Breaking the brightness barrier: JWST/NIRCam DHS spectroscopy for high-precision time-series observations

Achrene Dyrek; John Stansberry; Louis E. Bergeron; Everett Schlawin; Nestor Espinoza; Brian Brooks; Mario Gennaro; Martha L. Boyer; Russell Ryan; Bryan Hilbert; Munazza K. Alam; Aarynn L. Carter; Norbert Pirzkal; Julien H. Girard; Anton M. Koekemoer

arXiv · 2608.04109

Breaking the brightness barrier: JWST/NIRCam DHS spectroscopy for high-precision time-series observations

Achrene Dyrek·John Stansberry·Louis E. Bergeron·Everett Schlawin·Nestor Espinoza·Brian Brooks·Mario Gennaro·Martha L. Boyer·Russell Ryan·Bryan Hilbert·Munazza K. Alam·Aarynn L. Carter·Norbert Pirzkal·Julien H. Girard·Anton M. Koekemoer

View original source ↗Read source document ↗Export metadata ↓

Abstract

Many of the most scientifically compelling exoplanets orbit bright nearby stars that exceed the brightness limits of existing JWST spectroscopic observing modes. To address this limitation, a new NIRCam Short Wavelength Grism Time-Series mode has been developed by combining the Dispersed Hartmann Sensor (DHS) with a new on-board multistripe detector readout capability. The DHS disperses the incoming light through multiple pupil sub-apertures, reducing the incident flux and providing slitless spectroscopy between approximately 1.0 and 2.3 um. The multistripe readout mode further increases the accessible brightness range (K ~ 2.5 - 5.7 mag, depending on the spectral type of the object), with the previous limit being K ~ 5.7 mag at 1.5 um, by reading only the detector regions containing the DHS spectra, reducing the detector frame time with the standard RAPID readout mode from 10.74 s to 1.36 s over even less when using smaller substripe sizes. Together with the simultaneous long-wavelength grism observations, the new mode provides spectroscopic continuous coverage from approximately 1.0 to 5.0 um for targets as bright as K ~ 2.5 mag. We present the first results of on-orbit commissioning of this new observing mode with the final stage consisting of observations of a full transit of the exoplanet WASP-18b, which allowed us to demonstrate the feasibility of using NIRCam DHS for high-precision time-series observations. The commissioning presented in this paper marks the first deployment of the multistripe detector readout on JWST. Beyond NIRCam DHS, this new capability will be extended to other spectroscopic modes, including NIRISS SOSS and NIRSpec PRISM. Bright nearby stars host many of the highest-priority targets for exoplanet atmospheric characterization, making multistripe an important new capability for maximizing the scientific return of JWST.

Explore related subjects

astro-ph.IM astro-ph.EP

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Achrene Dyrek, John Stansberry, Louis E. Bergeron, Everett Schlawin, Nestor Espinoza, Brian Brooks, Mario Gennaro, Martha L. Boyer, Russell Ryan, Bryan Hilbert, Munazza K. Alam, Aarynn L. Carter, Norbert Pirzkal, Julien H. Girard, Anton M. Koekemoer. 2026-08-04. Breaking the brightness barrier: JWST/NIRCam DHS spectroscopy for high-precision time-series observations. https://arxiv.org/abs/2608.04109

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The Simons Observatory: Development of a Pipeline to Detect Rapid Transients in Time-Ordered Data

We introduce a method for detecting astrophysical transients evolving on timescales of milliseconds to minutes using cosmic microwave background (CMB) survey telescopes. While previous transient searches in CMB data operate in map space, our pipeline directly processes the raw time-ordered data, enabling sensitivity to fast, dynamic signals. We integrate our detection approach into the Simons Observatory time-domain pipeline and assess the performance by injecting symmetric, stellar flare-like light curves into simulated observations. For events flaring with a timescale of 0.5 s, the pipeline detects $\gtrsim90$ % of events at flux densities of 800, 1150, 1650, and 4250\,mJy when measured in the 93, 145, 225, and 280 GHz bands respectively. At a fixed peak flux density, the pipeline more readily detects longer flares. The limiting flux density for 90 % completeness is four times lower for a $\ge5$ s flare than for a 0.5 s flare, while the flux density limits for $\gtrsim50$ % detection efficiency are comparable to the rms noise of the time-ordered data. We are able to determine the position of detected events in each observing band, with a positional uncertainty at the detection threshold comparable to the telescope resolution at that band. These results demonstrate the readiness of this pipeline for incorporation into upcoming Simons Observatory data analyses.

astro-ph.IM↗

arXiv2026

Fitting Moving Objects in Up-The-Ramp Data with Applications to the Roman Space Telescope and JWST

A moving object breaks the fundamental property of constant per-pixel count rates in an astronomical image read out up-the-ramp. In this paper, we show how to fit a moving object's path across a detector as that detector is read out nondestructively. We write the full likelihood function for every pixel subject to a constant count rate plus a time-dependent count rate due to a moving source. Assuming the moving source to be point-like and assuming the effective point-spread function to be known, we are left with four parameters that enter the likelihood nonlinearly: two for position and two for velocity. All remaining parameters can be optimized using closed-form expressions. Our approach extracts maximal information on a moving source's position and speed and enables the source to be accurately removed from the image. We investigate the dependence of flux, position, and velocity precision on the target's speed and the readout pattern. We also find a small, positive bias on the recovered flux due to the need to fit for an uncertain position and speed. Our approach can be used for space-based images with minor Solar system bodies in the foreground, e.g.~from Roman and JWST, or for ground-based observations with satellites in the foreground. We demonstrate the promise of our method with a fit to an asteroid track observed serendipitously by the NIRISS instrument on JWST, comparing it to the performance of the JWST pipeline. Python code implementing our approach is available at https://github.com/t-brandt/moving_source. The total computational cost to fit the track of a moving object is $\sim$1 second on a 2023 Macbook Pro.

astro-ph.IM↗

arXiv2026

Options for Compression of radio interferometry data: lossy compression of visibilities and lossless compression of uv-visibility grids for the MHONGOOSE survey

Next generation radio astronomy telescopes are challenging existing data reduction paradigms. With ever more antennas, larger bandwidths, and sometimes multiple primary beams, they often generate more observed data products than can readily be stored long-term. Thus, data storage becomes a major cost driver and processing constraint. In this paper, we test two methods of addressing this problem: grid-stacking, a two-stage lossless compression solution; and the lossy compression of the raw visibilities before traditional processing. To demonstrate these solutions we utilised a deep imaging pipeline based on software for the ASKAP telescope, ASKAPSoft, but applied to a strong source (NGC1566) from the deep MeerKAT HI spectral line project, MHONGOOSE. The grid-stacking solution reproduces the spectrum from traditional processing to within better than 0.7%, and also allows for the reconstruction of other weighting scales without significant computing costs. In comparison, image-stacking also reproduces the spectrum from the traditional processing, to within better than 3% but with worse image residuals in the cube. The lossy compression, even at a near ten-fold reduction in file size, reproduces the spectra almost perfectly (to better than ~0.01% in all cases). Thus both compression methods are promising solutions, and we discuss considerations for their application.

astro-ph.IM↗