Search arXivSearch

arXiv · 2605.28558

Development and Characterization of a Time Projection Chamber Prototype for Neutron Oscillation Searches at the European Spallation Source

Abstract

A compact time projection chamber (TPC) prototype was studied for charged-pion tracking in the annihilation detector proposed for the HIBEAM experiment at the European Spallation Source. HIBEAM aims to search for neutron-antineutron oscillations, where a produced antineutron would annihilate on a carbon target and produce a pionic final state. A tracking algorithm was developed and validated using cosmic-particle measurements expected to be dominated by atmospheric cosmic muons, proton elastic-scattering data from the Cyclotron Centre Bronowice, and simulated TPC event data. Cosmic measurements provided a minimum-ionising reference for pion-like tracks, while proton-scattering data tested reconstruction in a more highly ionising environment. Simulated crossing-track events were used as a stress test of complex topologies. The algorithm performed reliably for well-separated tracks, while crossing or overlapping tracks and dense proton-scattering events reduced performance. In experimental data, reconstructed tracks showed sub-millimetre residual widths, robust charge sharing supporting the zigzag-shaped readout, and uniform measured dE/dx across the drift volume. The truncated-mean track-level dE/dx distribution in cosmic data showed an approximately Gaussian peak with a relative width of about 16%, demonstrating how energy-loss information can be used for particle identification. Tilted proton tracks showed broader residuals in yz, because the pad row signal was extended in time. A sub-centroid refit technique was proposed, using the internal ADC time profile within a pad row instead of a single charge-weighted time position. With four equal-y sub-centroids per pad row, the yz residual width was reduced from 1.30 mm to 0.55 mm. These results validate the initial tracking capabilities of the algorithm and prototype, and provide feedback for the next-generation prototype.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Blahoslav Rataj, Valentina Santoro, Anders Oskarsson, Matthias Holl, Verena Hehl, David Silvermyr. 2026-05-27. Development and Characterization of a Time Projection Chamber Prototype for Neutron Oscillation Searches at the European Spallation Source. https://arxiv.org/abs/2605.28558

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

TCAD + Allpi$\text{x}^2$ Simulation study of MALTA2, a Depleted Monolithic Active Pixel Sensor for future tracking

In this work, a hybrid simulation framework combining TCAD and Allpi$\text{x}^2$ is presented to investigate the sensor properties of MALTA2, a depleted monolithic active pixel sensor designed for future tracking. The study starts from 3D modeling and transient simulations in TCAD, with generic doping profiles and simple well structures. The resulting doping profiles and electric field are extracted and fed into Allpi$\text{x}^2$ for high-statistics Monte Carlo simulations in both DUT-only and full-telescope mode. Simulations reveal a strong dependence of sensor performance, specifically the detection efficiency and cluster size, on the doping concentration of the N-type blanket at the sensor surface. The doping concentration is then optimized by comparing simulations with measurement data. The active depth of the depleted region of the MALTA2 sensor is estimated in both simulations and measurements using a grazing angle method, in which the sensor is positioned at various inclinations relative to the beam, covering angles from 0 to 60 degrees. Excellent agreement on active depth is obtained with the optimal doping concentration, showing a deviation of 2\% from the measured value at a threshold of 450\,$\text{e}^-$. Consequently, the framework offers a generic toolkit for sensor studies without requiring proprietary information.

physics.ins-det

A compact fibre-coupled active beamstop for fast time-resolved monitoring of synchrotron X-ray beams

We have developed a compact fibre-coupled active beamstop for simultaneous interception and time-resolved monitoring of the direct X-ray beam in synchrotron diffraction experiments. The complete beamstop tip has a maximum transverse dimension of 1 mm and incorporates a 700 $μ$m-wide Ce:YAG scintillator. The scintillator converts the intercepted X-rays into visible light, which is transported through a multimode optical fibre to a silicon photodiode at the bottom of the blade that is connected to a dedicated fast amplifier electronics. Tests with a pulsed laser yielded a system decay time of 69.4 ns, consistent with reported luminescence decay times for Ce:YAG. Measurements at the P14.EH2 end station of PETRA III demonstrated the detection of individual bunch signals separated by 192 ns in the 40-bunch operating mode. The active beamstop also provided an in-situ timing signal for synchronising an experimental sequence with the approximately 190 $μ$s transmission window of a mechanical X-ray chopper. The device therefore combines a compact obstruction of the direct beam with fast monitoring of X-ray timing and flux during diffraction data acquisition.

physics.ins-det

Charge-Carrier transport simulations in diamond detectors with electric-field-dependent mobility and charge-collection-distance-based trapping

Diamond detectors are attractive for operation in harsh radiation environments because they combine radiation tolerance, fast signal formation, and low leakage current. Realistic detector-response simulations require an accurate description of charge-carrier mobility and trapping, which determine both signal amplitude and timing. In this work, we extend \allpix{}, a modular end-to-end detector simulation framework, with diamond-specific transport models. The implementation includes field-dependent mobility parameterizations for electrons and holes and an effective trapping model based on the charge collection distance (CCD), providing a detector-level interface to material quality and radiation-damage measurements. The mobility description is validated in the negligible-trapping limit using single-crystalline CVD diamond by comparing simulated drift velocities and transient-current signals with published reference data. For polycrystalline CVD diamond, the CCD-based trapping model is evaluated using experimentally measured CCD values and compared with laboratory transient-current-technique waveforms. The simulations reproduce the measured drift-velocity behavior in scCVD and the reduced charge collection and degraded transient response observed in pcCVD. The presented implementation enables detector-level studies of charge collection, pulse formation, and timing performance in diamond sensors using experimentally accessible transport and trapping parameters, and provides a practical framework for simulation-driven detector development and radiation-damage studies.

physics.ins-det