Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2607.25582

Stress Drops Associated with Surface Crack Formation in Photo-aged Polypropylene during Three-Point Bending

Kazuya Haremaki·Yusuke Koide·Takashi Uneyama·Yuichi Masubuchi·Takato Ishida
View original source ↗Read source document ↗Export metadata ↓

Abstract

Using three-point bending, this study investigates surface-crack formation in photo-aged polypropylene (PP) that has a depth-dependent aging gradient. PP undergoes embrittlement under ultraviolet (UV) irradiation, and because the photo-oxidation proceeds inward from the irradiated surface, the embrittlement develops non-uniformly across the specimen thickness. PP specimens were mildly photo-aged by UV irradiation and had not yet developed visible surface cracks. Each specimen was bent in two configurations: with the UV-irradiated ("aged") surface on the tensile side, and with the opposite ("reverse") surface on the tensile side. When the aged surface was on the tensile side, the stress-strain curves exhibited several discrete stress drops, and in-situ side-view observation confirmed that the formation of each new surface crack coincided with a stress drop. In contrast, no clear stress drops were observed when the reverse surface was on the tensile side. These results show that the through-thickness gradient of embrittlement is directly reflected in the bending stress-strain response. Uniaxial tensile testing, the standard method for evaluating mechanical properties, formally assumes a nominally uniform deformation across the cross-section and therefore reflects the spatially averaged response. Three-point bending, by contrast, imposes the largest tensile strain at the specimen surface and thus selectively probes the embrittled surface layer, making it an effective method for detecting the surface embrittlement of photo-aged polymers.

Explore related subjects

cond-mat.soft

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kazuya Haremaki, Yusuke Koide, Takashi Uneyama, Yuichi Masubuchi, Takato Ishida. 2026-07-28. Stress Drops Associated with Surface Crack Formation in Photo-aged Polypropylene during Three-Point Bending. https://arxiv.org/abs/2607.25582

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Transient Elasticity -- A Unifying Framework for Thixotropy, Polymers, and Granular Media

Thixotropic yield stress fluids, such as paint or ketchup, are traditionally viewed as elastic structures that, under shear rates, break into viscous liquids with lumps, and reconnect at rest. An alternative framework is presented here: Upon shear, structural destruction is incomplete, leaving sufficient connections. As a result, elasticity fundamentally underlies their non-Newtonian behavior, though they do appear purely viscous under a steady shear, displaying little direct evidence of elastic rebound---same as granular media and polymers. Consequently, all three are described by the same set of evolution equations, differing only in their parameters. These equations are set up by starting from solid dynamics and allowing the elastic strain $\varepsilon^e$ to relax, which in effect interpolates between solid and fluid behavior, appropriate for systems that display both types of behavior. Incorporating in addition a two-temperature framework, tracking how energy is dissipated in two consecutive stages, yields the nonlinear model of Transient Elasticity (TE). It describes an elasticity that is transient in time yet persistent under shear. Previously validated for polymers and granular media, TE is here applied to thixotropic yield-stress fluids. As shown, it successfully accounts for a wide range of characteristic phenomena, including over- and undershoot, viscosity bifurcation, shear banding, and oscillatory rheography. Given its appropriateness across structurally diverse systems, TE offers a unified, surprisingly general account of non-Newtonian phenomena.

cond-mat.soft↗
arXiv2026

Linear and nonlinear active microrheology of viscous, viscoelastic, and elastic media: A fluid particle dynamics approach

Active microrheology is an effective tool to determine the rheological properties of viscous, viscoelastic, or elastic materials on microscopic length scales. The positional response of an embedded probe particle to an externally applied oscillating driving force allows to indirectly characterize the properties of the surrounding media. We aim to explore the linear and nonlinear response of probe particles in a microrheological setup of planar geometry. For this purpose, we extend the computational method of fluid particle dynamics from viscous fluid-like to viscoelastic and elastic media, including nonlinear regimes. We consider a system confined by solid walls. In this case, we validate the approach by quantifying the linear response in terms of a Jeffreys model. Increasing the amplitude of the driving force, we observe distinct nonlinear effects. They include distorted stress-strain curves and a gradual net drift of probe particles initially positioned close to a wall. This drift vanishes in the viscous fluid-like and elastic solid-like limits, but is manifest for intermediate viscoelastic systems. We further address a setup of two probe particles in the absence of walls. They experience reciprocal pairwise oscillatory forcing. Here, nonlinearities in viscoelastic systems induce a net drift gradually moving the particles further apart from each other. Comparing with real setups, our implementation of the driving force is in line with experimental setups of optical tweezers or active magnetic microrheology.

cond-mat.soft↗
arXiv2026

Reinterpreting ultrafast experiments on supercooled water: Glass transition versus liquid-liquid criticality

Water's anomalous properties have been hypothesized to originate from a liquid-liquid critical point in the supercooled regime, separating high- and low-density liquid states. Experimental verification remains challenging due to rapid crystallization under these conditions. A recent study reported evidence for such a transition, based primarily on a pronounced increase in the heat capacity of rapidly heated low-density amorphous ice. Here, we show that this heat capacity increase can be explained without invoking a liquid-liquid transition. By combining simulations using a machine-learning potential trained on the state-of-the-art MB-pol water model, combined with the Tool-Narayanaswamy-Moynihan (TNM) model of the glass transition, we demonstrate that the observed signal can arise instead from a dynamical effect induced by the mobilization of rotational and translational molecular degrees of freedom during ultrafast heating. We further show that our findings are fully consistent with recent electron diffraction measurements showing structural arrest of supercooled water close to our predicted glass-transition temperature. These results provide an alternative interpretation of the experimental observations and highlight the importance of nonequilibrium glassy dynamics in the interpretation of the behavior of supercooled water on ultra-short time scales.

cond-mat.soft↗