of regasified liquefied natural gas (RLNG) mixtures. A synthetic nine-component RLNG mixture was gravimetrically prepared. High-precision density measurements were obtained using a single-sinker magnetic suspension densimeter over a temperature range of (250 to 350) K and pressures up to 20 MPa. The experimental data were compared with EoS predictions to evaluate their accuracy. AGA8-DC92 and GERG-2008 showed excellent agreement with the experimental data, with deviations within their stated uncertainty. In contrast, SGERG-88 exhibited significantly larger deviations for this RLNG mixture, particularly at low temperatures of (250 to 260) K, where discrepancies reached up to 3 %. Even at 300 K, deviations larger than 0.4 % were observed at high pressures, within the model's uncertainty, but notably higher than those of the other two EoSs. The analysis was extended to three conventional 11-component natural gas mixtures (labeled G420 NG, G431 NG, and G432 NG), previously studied by our group using the same methodology. While SGERG-88 showed reduced accuracy for the RLNG mixture, it performed reasonably well for these three mixtures, despite two of them have a very similar composition to the RLNG. This discrepancy is attributed to the lower CO2 and N2 content typical in RLNG mixtures, demonstrating the sensitivity of EoS performance to minor differences in composition. These findings highlight the importance of selecting appropriate EoS models for accurate density prediction in RLNG applications.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Daniel Lozano-Martín, Dirk Tuma, César R. Chamorro. 2025-10-31. Evaluation of Reference Equations of State for Density Prediction in Regasified LNG Mixtures Using High-Precision Experimental Data. https://doi.org/10.1007/s10765-025-03669-4

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Intrinsic Matching Frustration in Fluctuating Finite Systems

We formulate intrinsic matching frustration (IMF), a fluctuation-induced, kinetics-independent reduction in the mean capacity permitted by a prescribed matching rule. For complementary one-to-one matching, the instantaneous capacity is set by the minority population, so fluctuations produce a nonzero mean deficit even when the two populations are balanced on average. At finite size, this deficit depends on the full distribution of the population difference and is determined by its variance alone only in the Gaussian limit. Compartmentalization hides matching capacity by preventing cancellation between local imbalances of opposite sign. Fusion releases this hidden capacity monotonically under coarse graining, producing a measurable recovery of product yield following local reaction to completion.

physics.chem-ph

Phonon chirality as an additive control of CISS: a symmetry-protected law

Chirality-induced spin selectivity (CISS) is usually associated with molecular handedness. The possible contribution of chiral phonons is less established. We study a helical tight-binding model in which local phonon angular momentum modulates spin-dependent nearest-neighbor hopping. Fewest-switches surface hopping calculations give the transmitted spin polarization $\mathrm{SP}=aC+b\mathrm{PH}$. Here $C$ is the molecular chirality and $\mathrm{PH}$ is the phonon chirality. A mirror symmetry reverses $C$, $\mathrm{PH}$, and $\mathrm{SP}$ simultaneously. This symmetry excludes both a chirality-independent offset and a $C\cdot\mathrm{PH}$ term. The phonon contribution can therefore enhance, cancel, or reverse the molecular CISS signal.

physics.chem-ph

A fast physics-based matrix model for the impedance of a PEM fuel cell: Incorporating functionally graded catalyst layer and channel impedances

We extend a recent physics-based matrix model for calculating PEM fuel cell impedance (doi:10.1149/2754-2734/ad6ce8) to cases of low air flow stoichiometry and functionally graded cathode catalyst layers (CCLs). We demonstrate that the matrix model produces accurate spectra and is almost three orders of magnitude faster than a model based on the standard boundary-value problem solver. The physics-based matrix model can compete with equivalent circuit models for fitting experimental EIS spectra, particularly those measured from cells with functionally graded CCL.

physics.chem-ph