Search arXivSearch

arXiv · 2512.09837

Comparison of time-resolved photoluminescence and deep-level transient spectroscopy defect evaluations in an InAs nBn detector subjected to in-situ and ex-situ 63 MeV proton irradiation

Abstract

Deep-level transient spectroscopy and temperature-dependent time-resolved photoluminescence experiments are performed on identical InAs nBn photodetector structures as a function of in-situ and ex-situ 63 MeV proton irradiation to assess their generation and recombination dynamics. Pre-irradiation, the n-type InAs absorbing region exhibits a steadily increasing minority carrier lifetime with increasing temperature, providing evidence that excited minority carriers may be recombining via shallow defect levels. From deep-level transient spectroscopy, two features are found between 10 K and 275 K: a low temperature broad shoulder, which suggests emission from multiple shallow electron defect levels with energies < 29 meV, and a high temperature minimum occurring at approximately 230 K with an activation energy of 539 meV, which suggests a defect in the barrier layer in the device. Two similar nBn detectors are then subjected to 63 MeV proton irradiation in step doses and measured between steps. One experiment is performed in-situ with an nBn held at approximately 10 K during dosing, and the other experiment is performed ex-situ with a similar nBn held at room temperature for dosing. The ex-situ dosing results in an evaluation of the defect introduction rate that is three to four times lower than in-situ due to partial annealing of the proton-induced displacement damage at room temperature. The results for these two experiments are then compared with the dose-dependent recombination rate analysis, resulting in an estimated recombination defect cross-section of 1.6x10^(-13) cm^2 for the shallow shoulder defect.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Rigo A. Carrasco, Christopher P. Hains, Nathan Gajowski, Alexander T. Newell, Julie V. Logan, Zinah M. Alsaad, Preston T. Webster, Christian P. Morath, Diana Maestas, Aaron J. Muhowski, Samuel D. Hawkins, Evan M. Anderson. 2026-02-04. Comparison of time-resolved photoluminescence and deep-level transient spectroscopy defect evaluations in an InAs nBn detector subjected to in-situ and ex-situ 63 MeV proton irradiation. https://doi.org/10.1063/5.0315922

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Pendellösung length-scale neutron and X-ray interferometry

Neutron and X-ray perfect-crystal interferometers (PCIs) are powerful platforms for studies of fundamental physics and phase-contrast imaging. Further enhancing several PCI capabilities requires reducing crystal blade thickness to the micron scale, which minimizes dynamical-diffraction image blur, permits operation in the pendellösung regime where blade thickness controls beam splitting, and reduces absorption for simultaneous neutron and X-ray operation. However, fabricating multiple crystal blades with identical micrometer-scale thicknesses over centimeter-scale areas remains a major challenge. Here, using a non-etching sub-micron fabrication technique, we demonstrate silicon triple-Laue interferometers with equal-blade-thicknesses of 110 $μ$m and 350 $μ$m, operated with both neutrons and X-rays. These devices are the thinnest PCIs realized to date, enabling a factor-of-six reduction in dynamical-diffraction beam spreading for improved phase-contrast imaging, while reaching the single pendellösung length regime in which crystal thickness provides an experimentally accessible control parameter for engineered quantum-optical beam splitting of plane-wave inputs. These results motivate multi-blade PCI designs utilizing identical half-pendellösung crystal lamellae that are proposed for neutron spin--orbit and electric dipole moment measurements.

physics.app-ph

A State-Space Framework for trivial and Topological Metamaterial Stochastic Analysis

Topological phononic crystals and elastic metamaterials support edge states defined by global topological invariants, offering a route toward vibration-control and wave-guiding devices that remain functional in the presence of defects. However, manufacturing-induced spatial variability can perturb these invariants and compromise their robustness, making its quantification essential during design. In this work, we first demonstrate that a previously proposed linear time-varying (LTV) formulation is mathematically equivalent to the spectral element method based on transfer matrices for elementary rod, Saint-Venant shaft, and Euler-Bernoulli beam theories. The deterministic formulation is then extended to stochastic analyses through a stochastic linear time-varying (SLTV) framework. The proposed methodology combines Monte Carlo simulations with stochastic Fourier series and an analytical Karhunen--Loève expansion, providing closed-form stochastic fields and their derivatives required by the LTV formulation. The SLTV approach enables the computation of stochastic dispersion diagrams and forced responses of one-dimensional waveguides with arbitrarily varying geometry and mechanical properties. Because the LTV-based transition matrix isolates individual wavemodes without requiring the mode tracking needed by conventional eigenproblem-based formulations, the framework is particularly suited for evaluating topological invariants, specifically the Zak phase, and assessing the robustness of topological bands under spatial variability. Numerical results for rods, shafts, and Euler-Bernoulli beams demonstrate the applicability of the proposed framework as a unified methodology for deterministic and stochastic analyses of trivial and topological periodic waveguides under continuous spatial uncertainty.

physics.app-ph

Low-loss phononic integrated circuits based on a silicon nitride-lithium niobate platform

Microwave-frequency acoustic waves in solids have emerged as a versatile platform for both classical and quantum applications. While phononic integrated devices and circuits are being developed on various material platforms, an ideal phononic integrated circuit (PnIC) platform should simultaneously support low-loss waveguide structures, high-quality-factor resonators, high-performance modulators, and efficient electromechanical transducers. Here, we establish a low-loss gigahertz-frequency PnIC platform based on patterned thin-film silicon nitride (SiN) on lithium niobate (LN) substrate. We develop low-loss PnIC building blocks including waveguides, directional couplers, and high-quality-factor (high-Q) ring resonators. As an application, we demonstrate a 1-GHz phononic oscillator based on a ring resonator, reaching a low phase noise of -159.0 dBc/Hz at a 100-kHz offset frequency. Our low-loss PnICs could meet the requirements in microwave acoustics, quantum phononics, and integrated hybrid systems combining phonons, photons, superconducting qubits, and solid-state defects.

physics.app-ph