Search arXivSearch

arXiv · 2605.28373

FARSim: a fast RF-chain-aware trigger-screening surrogate for radio detection of ultra-high-energy cosmic rays

Abstract

Radio arrays provide a scalable route to detecting extensive air showers from ultra-high-energy cosmic rays, but trigger studies for candidate layouts are expensive when every energy, arrival direction, core position and trigger configuration is evaluated with full radio simulations. We present FARSim, a fast surrogate framework that reuses a reduced library of ZHAireS reference footprints to reconstruct ground-plane radio emission and to estimate trigger-relevant observables. The method combines vector geomagnetic and charge-excess field decomposition, geomagnetic-angle and energy scaling, geometrical projection, contour-based core sampling and event-rate integration. We validate the reconstructed field footprints and trigger regions against dedicated ZHAireS simulations, and quantify the computational gain obtained by replacing repeated full shower simulations with fast footprint queries. We further extend the peak-field surrogate to time-domain electric-field synthesis by combining the predicted three-component peak-field vector with geometry-dependent normalized pulse templates. Propagating these traces through an RF-chain response enables voltage-domain threshold and L1-trigger diagnostics. For the validation samples considered here, the time-domain extension reaches a median vector-waveform R^2 of 0.986 over 2112 held-out ZHAireS traces when tested at the true peak amplitude. FARSim is therefore intended as a rapid, physics-informed screening layer for array-layout and trigger studies; absolute exposure predictions and detector commissioning remain the role of full end-to-end simulations.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Xin Xu, Pengfei Zhang, Fufu Yang, Pengxiong Ma, Ramesh Koirala, Chao Zhang. 2026-05-29. FARSim: a fast RF-chain-aware trigger-screening surrogate for radio detection of ultra-high-energy cosmic rays. https://arxiv.org/abs/2605.28373

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Performance characterization of a new Structural and Thermal Architecture for a future spaceborne Closed-Cycle Dilution Refrigerator

A Structural and Thermal Model (STM) has been developed to support the new spaceborne Closed-Cycle Dilution Refrigerator (CCDR), which aims to provide continuous cooling at 100~mK for long-duration astrophysical missions. The STM is based on a hexapod architecture that ensures both thermal decoupling and mechanical robustness during launch. In this paper, we present the characterization of its thermal and mechanical performances. A dedicated experimental setup was used to investigate the thermal behavior of the STM across a broad temperature range. The study reveals limitations of the collar design, with incomplete power interception from thermal boundary resistances and vibration test failure traced to defective strut gluing. These results guide the next STM iteration with optimized collar and strut assembly for reliable CCDR operation in space.

astro-ph.IM

The Simons Observatory: Development of a Pipeline to Detect Rapid Transients in Time-Ordered Data

We introduce a method for detecting astrophysical transients evolving on timescales of milliseconds to minutes using cosmic microwave background (CMB) survey telescopes. While previous transient searches in CMB data operate in map space, our pipeline directly processes the raw time-ordered data, enabling sensitivity to fast, dynamic signals. We integrate our detection approach into the Simons Observatory time-domain pipeline and assess the performance by injecting symmetric, stellar flare-like light curves into simulated observations. For events flaring with a timescale of 0.5 s, the pipeline detects $\gtrsim90$ % of events at flux densities of 800, 1150, 1650, and 4250\,mJy when measured in the 93, 145, 225, and 280 GHz bands respectively. At a fixed peak flux density, the pipeline more readily detects longer flares. The limiting flux density for 90 % completeness is four times lower for a $\ge5$ s flare than for a 0.5 s flare, while the flux density limits for $\gtrsim50$ % detection efficiency are comparable to the rms noise of the time-ordered data. We are able to determine the position of detected events in each observing band, with a positional uncertainty at the detection threshold comparable to the telescope resolution at that band. These results demonstrate the readiness of this pipeline for incorporation into upcoming Simons Observatory data analyses.

astro-ph.IM

Thermal conductivity of various CFRPs from 100 mK to 20 K

Carbon-fiber-reinforced polymers (CFRPs) are some of the most useful materials for building spacecraft and aerospace tools. They are especially valuable for systems that work at extremely cold (cryogenic) temperatures because they are strong, lightweight, and don't transfer heat easily. In this study, researchers measured how well heat moves through several different types of carbon fiber samples, specifically T300, T700, HS40, M55J, and IMA, at different fiber layouts and densities. These measurements were taken at ultra-cold temperatures ranging from 100 mK to 20 K. The team used a newly developed analysis method to calculate the thermal conductivity for each sample. Finally, they shared how each material behaved at different temperatures and compared their findings to previous research.

astro-ph.IM