Search arXivSearch

arXiv · 2512.05986

Detuning-insensitive wide-field imaging of vector microwave fields with diamond sensors

Abstract

Nitrogen vacancy (NV) centers in diamond have precipitated profound advances in microwave detection, manifesting themselves both in spatial resolution and sensitivity. However, typical methods based on Rabi oscillations are subject to detunings due to thermal and magnetic fluctuations and/or gradients, which introduce systematic errors and render the measurements susceptible to environmental perturbations. Here, we propose and demonstrate a novel approach for determining both the magnitude and direction of microwaves, by exploiting the spectral line broadening effect in the optically detected magnetic resonance of NV centers. This method eliminates the requirement of aligning the MW frequency to the spin transitions and is therefore immune to variations and inhomogeneities of the magnetic field and temperature, providing an optimal tool for fast imaging applications. With this method, we achieved wide-field imaging of near field microwaves generated with a microscale $\rmΩ$-pattern antenna with a resolution of 800\,nm. Combining with the vector detection using multi-axis NVs, a full reconstruction of the vector microwave fields is obtained. Besides, our scheme also exhibits excellent linearity over a broad range of MW amplitudes, and the scale is theoretically calculated to be more than four orders. Our results augment the applicability of diamond-based microwave devices in applications under complex scenarios, especially where large dynamic range, fast test speed, and high spatial resolution are demanded.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Xiu-Qi Chen, Rui-Zhi Zhang, Gang-Qin Liu, Huijie Zheng. 2025-11-28. Detuning-insensitive wide-field imaging of vector microwave fields with diamond sensors. https://arxiv.org/abs/2512.05986

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det

Characterization of immersed SiPM arrays in liquid scintillator between room temperature and $-30\,^{\circ}\mathrm{C}$

Liquid scintillator detectors instrumented with distributed silicon photomultiplier (SiPM) arrays can be used in compact, topology-sensitive, and low-background experiments, but the temperature dependence of SiPMs immersed directly in the scintillation medium has not been widely characterized. We report the operation of a 125-liter linear-alkylbenzene-based liquid scintillator detector read out by 125 SiPM channels immersed in the active volume, over the range from room temperature to $-30\,^{\circ}\mathrm{C}$. The detector response was measured with cosmic-ray muons, including stopping muons followed by their Michel-electron decay. Cooling from $+15\,^{\circ}\mathrm{C}$ to $-30\,^{\circ}\mathrm{C}$ reduced the SiPM dark-count rate by a factor of 13.5, increased the single-photoelectron response by 49.1%, and increased the cosmic-ray muon light yield by 16.7%. The improved photoelectron separation and baseline stability at low temperature enabled a selection of stopping-muon events, from which the effective muon lifetime was measured to be $1959\pm132\,\mathrm{ns}$, consistent with the value expected for a hydrocarbon scintillator once $μ^{-}$ capture on carbon is taken into account.

physics.ins-det