Search arXivSearch

arXiv · 2511.13171

Multi-UE Identification and Localization in LAWN via an Autonomous Non-Serving UAV

Abstract

This paper presents an autonomous sensing framework for identifying and localizing multiple User Equipments (UEs) in Fifth Generation (5G) cellular networks using a non-serving Unmanned Aerial Vehicle (UAV). A complete onboard processing chain is developed to perform synchronization, multi-UE identification, and localization directly from standard 3GPP-compliant uplink Sounding Reference Signals (SRS). Unlike conventional UAV-assisted approaches relying on serving nodes or infrastructure support, the proposed platform operates as a passive sensing UAV, requiring only limited initial coordination with the network and no mission-time control-plane interaction. The approach exploits the structured and periodic nature of SRS transmissions together with a tailored protocol configuration to ensure robust operation under realistic multi-UE interference. The system operates with narrowband SRS (1.4 MHz), reducing UE power consumption and hardware complexity while enabling high multiplexing through cyclic shifts and frequency resources. Reliable synchronization and multi-UE identification are achieved even when multiple UEs share the same resources. The UAV autonomously collects measurements along its trajectory and estimates UE positions using a trajectory-based localization strategy. The proposed framework is validated through extensive simulations and a full-scale experimental campaign, achieving localization errors below 8 m in urban scenarios and below 3 m in rural conditions, outperforming state-of-the-art Angle of Arrival (AoA)- and Time Difference of Arrival (TDoA)-based methods by about 5-6 m. These results demonstrate the feasibility of infrastructure-independent sensing UAVs for Low-Altitude Wireless Networks (LAWN), enabling scalable and rapidly deployable situational awareness in emergency and connectivity-limited environments.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Niccolò Paglierani, Francesco Linsalata, Vineeth Teeda, Davide Scazzoli, Maurizio Magarini. 2026-07-10. Multi-UE Identification and Localization in LAWN via an Autonomous Non-Serving UAV. https://arxiv.org/abs/2511.13171

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Circulant ADMM-Net for Fast High-resolution DoA Estimation

This paper introduces CADMM-Net and CHADMM-Net, two deep neural networks for direction of arrival estimation within the least-absolute shrinkage and selection operator (LASSO) framework. These two networks are based on a structured deep unfolding of the alternating direction method of multipliers (ADMM) algorithm through the use of circulant as well as Hermitian-circulant matrices. Along with a computational complexity of $\mathcal{O}(N\log(N))$ per layer for the inference, where $N$ is the length of the dictionary $\mathbf{A}$, they additionally exhibit a memory footprint of $N$ and approximately half of $N$ for CADMMNet and CHADMM-Net, respectively, compared with $N^{2}$ for ADMM-Net. Furthermore, these structured networks exhibit a competitive performance against ADMM-Net, LISTA, TLISTA, and THLISTA with respect to the detection rate, the angular root-mean square error, and the normalized mean squared error.

eess.SP

BASIIS: Bistatic Angular Sampling and Interpolation for ISAC Setups

Integrated Sensing and Communications (ISAC) is a defining feature of 6G, extending cellular networks with radar-like sensing at limited additional overhead. In bistatic deployments, sensing requires coordinating the transmitter (TX) and receiver (RX) arrays to scan the Cartesian product of angle of departure and arrival, resulting in a four-dimensional sampling problem in the angular domain. This work establishes a complete angular sampling framework for bistatic ISAC, extending the DFT-based optimal-sampling methodology to the full azimuth and elevation domains of both arrays. We show that the bistatic geometry couples the TX and RX elevation angles, and represent this coupling through the ortho-baseline coarray, a virtual array that captures the joint elevation aperture of the array pair. From the coarray we derive a minimal sampling and interpolation scheme, near-lossless and realizable with any beamforming architecture. Monte Carlo simulations confirm the proposed minimal acquisition essentially equalizes the detection accuracy of dense oversampled imaging while acquiring 3 to 5 times fewer TX-RX direction pairs. This allows having bistatic operations with drastically reduced overhead on the radio resource usage of ISAC systems.

eess.SP

Centroid Angle Estimation of Multiple Scatterers Using Monopulse Radar with Frequency Diversity

The monopulse technique determines the angle of a target by comparing signals from two narrow beams, yielding a precise angular estimate with low complexity. However, it struggles to resolve multiple closely spaced scatterers within the same resolution cell. Existing methods for estimating multiple scatterer angles involve complex signal processing and system modifications. We propose an effective method to estimate the angular centroid of scatterers using the mode of monopulse angle estimates. A semi-analytic expression for the angle estimate distribution is derived, confirming that its mode aligns with the centroid. To enhance estimation accuracy, we employ frequency diversity to reduce sample correlation. Numerical results validate the advantages of the proposed method, demonstrating superior performance over conventional techniques with low complexity.

eess.SP