Search arXivSearch

arXiv · 2609.07270

Magnetic characterization of electronic components for portable atomic sensors using a zero-field optically pumped magnetometry platform

Abstract

We present a zero-field optically pumped magnetometry platform for magnetic characterization of a photodetector (PD) board and a resistance temperature detector (RTD) used in a portable atomic magnetometer. For each component, the static magnetic field along the measurement axis is determined from the shift in the center of the dispersive response, while response distortion caused by off-axis magnetic-field components is assessed from the absorptive admixture. Magnetic-field noise is evaluated based on the quadrature difference in the amplitude spectral density (ASD). The platform achieved a -3 dB bandwidth of 71.5 Hz and a median ASD of 57.6 $\mathrm{fT}/\sqrt{\mathrm{Hz}}$ over 20-70 Hz. For the unpowered PD board, static magnetic fields of approximately 8 nT in magnitude and opposite signs were measured in the front- and back-facing orientations. The back-facing orientation also exhibited a degraded dispersive response consistent with magnetic-field inhomogeneity. The magnetic-noise contributions associated with the PD board were estimated at 36.0 and 63.2 $\mathrm{fT}/\sqrt{\mathrm{Hz}}$ in the front- and back-facing orientations, respectively. By contrast, operation of the RTD readout generated a static magnetic field of -0.6 nT, with no measurable response degradation or additional magnetic-field noise. These results provide guidance for the design and placement of electronic components in portable atomic magnetometers targeting sensitivities below 0.1 $\mathrm{pT}/\sqrt{\mathrm{Hz}}$.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Hyeonjae Kim, Sangkyung Lee, Sin Hyuk Yim, Taek Jeong, Younghoon Lim. 2026-09-07. Magnetic characterization of electronic components for portable atomic sensors using a zero-field optically pumped magnetometry platform. https://arxiv.org/abs/2609.07270

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Sub-Doppler cooling of trapped ions using optical tweezers

We propose a sub-Doppler cooling scheme for trapped-ion crystals in Paul traps. The combination of a hollow tweezer and microwave drive creates an effective two-level system which is cooled through attractive Sisyphus cooling. For ${}^{171}\rm{Yb}^+$ ions, we numerically identify optimal parameters for one- and two-ion crystals, and investigate the cooling rate in ion crystals with up to three ions. Our cooling scheme utilizes a single ion addressed with a tweezer to achieve sub-Doppler cooling of the $N$ axial motional modes perpendicular to the tweezer propagation direction, does not rely on the Lamb-Dicke regime and uses off-resonant light. We reach $1/e$ cooling times for the center of mass mode of $τ_{\rm com}<2$ ms, and a steady-state excitation number of $\bar{n}_{\rm{com}}\approx 0.7$. Our scheme is well-suited as an intermediate stage between Doppler cooling and ground-state sideband cooling, and can be readily realized in trapped-ion platforms.

physics.atom-ph

Effective Conservation and Bistability of Atomic Alignment under Strong Spin~Exchange

We present a phenomenological model of anomalous alignment signals in dense cesium vapor under linearly polarized pumping and fast spin exchange near zero magnetic field. Despite the absence of a conservation law for rank-2 angular momentum, our recent experiments reveal anisotropic narrow resonances, hysteresis, and bistability. We attribute these effects to a stretched state forming a collective mode in which orientation and alignment are bidirectionally coupled. This mode acts as a reservoir, preserving the essential properties of alignment despite rapid spin exchange.

physics.atom-ph

$LS/LSJ$ Hybrid Coupling Framework for Auger Angular Distributions of Experimentally Unresolved Multiplets with Isolated Fine-Structure

We present a hybrid $LS/LSJ$ coupling framework for treating state multiplets in the regime $ΔE_\text{int}\sim\hbar/τ_\text{int} \ggΔE_\text{FS}\ggΓ$, where $τ_\text{int}$ is the collision interaction time, $ΔE_\text{FS}$ the fine-structure splitting, and $Γ$ the natural width. In this regime, the collision interaction is fast compared with fine-structure evolution, whereas the individual $J$ levels are well isolated on the scale of their natural widths. The produced multiplet's alignment is therefore described in $LS$ coupling and then projected onto the individual fine-structure $J$ levels before their subsequent decay, described by $LSJ$ coupling. Applied to the multi-open-shell $1s2s2p\,^4\!P_J$ manifold, which closely satisfies these conditions, the hybrid treatment reveals strong suppression and inversion of the Auger angular-distribution anisotropy relative to the traditional pure-$LS$ treatment. It substantially improves agreement with absolute experimental data while using the same $LS$ production cross sections. This hybrid $LS/LSJ$ framework thus provides the appropriate treatment of state multiplets with isolated fine-structure levels, as it retains the $J$-dependent decay dynamics missing from the traditional pure-$LS$ treatment.

physics.atom-ph