Search arXivSearch

arXiv · 2606.18821

Track and energy reconstruction algorithms for a time projection chamber with orthogonal fields

Abstract

In this work, we describe the development of track- and energy-reconstruc-tion algorithms for atypical Time Projection Chambers (TPCs) that will be used at the Institute of Experimental and Applied Physics, Czech Technical University in Prague, to search for the anomalous internal pair creation reported by the ATOMKI group. These chambers operate with an inhomogeneous toroidal magnetic field oriented orthogonally to the electric field; we therefore refer to them as Orthogonal-Field TPCs (OFTPCs). Although this configuration distorts the drift of ionization electrons and complicates the resulting electron and positron trajectories, it also offers several practical advantages. We present the most effective of several tested approaches, which employs a simulated ionization-electron drift map for track reconstruction and a Runge--Kutta-based fit for energy reconstruction. Using simulations, we demonstrate that -- under idealized conditions, namely an ideal charge readout with no amplification and no noise and with known initial track positions and directions -- it is possible to achieve a fitted Gaussian width (sigma) better than 1\% in relative energy for both electrons and positrons, after applying corrections for systematic effects that depend on the track parameters.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Martin Vít Vavřík, Babar Ali, Hugo Natal da Luz, Olivier Rousselle, Tomáš Sýkora. 2026-06-17. Track and energy reconstruction algorithms for a time projection chamber with orthogonal fields. https://arxiv.org/abs/2606.18821

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det