Search arXivSearch

arXiv · 2604.19513

Electrically-injected room-temperature waveguide polariton laser

Abstract

Exciton-polariton lasers are coherent light sources which do not require the population inversion (transparency) condition to be fulfilled. They have been conceptualized at the end of the XXth century but until now they operate almost exclusively under optical injection, which severely limits the widespread integration of the polariton-based devices implemented so far. Here we tackle this issue by reporting an electrically-pumped exciton-polariton laser based on GaN and operating at room temperature in a mode-locked regime. The laser architecture is close to the geometry of commercial ridge-waveguide GaN lasers, but based on a bulk GaN active region instead of quantum wells. Unique features of polariton lasers are demonstrated, in particular the breakdown of the transparency condition, which enables our polariton lasers to operate even when only a small fraction (20\%) of the cavity length is injected. Moreover, the large polaritonic gain allows for the operation of a short cavity length (60$μm$) compared to commercial lasers. From the very same sample, we also achieve polariton lasing under optical injection, confirming that the doped layers necessary for electrical injection do not prevent strong-coupling nor polariton lasing. Our results open a new perspective for polariton-based devices.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Hassen Souissi, Valentin Develay, Maksym Gromovyi, Edmond Cambril, Christelle Brimont, Laetitia Doyennette, Guillaume Malpuech, Dmitry Solnyshkov, Blandine Alloing, Sebastien Chenot, Mohamed Al-Khalfioui, Eric Frayssinet, Jean-Yves Duboz, Mingyang Zhang, Jesus-Zuniga Perez, Sophie Bouchoule, Thierry Guillet. 2026-04-21. Electrically-injected room-temperature waveguide polariton laser. https://arxiv.org/abs/2604.19513

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Mid-infrared reconfiguration of population flow in lanthanide nanocrystals

Converting mid-infrared (MIR) radiation to visible or near-infrared wavelengths is essential for imaging and sensing, yet achieving sensitive, low-power, and scalable detection remains challenging. Lanthanide nanocrystals provide an alternative through ratiometric luminescence but are typically constrained by Boltzmann statistics, which tie population distributions to lattice temperature and limit signal contrast. Here we show that MIR irradiation rebalances dissipative relaxation pathways, driving lanthanide emitters into a non-Boltzmann steady state that enables non-thermal control of population distributions. This allows emission behaviors inaccessible under thermal equilibrium. We exploit this regime to achieve linear MIR detection with respect to MIR power across 6.8 to 8.6 micrometers. The ratiometric response is intrinsically independent of the pump power, enabling operation at an ultralow excitation power of 10 uW, several orders of magnitude lower than conventional approaches. Using standard silicon photodetectors, we then demonstrate room-temperature MIR imaging with detection limits approaching 4 nW um-2. Our results establish lanthanide nanoparticles as an efficient platform for MIR conversion and sensing in nanophotonic systems.

physics.optics

Metasurface-integrated VCSEL designed for polarization control in optical Ising machines

The orthogonal polarization states of vertical-cavity surface-emitting lasers (VCSELs) can be used to describe candidate solutions to the Ising Hamiltonian, which is useful for solving quadratic unconstrained binary optimization problems. However, the natural anisotropy of VCSELs tends to overly favor one polarization state, which impedes the system from working as desired. In this work, we have designed and fabricated a metasurface, which may lead to a VCSEL with reduced undesired anisotropy. By changing the geometric size of nano-structures in the metasurface, the polarization state of the output light can be altered. Based on the injection-locking theory and spin-flip model, we numerically show that VCSELs with lowered anisotropy are more easily affected by the injection locking needed in Ising systems. Additionally, we numerically study the evolution of a 3-bit VCSEL-based Ising system and verify that the computational accuracy of the photonic Ising machine can be improved to more than twice that of its counterpart with higher anisotropy.

physics.optics

Topological Optical Frequency Combs

Optical frequency combs (OFCs) are revolutionary light sources characterized by discrete and equally spaced spectral lines, and they have found widespread applications in metrology, spectroscopy, and communications. In the early stages, OFCs were realized using mode-locked lasers. With advancements in the fabrication of high-quality factor ($Q$) microresonators and the increasing demand for miniaturized and integrable photonic chips, microresonator-based OFCs, commonly referred to as microcombs, have been developed. Although early studies of microcombs primarily focused on single microresonators or a few resonators, a significant breakthrough occurred in 2021 when it was theoretically predicted that light propagating in the topological edge channel of an array of ring resonators could generate nested frequency combs known as topological OFCs. Since then, the field of topological OFCs has progressed rapidly, with experimental observations made in 2024. This Perspective will introduce the history of OFCs, placing particular emphasis on the emergence and development of topological OFCs, as well as exploring the research challenges and opportunities associated with them.

physics.optics