Search arXivSearch

arXiv · 2608.23605

Demonstration of inkjet-printed targets for activation cross-section measurements: deuteron-induced reactions on strontium up to 24 MeV

Abstract

Excitation functions for the $^{nat}$Sr($d,x$) reactions producing $^{86m,g}$Y, $^{87m,g}$Y, and $^{88}$Y were measured up to 24-MeV deuteron energy using the stacked-foil technique and gamma-ray spectrometry. The $^{nat}$Sr targets were prepared using an inkjet printing method to ensure sufficient uniformity. To the best of our knowledge, this is the first experimental report of excitation functions measured using inkjet-printed targets, demonstrating the applicability of this technique to cross-section measurements. The measured cross sections were discussed in comparison with literature data and TENDL-2023 predictions. Our cross sections were generally consistent with those reported in the previous study, but were slightly higher in the threshold energy region. The TENDL-2023 library generally overestimates the experimental values. We report the experimental cross sections for the $^{nat}$Sr($d,x$)$^{86m}$Y reaction for the first time. These measured cross sections contribute to the refinement of nuclear reaction databases for practical applications.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Akihiro Nambu, Masayuki Aikawa, Yudai Shigekawa, Yousuke Kanayama, Tomohiro Tomitsuka, Sayantani Mitra, Hiromitsu Haba. 2026-08-20. Demonstration of inkjet-printed targets for activation cross-section measurements: deuteron-induced reactions on strontium up to 24 MeV. https://arxiv.org/abs/2608.23605

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det