Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2605.07311

A Microfabricated PCM-Switched Reconfigurable Intelligent Surface for Wideband Millimeter-Wave Beam Steering

Afsaneh Hojjati-Firoozabadi·Raafat Mansour
View original source ↗Read source document ↗Export metadata ↓

Abstract

This paper presents the design, fabrication, and experimental validation of a reconfigurable intelligent surface (RIS) employing electrically actuated vanadium dioxide (VO2) switches for millimeter wave beam steering. The proposed RIS is realized using a multilayer microfabrication process on an alumina substrate, enabling monolithic integration of hundreds of sub-4 micrometer VO2 switching elements within deeply subwavelength unit cells, approximately one-fifth of the wavelength. The switching-induced modulation of surface impedance is analyzed through full-wave simulations, and the resulting phase and amplitude responses are experimentally characterized using a custom WR-28 waveguide measurement setup. Based on the validated unit-cell design, a 10 x 20 RIS array integrating 200 VO2 switches is fabricated. The switches within each column are serially biased using integrated routing lines, allowing programmable control of the spatial phase distribution across the surface. Synthesized phase profiles enable dynamic beam steering, resulting in measured far-field gain enhancement of 10-20 dB over an 18 percent fractional bandwidth centered at 33 GHz, with steering angles up to 60 degrees. The measured radiation patterns are in good agreement with semi-numerical channel modeling predictions. By combining thin-film PCM switching with an integration-aware unit-cell design, this work demonstrates a scalable RIS architecture that mitigates packaging parasitics and footprint limitations inherent to conventional semiconductor-based implementations, providing a practical pathway toward higher-frequency reconfigurable surfaces.

Explore related subjects

eess.SP

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Afsaneh Hojjati-Firoozabadi, Raafat Mansour. 2026-05-08. A Microfabricated PCM-Switched Reconfigurable Intelligent Surface for Wideband Millimeter-Wave Beam Steering. https://arxiv.org/abs/2605.07311

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Multi-Carrier Rydberg Atomic Quantum Receivers with Enhanced Bandwidth Feature for Communication and Sensing

Rydberg atomic quantum receivers (RAQRs) have attracted significant attention in recent years due to their ultra-high sensitivity. Although capable of precisely detecting the amplitude and phase of weak signals, conventional RAQRs face inherent limitations in accurately receiving wideband RF signals, due to the discrete nature of atomic energy levels and their intrinsic instantaneous bandwidth constraints. These limitations hinder their direct application to multi-carrier communication and sensing. To address this issue, this paper proposes a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) structure with five energy levels. We derive the amplitude and phase of the MC-RAQR and extract the baseband electrical signal for signal processing. In terms of multi-carrier communication and sensing, we analyze the channel capacity and accuracy of angle of arrival (AoA) and distance parameters, respectively. Numerical results validate our proposed model, showing that the MC-RAQR can achieve up to a bandwidth of 11.7 MHz, which is 17-fold larger than the conventional RAQRs. As a result, the channel capacity and the resolution for multi-target sensing are improved significantly. Specifically, the channel capacity of MC-RAQR is 110-fold and 2.8-fold larger than the classical RF receivers and RAQRs, respectively. For sensing performance, the RMSE of AoA estimation for MC-RAQR exhibits 7.6-fold reduction, compared with the conventional RAQRs. Furthermore, the RMSE of distance estimation is $634$-fold smaller than that of the root-CRB of classical RF receivers, showing the superior performance of the MC-RAQR. This demonstrates its compatibility with waveforms such as orthogonal frequency-division multiplexing (OFDM) and its significant advantages for multi-carrier signal reception.

eess.SP↗
arXiv2026

Channel Estimation in MIMO Systems Aided by Microwave Linear Analog Computers (MiLACs)

Microwave linear analog computers (MiLACs) have recently emerged as a promising solution for future gigantic multiple-input multiple-output (MIMO) systems, enabling beamforming with greatly reduced hardware and computational cost. However, channel estimation for MiLAC-aided systems remains an open problem. Conventional least squares (LS) and minimum mean square error (MMSE) estimation rely on intensive digital computation, which undermines the computational advantage offered by MiLACs. In this letter, we propose efficient LS and MMSE channel estimation schemes for MiLAC-aided MIMO systems. By designing the training precoder and combiner implemented by lossless and reciprocal MiLACs, the proposed schemes perform LS and MMSE estimation in the analog domain, leaving only simple digital scaling. They achieve identical estimation performance to their digital counterparts while significantly reducing computational complexity. Numerical results verify the effectiveness of the proposed schemes.

eess.SP↗
arXiv2026

Joint Subcarrier Phase Recovery for Nonlinearity Mitigation

We propose a low-complexity phase recovery scheme that simultaneously mitigates laser phase noise and fiber nonlinearity across several subcarriers. In a long single-span link with Raman amplification, the scheme achieves 0.9 dB gain with 99 real multiplications per complex symbol.

eess.SP↗