Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2512.17876

Impact of Heater Thermal Properties on Nucleate Pool Boiling: Insights from a Multiscale Automata Simulation

Karina I. Mazzitello·T. Molina Blanco·C. P. Marcel·V. P. Masson
View original source ↗Read source document ↗Export metadata ↓

Abstract

This study investigates the influence of heater material properties on nucleate pool boiling using a comprehensive simulation model. Copper and silicon oxide are selected as reference materials due to their properties as excellent and poor heat conductors, respectively. The model integrates well-known heat transfer mechanisms, allowing for the assessment of the effects of these distinct heater materials. The results show that materials with superior thermal diffusivity, such as copper, significantly enhance cooling efficiency during nucleate boiling. Moreover, the study provides insights into the relationship between bubble growth, microlayer recovery beneath a bubble, temperature fluctuations, and heater properties. Comparisons between copper and silicon oxide underscore variations in bubble frequency, attributed to differences in bubble growth time, microlayer recovery time, and material-dependent behavior. The influence of neighboring boiling sites is especially pronounced in silicon oxide due to its low thermal conductivity and diffusivity values. Temperature variations in this material become highly visible due to its very slow response to temperature changes. Simulation results align well with semi-empirical correlations, confirming the model's success in capturing the intricate phenomena of nucleate pool boiling. In summary, the model reveals that changes in the thermal properties of the heater affect not only boiling performance but also key characteristics of the process, including bubble frequency, boiling patterns, regularity, and cavity reactivation speed.

Explore related subjects

cond-mat.soft

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Karina I. Mazzitello, T. Molina Blanco, C. P. Marcel, V. P. Masson. 2025-12-19. Impact of Heater Thermal Properties on Nucleate Pool Boiling: Insights from a Multiscale Automata Simulation. https://arxiv.org/abs/2512.17876

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Transient Elasticity -- A Unifying Framework for Thixotropy, Polymers, and Granular Media

Thixotropic yield stress fluids, such as paint or ketchup, are traditionally viewed as elastic structures that, under shear rates, break into viscous liquids with lumps, and reconnect at rest. An alternative framework is presented here: Upon shear, structural destruction is incomplete, leaving sufficient connections. As a result, elasticity fundamentally underlies their non-Newtonian behavior, though they do appear purely viscous under a steady shear, displaying little direct evidence of elastic rebound---same as granular media and polymers. Consequently, all three are described by the same set of evolution equations, differing only in their parameters. These equations are set up by starting from solid dynamics and allowing the elastic strain $\varepsilon^e$ to relax, which in effect interpolates between solid and fluid behavior, appropriate for systems that display both types of behavior. Incorporating in addition a two-temperature framework, tracking how energy is dissipated in two consecutive stages, yields the nonlinear model of Transient Elasticity (TE). It describes an elasticity that is transient in time yet persistent under shear. Previously validated for polymers and granular media, TE is here applied to thixotropic yield-stress fluids. As shown, it successfully accounts for a wide range of characteristic phenomena, including over- and undershoot, viscosity bifurcation, shear banding, and oscillatory rheography. Given its appropriateness across structurally diverse systems, TE offers a unified, surprisingly general account of non-Newtonian phenomena.

cond-mat.soft↗
arXiv2026

Deformation and organization of droplet-encapsulated soft beads

Many biological, culinary, and engineering processes lead to the co-encapsulation of several soft particles within a liquid interface. In these situations the particles are bound together by the capillary forces that deform them and influence their biological or rheological properties. Here, we introduce an experimental approach to encapsulate a controlled number of soft beads within aqueous droplets in oil. These droplet-encapsulated gels are manipulated in a deformable microfluidic device to merge them and modify the liquid fraction. In the dry limit the contact surface between the hydrogels is found to be determined by the elastocapillary number $E_c$, with the contact radius following a $E_c^{1/3}$ dependence, indicating that the deformation increases for soft or small particles. When multiple beads are co-encapsulated within a single droplet they can be arranged into linear or three-dimensional aggregates that remain at a local energy minimum.

cond-mat.soft↗
arXiv2026

Flexoelectricity-driven softening of bend elasticity leads to spontaneous chiral symmetry breaking in a polar fluid

The origin of the recently observed spontaneous chiral symmetry breaking in polar fluids composed of achiral molecules is an unsolved problem, raising fundamental questions about how heliconical structures emerge in such systems. Here, we investigate the pretransitional fluctuations leading to the formation of the spontaneously chiral twist-bend ferroelectric nematic phase using dielectric spectroscopy, light scattering, and small-angle X-ray scattering. We observe simultaneous softening of the bend elastic constant and the emergence of a collective dielectric mode on approaching the transition. By developing a theoretical model, we show that these phenomena are signatures of a flexoelectricity-driven transition arising from the coupling between electric polarization and bend deformation.

cond-mat.soft↗