Meta-Adaptive Beam Search Planning for Transformer-Based Reinforcement Learning Control of UAVs with Overhead Manipulators under Flight Disturbances

Hazim Alzorgan; Sayed Pedram Haeri Boroujeni; Abolfazl Razi

Home/Archive/arXiv

arXiv · 2603.26612

Meta-Adaptive Beam Search Planning for Transformer-Based Reinforcement Learning Control of UAVs with Overhead Manipulators under Flight Disturbances

Hazim Alzorgan·Sayed Pedram Haeri Boroujeni·Abolfazl Razi

View original source ↗Read source document ↗Export metadata ↓

Abstract

Drones equipped with overhead manipulators offer unique capabilities for inspection, maintenance, and contact-based interaction. However, the motion of the drone and its manipulator is tightly linked, and even small attitude changes caused by wind or control imperfections shift the end-effector away from its intended path. This coupling makes reliable tracking difficult and also limits the direct use of learning-based arm controllers that were originally designed for fixed-base robots. These effects appear consistently in our tests whenever the UAV body experiences drift or rapid attitude corrections. To address this behavior, we develop a reinforcement-learning (RL) framework with a transformer-based double deep Q learning (DDQN), with the core idea of using an adaptive beam-search planner that applies a short-horizon beam search over candidate control sequences using the learned critic as the forward estimator. This allows the controller to anticipate the end-effector's motion through simulated rollouts rather than executing those actions directly on the actual model, realizing a software-in-the-loop (SITL) approach. The lookahead relies on value estimates from a Transformer critic that processes short sequences of states, while a DDQN backbone provides the one-step targets needed to keep the learning process stable. Evaluated on a 3-DoF aerial manipulator under identical training conditions, the proposed meta-adaptive planner shows the strongest overall performance with a 10.2% reward increase, a substantial reduction in mean tracking error (from about 6% to 3%), and a 29.6% improvement in the combined reward-error metric relative to the DDQN baseline. Our method exhibits elevated stability in tracking target tip trajectory (by maintaining 5 cm tracking error) when the drone base exhibits drifts due to external disturbances, as opposed to the fixed-beam and Transformer-only variants.

Explore related subjects

cs.RO

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Hazim Alzorgan, Sayed Pedram Haeri Boroujeni, Abolfazl Razi. 2026-05-29. Meta-Adaptive Beam Search Planning for Transformer-Based Reinforcement Learning Control of UAVs with Overhead Manipulators under Flight Disturbances. https://arxiv.org/abs/2603.26612

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

J-PARSE: Jacobian-based Projection Algorithm for Resolving Singularities Effectively in Inverse Kinematic Control of Serial Manipulators

J-PARSE is an algorithm for smooth first-order inverse kinematic control of a serial manipulator near kinematic singularities. The commanded end-effector velocity is interpreted component-wise, according to the available mobility in each dimension of the task space. First, a substitute ''Safety'' Jacobian matrix is created, keeping the aspect ratio of the manipulability ellipsoid above a threshold value. The desired velocity is then projected onto non-singular and singular directions, and the latter projection scaled down by a factor informed by the altered mobility. A right-inverse of the non-singular Safety Jacobian is applied to the modified command. In the absence of joint limits and collisions, this ensures safe transition into and out of low-mobility configurations, guaranteeing locally stable reaching behavior towards target poses within, on the boundary of, and outside the workspace. The behavior is further guaranteed to be locally asymptotically stable if the starting and target configurations are not exactly singular, even if they are nearly singular. Velocity control with J-PARSE is benchmarked against approaches from the literature, illustrating its use of a single tuning parameter to simultaneously achieve high reaching accuracy and stable behavior. Applications in teleoperation, servoing, and learning are demonstrated. Videos and code are available at https://jparse-manip.github.io/.

cs.RO↗

arXiv2026

NeMo-map: Neural Implicit Flow Fields for Spatio-Temporal Motion Mapping

Safe and efficient robot operation in complex human environments can benefit from good models of site-specific motion patterns. Maps of Dynamics (MoDs) provide such models by encoding statistical motion patterns in a map, but existing representations use discrete spatial sampling and typically require costly offline construction. We propose a continuous spatio-temporal MoD representation based on implicit neural functions that directly map coordinates to the parameters of a Semi-Wrapped Gaussian Mixture Model. This removes the need for discretization and imputation for unevenly sampled regions, enabling smooth generalization across both space and time. Evaluated on two public datasets with real-world people tracking data, our method achieves better accuracy of motion representation and smoother velocity distributions in sparse regions while still being computationally efficient, compared to available baselines. The proposed approach demonstrates a powerful and efficient way of modeling complex human motion patterns and high performance in the trajectory prediction downstream task. The code is publicly available at https://github.com/test-bai-cpu/nemo-map.

cs.RO↗

arXiv2026

Spatiotemporal Calibration of Doppler Velocity Logs for Underwater Robots

The calibration of extrinsic parameters and clock offsets between sensors for high-accuracy performance in underwater SLAM systems remains insufficiently explored. Existing methods for Doppler Velocity Log (DVL) calibration are either constrained to specific sensor configurations or rely on oversimplified assumptions, and none jointly estimate translational extrinsics and time offsets. We propose a Unified Iterative Calibration (UIC) framework for general DVL sensor setups, formulated as a Maximum A Posteriori (MAP) estimation with a Gaussian Process (GP) motion prior for high-fidelity motion interpolation. UIC alternates between efficient GP-based motion state updates and gradient-based calibration variable updates, supported by a provably statistically consistent sequential initialization scheme. The proposed UIC can be applied to IMU, cameras and other modalities as co-sensors. We release an open-source DVL-camera calibration toolbox. Beyond underwater applications, several aspects of UIC-such as the integration of GP priors for MAP-based calibration and the design of provably reliable initialization procedures-are broadly applicable to other multi-sensor calibration problems. Finally, simulations and real-world tests validate our approach.

cs.RO↗