Search arXivSearch

arXiv · 2512.01683

A Modified Boost Converter Topology for Dynamic Characterization of Hot Carrier and Trap Generation in GaN HEMTs

Abstract

Modern microelectronic systems require long term operational stability, necessitating precise reliability models to predict device lifecycles and identify governing failure mechanisms. This is particularly critical for high power GaN High-Electron-Mobility Transistors (HEMTs), where reliability research has historically trailed behind low power digital counterparts. This study introduces a novel application of a modified boost converter circuit designed to investigate GaN failure mechanisms, specifically targeting the determination of reliability factors for the MTOL model. By utilizing a high duty cycle, the circuit stresses the device at maximum rated voltages and currents with minimal input requirements, accelerating hot carrier and trap generation without immediate detrimental failure. Experimental validation was conducted using an EPC 2038 GaN transistor under a constant drain current of 400 mA and a duty cycle of 0.7. The results confirmed that the increase in Drain-Source on-resistance ($R_{DS(on)}$) follows a logarithmic trend over time, consistent with the EPC Phase 12 reliability model. While initial tests at 40V did not successfully validate the longitudinal optical phonon scattering energy ($\hbarω_{LO}$), but were reasonably acceptable, subsequent stress tests at 70V and 100V yielded $\hbarω_{LO}$ values that were successfully validated against existing theoretical and experimental data. This methodology provides a robust framework for predicting performance and lifetime across varying operational parameters in modern power electronics.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Moshe Azoulay, Gilad Orr, Gady Golan. 2026-04-11. A Modified Boost Converter Topology for Dynamic Characterization of Hot Carrier and Trap Generation in GaN HEMTs. https://arxiv.org/abs/2512.01683

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Constrained Feedback Control of Nonlinear Systems via Approximate HJB and Control Barrier Functions

This paper presents a two-stage framework for constrained feedback control of input-affine nonlinear systems. Offline, an approximate value function for the unconstrained problem is computed, for example using Hamilton--Jacobi--Bellman (HJB)-based policy iteration. Online, the proposed quadratic program (QP) minimizes the pre-Hamiltonian evaluated using the approximate value-function gradient subject to safety constraints enforced by control barrier functions (CBFs). This architecture decouples performance optimization from constraint enforcement, allowing constraints to be modified without recomputing the value function. As in CBF-QP architectures based on control Lyapunov functions (CLFs), safety is enforced as a hard constraint; however, the performance objective targets approximate optimality rather than a prescribed Lyapunov decay. Numerical results on a linear 2-state hovercraft and a nonlinear 9-state spacecraft attitude-control problem show agreement with the constrained open-loop optimal control problem (OCP) benchmark in the linear case, and performance close to the OCP benchmark, improving on CLF-based controllers, in the nonlinear case.

eess.SY

Rao-Blackwellized Stein Gradient Descent for Joint State-Parameter Estimation

We present a filtering framework for online joint state estimation and parameter identification in nonlinear, time-varying systems. The algorithm uses a Rao-Blackwellization technique to infer joint state-parameter posteriors efficiently. In particular, conditional state distributions are computed analytically via Kalman filtering, while model parameters, including the measurement-noise covariance, are approximated using particle-based Stein Variational Gradient Descent (SVGD), enabling stable real-time inference. To handle parameters subject to physical constraints, we further introduce constrained variants that enforce them through an alternating direction method of multipliers (ADMM) splitting of the SVGD update, including nonlinear equality constraints that standard particle filters cannot readily handle. We derive a stability bound that relates the approximation error in the parameter posterior to the resulting error in the marginal state distribution. Performance of the proposed filters is validated on three case studies: a fed-batch bioreactor with Haldane kinetics and a damped pendulum, both under physical constraints, and a neural-network-augmented dynamic system. The examples cover parameter estimation under inequality and equality constraints and online neural-network training within a dynamical model.

eess.SY

Firing Rate Neural Network Implementations of Model Predictive Control

Human and animal brains perform planning to enable complex movements and behaviors, a process that can be effectively described using model predictive control (MPC). How could the brain physically implement MPC? In this work, we translate model predictive controllers into firing rate neural networks, offering insights into the nonlinear neural dynamics that underpin planning. We propose a constructive method; no training is required. This is done first applying the projected gradient method to the dual problem to derive a baseline neural network implementation. We then use factorization and contraction analysis to systematically generate alternative network architectures; in other words, we systematically generate hypotheses for how planning is done in the brain via neural dynamics. Finally, we present numerical simulations to study different neural networks performing MPC to balance an inverted pendulum on a cart (i.e., balancing a stick on a hand), including one example in which imposing sparse connectivity (a property observed in brain networks) does not degrade control performance.

eess.SY