Search arXivSearch

arXiv · 2607.18838

Quantitative schlieren imaging coupled with inverse Abel transformation for flow field studies in a cylindrical surface DBD

Abstract

The present work is devoted to the proper application of the schlieren imaging technique, combined with inverse Abel transformation, to record the flow field induced by atmospheric pressure cold plasmas, in a quantitative manner. Theoretical principles, along with meaningful diagrams, design of the schlieren setup, and involved calibration process, are given in detail. It is demonstrated that erroneous conclusions may be reached if Abel transformation is omitted. The concept is employed to study flow field parameters around a surface dielectric barrier discharge, operating in ambient air and having a cylindrical configuration, rather than a typical planar design. Maximum density and lowest temperature equal to 1.24 kg m -3 and 285.4 K, respectively, and lowest density and maximum temperature equal to 1.11 kg m -3 and 318.8 K, respectively, downstream of the driven electrode and close to the surface are identified with respect to the unperturbed air where density equals 1.21 kg m -3 and temperature equals 291.5 $K$. The temperature and density patterns unveil intense perturbations at shorter distances from the surface and lower amplitudes of the sinusoidal (10 kHz) voltage that sustains the discharge. Electrohydrodynamic effects seem to dominate over thermal mechanisms in governing the flow field. The importance of the quantitative schlieren technique, as a non-invasive one, in the study of dielectric barrier discharges is justified by the interest that they attract in numerous demanding cases of plasma-assisted flow field control (propulsion, actuators, etc.).

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

K Giotis, A G Makrypodi, P Svarnas, K Gazeli, G Lombardi. 2026-07-21. Quantitative schlieren imaging coupled with inverse Abel transformation for flow field studies in a cylindrical surface DBD. https://arxiv.org/abs/2607.18838

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Two-length spatial correlation function of turbulence in TCV

Spatial correlation functions of density fluctuations are measured in the Tokamak à Configuration Variable (TCV) using a dual-channel Doppler backscattering (DBS) diagnostic. In certain cases, the spatial correlation function exhibits two characteristic length scales. By analogy with nonlinear reduced simulations, the presence of two correlation lengths may be indicative of avalanche-like transport. The correlation functions obtained from DBS are compared with those from short-pulse reflectometry measurements and show reasonable agreement. Both short- and long-range correlations are measured in the same plasma geometry for different heating powers. Short-scale correlation lengths are found to be on the order of 3-5 Larmor radii, while large-scale correlations extend over approximately 5-15 Larmor radii. The correlations are found to decrease towards the very edge of electron cyclotron heated discharges, coinciding with a narrow Er well.

physics.plasm-ph

Direct observation of electron shedding from a laser-plasma accelerator

Laser-plasma accelerators have demonstrated the ability to produce ultrashort relativistic electron bunches with peak currents suitable for compact light sources, ultrafast diffraction, and strong-field studies. However, their performance critically depends on preserving the longitudinal phase-space density of the beam as it exits the plasma accelerator. Here, we report the first direct observation of a previously unresolved process in which a highly charged electron bunch undergoes significant longitudinal expansion and progressively loses electrons during extraction from a laser-driven wakefield accelerator, a phenomenon we refer to as electron shedding. Using femtosecond relativistic electron microscopy, we tracked the evolution of the beam far beyond the accelerator exit and observed the bunch stretching over many plasma wavelengths before shedding electrons during propagation. Particle-in-cell simulations reproduce the observed behavior and reveal that it originates from a combination of effects when a high-charge-density beam exits the accelerator. These dynamics redistribute energy from the beam head into a low-energy tail, thereby reducing the useful peak charge density and ultimately decreasing the efficiency of the laser-plasma accelerator. Our results provide new insight into beam extraction and phase-space evolution in laser plasma accelerators and highlight the importance of controlling these collective effects for future applications.

physics.plasm-ph

Pfirsch-Schlüter Current

The Pfirsch-Schlüter current is a current that flows along the magnetic field lines in a toroidal plasma equilibrium that is required to make the plasma current density divergence free in the presence of a plasma-pressure gradient. A distortion in the plasma shape is caused by the Pfirsch-Schlüter current, and it is desirable to minimize both the strength and the distance this current flows along the magnetic field lines. The Pfirsch-Schlüter current is localized within a half period of a stellarator when $d\ell/B$ integrated over the half period is the same for all lines in the magnetic surface. It is shown that within parts in a thousand this is the same condition as the distance $\ell_{s}$ required for a field line to cross the half period being the same for all lines in the surface. To make the $\ell_{s}$'s the same, the lines started on the small major radius side of the plasma must undergo wiggles to make their $\ell_{s}$ as long as those started on the outboard side. This is generally achieved using modular coils with a large helical component on the small major radius side but could be achieved with a central column carrying a helical current.

physics.plasm-ph