Search arXivSearch

arXiv · 2608.12861

Tropospheric Ducting Prediction based on GFS Model Data at Inyarrimanha Ilgari Bundara, the CSIRO Murchison Radio-astronomy Observatory

Abstract

Tropospheric ducting transports terrestrial RFI over hundreds of kilometres into the ARQZWA at Inyarrimanha Ilgari Bundara, the CSIRO Murchison Radio-astronomy Observatory. We present a ducting prediction method based on vertical refractivity profiles derived from GFS data, validated against seven years of continuous spectrum monitoring between 88 MHz and 2.68 GHz. Per-transmitter basic transmission loss to the site is computed with Rec ITU-R P.452-16 above 100 MHz and Rec ITU-R P.1812-6 below it, over Copernicus GLO-90 terrain, driven at each timestep by the GFS-derived refractivity lapse along the path. Skill is scored as a stratified AUC, computed within month and three-hour strata. The median stratified AUC is 0.724 and 24 of 25 confidence intervals exclude chance. A time-percentage calibration derived from four pilot months transfers without retuning to the full record, and skill is flat through three days of forecast lead. A pooled GBM on the same physical features, augmented by a duct-corridor connectivity metric, reaches a mean test AUC of 0.806 over all 25 channels and 0.799 over the 16 on which the analytical predictor is itself skilled. In-situ LTE cell decoding confirms attribution: 86-97% of over-the-horizon cell detections fall within flagged event hours, the range spanning the four monitored LTE channels, and the decoded network identities match the licensing records. Ship AIS receptions at 162 MHz, each a self-located 12 W transmitter at a known sea position, provide VHF ground truth. The FM channels retain only weak skill, far below the ducting channels, and we attribute their events to near-threshold local sources after excluding ducting, sporadic-E and aircraft scatter. The method enables adaptive scheduling of observations away from frequencies affected by forecast ducting, and drives a live forecast service at the observatory. (Abstract abridged for arxiv)

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Balthasar Indermuehle, Hajime Suzuki. 2026-08-13. Tropospheric Ducting Prediction based on GFS Model Data at Inyarrimanha Ilgari Bundara, the CSIRO Murchison Radio-astronomy Observatory. https://arxiv.org/abs/2608.12861

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Performance characterization of a new Structural and Thermal Architecture for a future spaceborne Closed-Cycle Dilution Refrigerator

A Structural and Thermal Model (STM) has been developed to support the new spaceborne Closed-Cycle Dilution Refrigerator (CCDR), which aims to provide continuous cooling at 100~mK for long-duration astrophysical missions. The STM is based on a hexapod architecture that ensures both thermal decoupling and mechanical robustness during launch. In this paper, we present the characterization of its thermal and mechanical performances. A dedicated experimental setup was used to investigate the thermal behavior of the STM across a broad temperature range. The study reveals limitations of the collar design, with incomplete power interception from thermal boundary resistances and vibration test failure traced to defective strut gluing. These results guide the next STM iteration with optimized collar and strut assembly for reliable CCDR operation in space.

astro-ph.IM

The Simons Observatory: Development of a Pipeline to Detect Rapid Transients in Time-Ordered Data

We introduce a method for detecting astrophysical transients evolving on timescales of milliseconds to minutes using cosmic microwave background (CMB) survey telescopes. While previous transient searches in CMB data operate in map space, our pipeline directly processes the raw time-ordered data, enabling sensitivity to fast, dynamic signals. We integrate our detection approach into the Simons Observatory time-domain pipeline and assess the performance by injecting symmetric, stellar flare-like light curves into simulated observations. For events flaring with a timescale of 0.5 s, the pipeline detects $\gtrsim90$ % of events at flux densities of 800, 1150, 1650, and 4250\,mJy when measured in the 93, 145, 225, and 280 GHz bands respectively. At a fixed peak flux density, the pipeline more readily detects longer flares. The limiting flux density for 90 % completeness is four times lower for a $\ge5$ s flare than for a 0.5 s flare, while the flux density limits for $\gtrsim50$ % detection efficiency are comparable to the rms noise of the time-ordered data. We are able to determine the position of detected events in each observing band, with a positional uncertainty at the detection threshold comparable to the telescope resolution at that band. These results demonstrate the readiness of this pipeline for incorporation into upcoming Simons Observatory data analyses.

astro-ph.IM

Thermal conductivity of various CFRPs from 100 mK to 20 K

Carbon-fiber-reinforced polymers (CFRPs) are some of the most useful materials for building spacecraft and aerospace tools. They are especially valuable for systems that work at extremely cold (cryogenic) temperatures because they are strong, lightweight, and don't transfer heat easily. In this study, researchers measured how well heat moves through several different types of carbon fiber samples, specifically T300, T700, HS40, M55J, and IMA, at different fiber layouts and densities. These measurements were taken at ultra-cold temperatures ranging from 100 mK to 20 K. The team used a newly developed analysis method to calculate the thermal conductivity for each sample. Finally, they shared how each material behaved at different temperatures and compared their findings to previous research.

astro-ph.IM