Search arXivSearch

arXiv · 2601.11137

Scale-resolving simulations and data-driven modal analysis of turbulent transonic buffet cells on infinite swept wings

Abstract

Transonic buffet is a class of shock-wave/boundary-layer interaction known to exhibit self-sustained two-dimensional (2D) chordwise shock wave oscillations (Strouhal number St=0.05-0.1), and three-dimensional (3D) spanwise-modulated flow separation/reattachment (St=0.2-0.4). Due to computational cost, scale-resolving simulations of span-periodic configurations to date have been limited to narrow airfoils, insufficient to accommodate the 3D buffet cell instability reported in low-fidelity simulations and experiments. In this work, implicit large-eddy simulations (ILES) and modal analysis are performed on infinite swept wings up to AR=3. The sensitivity of the 2D and 3D modes to crossflow is detailed. Two flow conditions are examined, corresponding to minimally and largely separated mean flow at the shock location. For the minimally separated case, the shock dynamics remain essentially spanwise-uniform (quasi-2D), with only weak and intermittent separation cells confined to the trailing-edge region and exhibiting negligible interaction with the shock. In contrast, increased mean separation leads to the emergence of pronounced 3D buffet cells with a characteristic spanwise wavelength: 1-1.5c. SPOD reveals that a quasi-stationary low-frequency 3D separation mode previously identified on unswept wings (St=0.02) becomes a spanwise travelling mode as sweep is imposed, shifting monotonically to intermediate frequencies (St=0.06-0.35). The 2D shock mode is largely insensitive to sweep, whereas the frequency and energy content of the 3D mode increase with sweep while its wavelength remains unchanged. The results demonstrate that transonic buffet on infinite wings arises from the superposition of distinct but coexisting 2D shock motion and separation-driven 3D instabilities, with mean flow separation at the shock identified as a necessary condition for dominant 3D buffet dynamics to emerge.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

David J. Lusher, Andrea Sansica. 2026-04-08. Scale-resolving simulations and data-driven modal analysis of turbulent transonic buffet cells on infinite swept wings. https://doi.org/10.1103/bn2n-4bxm

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Cross-helicity and chaotic dynamics of full-disc solar magnetic field

Using the results of laboratory experiments and direct numerical simulations, as well as observations of the full-disc solar magnetic field and sunspot number dynamics, it is demonstrated that cross-helicity can dominate the decaying part of the frequency power spectra of the magnetic field generated by a magnetohydrodynamic (MHD) dynamo in chaotic/turbulent swirling flows for sufficiently strong MHD turbulence (including the solar dynamo). The theoretical consideration is based on a Kolmogorov-like phenomenology within the framework of the distributed chaos concept. It is also shown that the solar full-disc magnetic field for the last two solar cycles with weak magnetic activity exhibits deterministic chaotic behavior concentrated around the equator.

physics.flu-dyn

Manifestation of spurious currents and interface regularization in wind turbulence over fast-propagating waves

Accurate simulation of wind turbulence over fast-propagating waves requires interface-capturing methods that suppress numerical artifacts while accurately resolving momentum transfer across the interface. In high wave-age regimes, numerical errors at the air-water interface can reach magnitudes comparable to the physical flow, directly affecting predicted turbulence statistics. This study examines widely used interface-capturing techniques to evaluate how curvature estimation and flux discretization influence wind-wave simulations through the resulting spurious currents and interface regularization. A systematic assessment is performed using static and translating droplet benchmarks, together with solitary and monochromatic wave cases, to identify and quantify the dominant numerical error mechanisms. In addition, comparison with experimental measurements reveals how these primary error sources manifest in coupled wind-wave simulations. These findings clarify the numerical origin of the observed discrepancies and underscore the importance of accurate curvature and flux treatment in high wave-age regimes, without which numerical artifacts risk being misattributed to genuine wind-wave physics.

physics.flu-dyn

A reconfigurable multi-axis cyber-physical framework for multi-regime fluid--structure interaction experiments

Fluid--structure interaction (FSI) experiments are typically built around mechanical dynamics and constraints imposed by the physical apparatus, so changing mass, stiffness, damping, or allowable motion often requires hardware reconfiguration. Here we present a reconfigurable cyber-physical framework in which these properties are instead assigned through software-defined dynamics. The system provides three translational and one rotational degree of freedom, each independently configurable as prescribed, load-responsive, or locked, with operating roles that can also be reassigned during a running experiment. Measured forces and torques are incorporated into real-time virtual dynamic models, while a common supervisory architecture coordinates multi-axis motion, mode switching, synchronized data acquisition, and diagnostic positioning. The prescribed-motion pathway is validated using a pitching hydrofoil by comparison with published thrust and power scaling trends, while the load-responsive pathway is evaluated using an active-heave/passive-pitch benchmark that reproduces the expected frequency-dependent resonant response over the tested conditions. The same platform is then reconfigured for intra-cycle active--passive pitching, coordinated vertical-axis turbine-surrogate motion, force-driven passive surge, and automated multilayer stereoscopic particle image velocimetry. These results demonstrate that distinct FSI boundary conditions and measurement requirements can be implemented within a common motion, sensing, and control architecture. By treating mechanical roles and constraints as software-defined experimental variables, the framework provides a reusable basis for reconfigurable FSI experiments without redesigning the underlying platform for each application.

physics.flu-dyn