Passive transverse forcing of turbulent boundary-layer flow using sinusoidal surface grooves

Max W. Knoop; Bas W. van Oudheusden; Luuk Pelkmans; Ferry F. J. Schrijer

Home/Archive/arXiv

arXiv · 2606.03555

Passive transverse forcing of turbulent boundary-layer flow using sinusoidal surface grooves

Max W. Knoop·Bas W. van Oudheusden·Luuk Pelkmans·Ferry F. J. Schrijer

View original source ↗Read source document ↗Export metadata ↓

Abstract

A surface geometry consisting of parallel, meandering streamwise grooves has been experimentally studied as an alternative means of passive transverse forcing of turbulent boundary-layer flow. Contrary to the original expectation, the flow does not exhibit a spanwise-uniform undulation aligned with the grooves; instead, a converging-diverging flow pattern results. This flow pattern can be attributed to the spanwise periodicity of the lateral pressure gradient. The forcing effect is found to initially increase with the groove amplitude, but it saturates when the groove slope becomes too steep. The observed induced flow, referred to as a Passive Stokes Layer (PSL), can be considered as being composed of an inertial (pressure-driven) outer solution generated by the displacement effect of the non-smooth surface geometry, and a viscous inner solution to accommodate the no-slip condition at the wall. The mechanism of transverse flow generation is elucidated by an inviscid flow model that relates the forcing to the surface geometric properties, with predictions in good agreement with the experimental results. Although a reduction in the near-wall turbulence levels over the groove surfaces is observed, no direct evidence for (mean) drag reduction is evident from the data. Instead, an estimate of the frictional drag potential is based on establishing a tentative relation to an equivalent spatial Stokes layer (SSL) induced by active wall forcing. This theoretical comparison indicates that the induced passive forcing is sufficient to act on the (active) spanwise forcing mechanism, but produces at most a few per cent of frictional drag reduction. Any potential savings are likely offset by pressure drag and other losses, so that, similar to active forcing, its potential for net drag reduction in practical applications is limited.

Explore related subjects

physics.flu-dyn

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Max W. Knoop, Bas W. van Oudheusden, Luuk Pelkmans, Ferry F. J. Schrijer. 2026-06-02. Passive transverse forcing of turbulent boundary-layer flow using sinusoidal surface grooves. https://arxiv.org/abs/2606.03555

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Mathematical modeling on peristaltic flow of a Prandtl fluid with effects of slip conditions and inclined magnetic field

The manuscript provides a description of a theoretical analysis of a non-Newtonian Prandtl fluid subject to peristaltic flow through an inclined asymmetric channel. We explore the effect of an inclined magnetic field on the peristaltic flow. This is relevant for applications involving fluid flow in narrow, inclined (tilted) tubes similar to blood vessels or the digestive system. The model also includes thermodynamic aspects such as heat diffusion (the Soret effect) and viscous dissipation resulting from wall-fluid slip conditions, which may help optimize medical devices such as lab-on-a-chip systems and dialysis machines. In this study, the concentration of a generic chemical, temperature, and fluid velocity are taken into account through mass, heat, and momentum balances, respectively. The solution is approximated using numerical techniques suitable for long wavelengths (low frequency) and low Reynolds numbers. The study also discusses trapping phenomena, which are crucial from a clinical point of view. The developed insights can improve the understanding of physiological flows in the gastrointestinal tract and blood vessels. By understanding how the fluid moves and how particles are trapped, these insights may contribute to the design of improved medical pumps and artificial organs. Graphical visualizations are provided for the fluid velocity profile, temperature distribution, and concentration of a generic chemical. Furthermore, the numerical results are validated through comparison with a closed-form solution from a benchmark problem.

physics.flu-dyn↗

arXiv2026

Discovery of a dispersion model at high Peclet numbers

Peclet number characterises the transition from classical Taylor-Aris dispersion to convection-dominated longitudinal solute transport, with the classical model becoming inadequate at extremely high radial Peclet number $Pe_r$. We develop a novel explicit-closure one-dimensional (1-D) effective dispersion model for this high-$Pe_r$ regime by introducing two closure coefficients, $θ_u$ and $θ_d$, whose functional structures are identified using low-frequency transfer-function matching and a modified Kolmogorov-Arnold network (KAN). The resulting model captures the transition from classical Taylor-Aris dispersion at low $Pe_r$ to convection-dominated dispersion at high $Pe_r$. Analysis reveals that, in the high-$Pe_r$ regime, axial transport is redistributed between the effective convection flux and the dispersive flux, resulting in a reduced macroscopic convection velocity. Numerical validation demonstrates close agreement with the convection-diffusion model over the investigated high-$Pe_r$ conditions, while the classical Taylor-Aris model exhibits substantial deviations. Application of the proposed model to averaged flow velocity inversion further demonstrates improved velocity estimation, particularly in the high-$Pe_r$ regime. These results highlight the importance of accounting for non-classical dispersion for reliable contrast-agent-based arterial blood flow velocimetry and provide new insight into high-$Pe_r$ mass transport.

physics.flu-dyn↗

arXiv2026

Optimization of fluid mixing by reinforcement learning using limit cycles of a dynamical system

We propose a method to overcome the difficulties encountered when applying reinforcement learning to fluid mixing processes. The proposed method has two main features: (i) it does not require detailed measurements of the flow state, and (ii) by effectively exploiting a stable limit cycle of a two-dimensional dynamical system (the Li'enard system), it can stably perform optimization without imposing explicit constraints on the control parameters. As an illustrative example, we optimize a process in which a fluid contained in a cylindrical vessel is mixed by periodically rotating the vessel. The resulting optimal vessel motion is physically reasonable: it reverses its direction of rotation before a solid-body rotation state is established. Furthermore, even when the fluid viscosity increases with time during the mixing process, the method can continuously adapt the control parameters to the changing viscosity.

physics.flu-dyn↗