A General Purpose Method for Robotic Interception of Non-Cooperative Dynamic Targets

Tanmay P. Patel; Erica L. Tevere; Erik H. Kramer; Rudranarayan M. Mukherjee

Home/Archive/arXiv

arXiv · 2512.20769

A General Purpose Method for Robotic Interception of Non-Cooperative Dynamic Targets

Tanmay P. Patel·Erica L. Tevere·Erik H. Kramer·Rudranarayan M. Mukherjee

View original source ↗Read source document ↗Export metadata ↓

Abstract

This paper presents a general purpose framework for autonomous, vision-based interception of dynamic, non-cooperative targets, validated across three distinct mobility platforms: an unmanned aerial vehicle (UAV), a four-wheeled ground rover, and an air-thruster spacecraft testbed. The approach relies solely on a monocular camera with fiducials for target tracking and operates entirely in the local observer frame without the need for global information. The core contribution of this work is a streamlined and general approach to autonomous interception that can be adapted across robots with varying dynamics, as well as our comprehensive study of the robot interception problem across heterogenous mobility systems under limited observability and no global localization. Our method integrates (1) an Extended Kalman Filter for relative pose estimation amid intermittent measurements, (2) a history-conditioned motion predictor for dynamic target trajectory propagation, and (3) a receding-horizon planner solving a constrained convex program in real time to ensure time-efficient and kinematically feasible interception paths. Our operating regime assumes that observability is restricted by partial fields of view, sensor dropouts, and target occlusions. Experiments are performed in these conditions and include autonomous UAV landing on dynamic targets, rover rendezvous and leader-follower tasks, and spacecraft proximity operations. Results from simulated and physical experiments demonstrate robust performance with low interception errors (both during station-keeping and upon scenario completion), high success rates under deterministic and stochastic target motion profiles, and real-time execution on embedded processors such as the Jetson Orin, VOXL2, and Raspberry Pi 5. These results highlight the framework's generalizability, robustness, and computational efficiency.

Explore related subjects

cs.RO

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Tanmay P. Patel, Erica L. Tevere, Erik H. Kramer, Rudranarayan M. Mukherjee. 2025-12-23. A General Purpose Method for Robotic Interception of Non-Cooperative Dynamic Targets. https://arxiv.org/abs/2512.20769

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Highly-Efficient Differentiable Simulation for Robotics

Robotics simulators have improved significantly in computational speed and scalability, enabling them to generate years of simulated data for complex systems in minutes or hours. Despite these advances, efficiently and accurately computing simulation derivatives remains an open challenge. Addressing this would accelerate the convergence of reinforcement learning and trajectory optimization algorithms, particularly for contact-rich problems. This paper introduces a unifying framework for robotic simulation that accounts for all factors, including dynamics, collisions, and friction. The resulting algorithm computes analytical derivatives of the simulation by implicit differentiation, explicitly handling the intrinsic non-smoothness of the collision and frictional stages while exploiting the sparsity induced by the multi-body structure. Benchmark results demonstrate state-of-the-art performance, with timings ranging from $5\,μ$s for a 7-dof manipulator to $95\,μ$s for a 36-dof humanoid, an improvement of at least two orders of magnitude over alternative methods. Implemented in C++, the code will be open-sourced after the review process to support applications such as simulation-driven learning and real-time control.

cs.RO↗

arXiv2026

GeCCo -- a Generalist Contact-Conditioned Policy for Loco-Manipulation Skills on Legged Robots

Most modern approaches to quadruped locomotion focus on using Deep Reinforcement Learning (DRL) to learn policies from scratch, in an end-to-end manner. Such methods often fail to scale, as every new problem or application requires time-consuming and iterative reward definition and tuning. We present Generalist Contact-Conditioned Policy (GeCCo) --- a low-level policy trained with Deep Reinforcement Learning that is capable of tracking arbitrary contact points with a quadruped robot. We shift from task-specific end-to-end learning to a modular hierarchy in which a single planner-agnostic, contact-conditioned tracking policy serves as a robust interface between planning and control. By maintaining stable contact execution under dynamic uncertainty and planner mismatch, the policy enables high-level planners (e.g., handcrafted, learned, or optimization-based) to be composed and swapped without retraining. We demonstrate the scalability and robustness of our method by evaluating on a wide range of locomotion and manipulation tasks in a common framework and under a single generalist policy. These include a variety of gaits, traversing complex terrains (e.g., stairs and slopes) as well as previously unseen stepping-stones and narrow beams, and interacting with objects (e.g., pressing a button, pushing a barrel). Our framework acquires new behaviors more efficiently, simply by combining a task-specific high-level contact planner and the pre-trained generalist policy. Project website: https://vassil-atn.github.io/gecco.github.io

cs.RO↗

arXiv2026

ERUPT: An Open Toolkit for Interfacing with Robot Motion Planners in Extended Reality

We present the Extended Reality Universal Planning Toolkit (ERUPT), an extended reality (XR) system for interactive motion planning. This paper serves to introduce our open-source system to others who can use it as a base to develop immersive robot interaction applications. Our system allows users to create and dynamically reconfigure environments while they plan robot paths. ERUPT uses XR to provide a broad range of natural interaction capabilities, allowing users to grab and adjust objects in the environment similar to interaction in the real world, rather than using a mouse and keyboard with the scene projected onto a 2D computer screen. Our system integrates with MoveIt, a manipulation planning framework, allowing users to send motion planning requests and visualize the resulting robot paths in virtual or augmented reality. We provide a broad range of interaction modalities, allowing users to modify objects in the environment and interact with a virtual robot. Our system allows operators to visualize robot motions, ensuring desired behavior as it moves throughout the environment, without risk of collisions within a virtual space, and to then deploy planned paths on physical robots in the real world. Code can be found at https://github.com/parasollab/erupt.

cs.RO↗