A High-Precision Frequency Locking Method Based on All-Phase FFT Demonstrated on a Crystal Oscillator with Rubidium Clock Reference

Abstract

This article proposes a novel frequency-locking method based on frequency-domain unbiased phase estimation (FDUPE) for high-precision frequency control. By performing weighted recombination of the acquired data followed by Fourier-transform processing, the phase at the center of the data segment can be estimated without bias, making the method suitable for frequency-locking applications. The principle of the proposed method is analyzed, and an electronic prototype is developed to experimentally validate its feasibility. In the prototype, analog-to-digital converters (ADCs) are used for signal digitization, and a field-programmable gate array (FPGA) is used to implement the FDUPE algorithm. A digital proportional-integral-derivative (PID) controller is also implemented on the FPGA to provide feedback for accurate frequency locking. In the experiment, a (10~\mathrm{MHz}) voltage-controlled oscillator (VCO) with a free-running Allan deviation of (1 \times 10^{-9}) at (1~\mathrm{s}) is used as the device under test (DUT), while a rubidium atomic clock with an Allan deviation of (2 \times 10^{-11}) at (1~\mathrm{s}) serves as the high-stability reference source. Experimental results show that the proposed system achieves excellent locking performance, reducing the standard deviation of frequency fluctuations from (12.75~\mathrm{mHz}) root-mean-square (rms) in the free-running state to (0.88~μ\mathrm{Hz}) rms after locking. Correspondingly, the Allan deviation at (10~\mathrm{s}) is reduced from (9.6 \times 10^{-10}) to (1.45 \times 10^{-14}), representing a five-order-of-magnitude improvement in frequency stability.