Search arXivSearch

arXiv · 2608.06661

A compact beta particle momentum detector

Abstract

We present the design, development, and first calibration results of a compact beta electron detector for the Quantum Invisible Particle Sensor (QuIPS) experiment. The QuIPS electron detector is designed to reconstruct the full momentum vector of $β$ particles emitted from radioisotope-doped optically levitated nanospheres in ultra-high vacuum (UHV), enabling a measurement of the neutrino momentum and a search for heavy sterile neutrinos. The detector comprises two thinned CMOS detectors for directional tracking and a plastic scintillator read out by silicon photomultipliers (SiPMs) for calorimetry. The entire assembly must operate inside an existing optical trapping vacuum chamber at pressures below $10^{-7}$ mbar, imposing stringent constraints on material selection, power dissipation, outgassing, and compactness. We demonstrate sensitivity to $β$-decay electrons with energies as low as 100 keV and a detection efficiency of 35% above 500 keV, the primary window of interest for a heavy sterile neutrino search. The CMOS tracker resolves the momentum direction at the mrad scale and reconstructs the $β$ emission vertex with sub-mm precision, while the scintillator-SiPM system achieves an energy resolution of 5% at 1 MeV.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

D. Kodroff, M. Hu, K. Adcock, R. Carney, P. Denes, M. Garcia-Sciveres, A. Goldschmidt, V. Gomez, P. Sorensen, T. Villabona, D. Carney. 2026-08-07. A compact beta particle momentum detector. https://arxiv.org/abs/2608.06661

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det